Teng Tools Phillips Head Screwdriver Chart
| Item ID | Size | Tip Type | Blade Length | Overall Length |
| MD940N | PH0 | phillips | 75mm/3in | 171mm/6.7in |
| MD940N1 | PH0 | phillips | 300mm/11.8in | 369mm/14.5in |
| MD947N | PH1 | phillips | 38mm/1.5in | 96mm/3.8in |
| MD947N1 | PH1 | phillips | 75mm/3in | 183mm/7.2in |
What are the different sizes of a Philips screwdriver?
You are likely to need a screwdriver for:
- Computers, small electronics
- Wall socket electrical outlets, light switches, and cover plates
- Changing the air filter or hoses in your car
- Furniture fixtures (cabinet & dresser knobs)
What are some Phillips screwdriver sizes?
- The screwdrivers are designed for maximum comfort and easy handling.
- The screwdriver is rust-resistant.
- The screwdrivers come in various sizes and head styles and are suited to a variety of uses.
How are Phillips head screwdrivers sized?
- Lay the screw down on a flat surface.
- Place a steel rule down the axis of the screw.
- Count the number of thread gaps within 1 inch of the screw.
- Divide the count of thread gaps into the length.
- Place the screw on a flat surface.
- Lay a steel rule between two screw threads and measure across the diameter.
What is the average screwdriver size?
Robertson-head screwdrivers are available in a standard range of tip-sizes, from 1.77mm to 4.85mm. Reed and Prince, also called Frearson, is another historic cross-head screw configuration.
What is the standard screwdriver?
The tool used to drive a slotted screw head is called a standard, common blade, flat-blade, slot-head, straight, flat, flat-tip, or "flat-head" screwdriver. This last usage can be confusing, because the term flat-head also describes a screw with a flat top, designed to install in a countersunk hole.
What size is a #2 Phillips screwdriver?
1/4"The #2 is a 1/4" shaft, perfect for derailleur adjustment screws. It is the most common cross tip ("Phillips") required.
What size is a standard screwdriver bit?
They come in three main sizes – 1/4”, 5/16”, and 3/8”. Sometimes these sizes will be slightly small for the screw at hand.
What screwdriver is used for Phillips head screws?
The use of Pozidriv screwdrivers in Phillips screws works only with screwdrivers that are too small and easily leads to damage of the screw or the tool.31-May-2011
What size is a #1 Phillips screwdriver?
Individual Hard-Handle Screwdrivers 1/8–5/16 in. Phillips, Slotted, Torx, Sq.
What does a Phillips head screwdriver look like?
A Phillips screwdriver has a head with pointed edges in the shape of a cross, which fits neatly into the cross slots of a Phillips screw. Phillips screwdrivers are available in five different sizes, from zero to four. If you don't use the right size, you can easily strip a Phillips screw, making it difficult to remove.03-Feb-2022
What is the size of a standard bit?
There are drill bit sets or packs that usually contain bit sizes that range from 1/16 of an inch to 1/4 of an inch, which are common sizes for home and shop projects. Other sizes of use would include 1/2 of an inch, 7/16 of an inch, 5/16 of an inch and 3/8 of an inch.01-Mar-2017
Are drill bits standard?
Bit size reflects the diameter of the body. Some projects call for specific drill bit sizes, but a bit set that includes sizes from 1/16 inch to 1/4 inch will work for many jobs around the home and workshop. You can add larger bits — 5/16-inch, 3/8-inch, 7/16-inch and 1/2-inch bits — if you need them.
How do I choose a screwdriver size?
Choose the bit size that fills the screw head entirely. A bit that is too big or too small will not seat properly, and you'll end up with a stripped screw.
What size is a #0 Phillips screwdriver?
Precision Phillips Screwdriver, Tip Size #0, Phillips, Ergonomic, Overall Length 6 1/4 in.
How you choose the right size Phillips head screwdriver for a Phillips head screw?
1:142:44How To Choose the Correct Screwdriver - By Stanley ToolsYouTubeStart of suggested clipEnd of suggested clipYou will see the same Phillips. Is a cruciform just a standard cross the fuzzy drive screwdriver hasMoreYou will see the same Phillips. Is a cruciform just a standard cross the fuzzy drive screwdriver has an extra tang that extra Tang leads to less cam out and cam out is where the screwdriver.
Why is a Phillips head screwdriver called that?
The Phillips-head ("crosshead") screw and screwdriver are named after him. ... Phillips' major contribution was in driving the crosshead concept forward to the point where it was adopted by screwmakers and automobile companies. The credited inventor of the Phillips screw was John P.
How many sizes of Phillips screwdrivers are there?
Because there are only five screwdriver sizes, each one corresponds to two or more screw sizes. Phillips head screwdrivers come in sizes indicated by numbers rather than actual measurements, as is also the case with flathead screwdrivers.
Do Phillips screwdrivers fit crosshead screws?
Phillips head screwdrivers only fit in crosshead screws; however, flathead screwdrivers may sometimes fit in crosshead screws as well. ADVERTISEMENT.
What is a Phillips screwdriver?
The Phillips screwdriver has become the standard in many different countries. Phillips drives have become a very popular drive when it comes to precision work , that’s why it is used in electronics and laptops. Phillips screwdrivers can be used on many different cruciform screws.
What is a Robertson screwdriver?
Robertson Screwdriver Sizes. The Robertson drive is commonly referred to as a square drive and is very popular in both electrical and construction fields. Like the Phillips screwdrivers, Robertson drives also make use of a numbering system. Robertson drives have corresponding color codes to make each size easy to identify.
Do you need a full screwdriver set?
A full screwdriver set might seem like it has far more sizes than you will ever need, but then there comes a day where you realize that your screwdriver set is missing a size that you desperately need. It is thus better to buy the sizes that you need most rather than to buy a full set that you later find is incomplete.
What size screwdriver is on the bottom of a Craftsman?
The screwdriver on the bottom is a Craftsman and it says "P-00" on it. The tip is about 2mm wide. One of these screwdrivers cannot be 00 sized.
How wide is a #00000 screw?
There could be a #00000 screw, but it's less than one-hundredth of an inch wide and probably can't take much torque, and a #000000 screw would have a negative diameter, which is obviously impossible. Somewhere buried in an ANSI standard is the physical dimension that determines the driver size.
What is 5. 00 on a screw?
5. 00 refers to the size and angle of the tip. It doesn't say how thick the tip becomes before merging into the shaft. So, yes, these could both be 00 sized, if they fit the same screws; the thicker one just (a) will fit larger 00 screws better than the small one would and (b) won't fit into as small an opening. Share.
Do Phillips screwdrivers have a size?
Phillips screwdrivers are not sized based on the physical dimensions of the tool itself. Instead, they are sized based on the screws with which they fit. Each size will work best with a range of screw sizes, which means the actual size of the tip can vary slightly.
Flat Head Screwdriver Sizes
A flat head screwdriver is also sometimes referred to as a slotted screwdriver. These screwdrivers are the easiest to recognize because of its wedge-shaped end.
Hex Key Screwdriver Sizes
These hex keys are sometimes referred to as Allen wrenches and these screwdrivers usually come in an L-shaped key with no handle. Measurements for the sizes of hex keys are done across the flat parts of the hex.
Robertson Screwdriver Sizes
The Robertson drive is commonly referred to as a square drive and is very popular in both electrical and construction fields. Like the Phillips screwdrivers, Robertson drives also make use of a numbering system. Robertson drives have corresponding color codes to make each size easy to identify.
Phillips Screwdriver Sizes
The Phillips screwdriver has become the standard in many different countries. Phillips drives have become a very popular drive when it comes to precision work, that’s why it is used in electronics and laptops. Phillips screwdrivers can be used on many different cruciform screws.
Torx Screwdriver Sizes
Torx drives are designed to function at higher torques than other screwdriver types and also have a longer lifespan. The Torx drive is sometimes referred to as a star drive due to the resemblance it has with its 6-point star shape. Torx drives have different numbers based upon the different distances between two opposing points.
