Full Answer
Why is it called Mule tape?
Why is it called mule tape?, The name gives the game away. A mule tape is used for pulling things, often if not usually through conduits and other cavities. Things like cables. Furthermore, What is Muletape used for?, Pull tape, also called mule tape, is used for the routing of wires through walls and electrical conduits. It’s made of polyester or yarn fibers that are flattened into a ribbon-like shape to disperse pull load.
Where to buy mule tape?
realize this Frontier is absolutely a mule, not a prototype. More or less cobbled together with duct tape and baling wire, it's not meant to be representative of a finished product, or even a ...
How to cut mule tape?
You can select from:
- Mule Tape
- Detectable Mule Tape
- 3 in 1
- Trace Safe System
How to blow mule tape?
Pull Tape Conduit Blower. This portable Power Line Blower is designed to blow Line Darts through conduit in order to place pull tape or twine in the duct for pulling cable or wire. The 58400 Series blower features a heavy duty three-stage electric motor fitted with non- corrosive components and sealed bearings, delivering up to 95 cfm and 5 psi. Although other line blowers might have a higher cfm rating, the higher pressure rating is key because this will allow a dart carrying pull tape or ...
What is mule tape used for?
Pull tape, also called mule tape, is used for the routing of wires through walls and electrical conduits. It's made of polyester or yarn fibers that are flattened into a ribbon-like shape to disperse pull load. This tool has useful features, such as measurement markings, that facilitate the routing process.
How much can mule tape pull?
400 to 6000 lbs.MULETAPE is offered in tensile strengths varying from 400 to 6000 lbs. Pulling forces vary depending on fill ratio, terrain and underground architecture; actual field conditions should be considered.
What is 1800 lb mule tape used for?
Polyester MULETAPE; 1,800 lbs Strength; 3000' reel Flat, woven, polyester tape used for installing fiber optic, copper, and coaxial cables in underground conduit.
How do you attach mule tape?
3:145:19Tying A Secure Knot When Using Mule Tape - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay so we're attaching it to a clip. All right I pass it through the clip. Let me go line crossMoreOkay so we're attaching it to a clip. All right I pass it through the clip. Let me go line cross over the loop. Okay bring it back through the loop.
Is mule tape waterproof?
Waterproof - Will not Rot or Mildew. Tensile Strength: 1250 or 2500 Lbs.
How do you pull wire with mule tape?
3:404:59Preparing to pull wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimple square knot. That's right. There we go. And this for fun will wrap the tape around that oneMoreSimple square knot. That's right. There we go. And this for fun will wrap the tape around that one or two wraps is all we need. And now we're ready to pull wire.
Is mule tape UV resistant?
Designed for outside usage, so it does not decay, crack, or fade when exposed to sunlight, UV rays, or moisture.
How do you get mule tape out of conduit?
4:225:41vaccuming a string through a pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if it doesn't first succeed just keep kept the plastic. Down to the smallest side that's whereMoreBut if it doesn't first succeed just keep kept the plastic. Down to the smallest side that's where the vacuum will grab it. And then you've got it under control.
How do you attach wire to pull tape?
0:052:49How To Attach Wire To A Fish Tape - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what are we gonna do here is go ahead and attach the individual neutral wires to the hook. AndMoreSo what are we gonna do here is go ahead and attach the individual neutral wires to the hook. And fold them over themselves.
How do you make a wire pull head?
4:0414:28How To Make a Wire Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want the tape to be tight. As you wrap around the wires. If you do it loosey-goosey. The chancesMoreYou want the tape to be tight. As you wrap around the wires. If you do it loosey-goosey. The chances especially when pulling wire it could break loose so you want to get a little bit of a tight wrap.
What is muletape rope?
A: MULETAPE is pre-lubricated, which helps reduce friction and the heat it generates, but MULETAPE’s wide and flat profile is also important. A round rope will concentrate all heat and energy on the small area where the rope comes in contact with the innerduct. MULETAPE is flat, and therefore spreads this heat and energy across a wider area, ...
Why is the rope narrower than the cable and pulling sock?
The rope is usually narrower than the cable and pulling sock and is able to make its way back into the duct, however, because the cable and pulling sock are wider they may not be able to make their way back into the duct. When this happens, the tension rises, the pull becomes more difficult and the rope may break.
Is the MULETAPE cable damaged?
This not only causes a health and safety hazard, the possibility that the cable is damaged is extremely high. In 1999, NEPTCO recreated a typical installation scenario in an above-ground test. The results were just as expected – the rope burned through the conduit in seconds, while the MULETAPE caused no damage.
MULETAPE CALCULATOR
Cable weight is the biggest influence in MULETAPE recommendations, followed by the number of bends and finally the conduit size.
Muletape Calculator Instructions
Thorne & Derrick International are the UK’s leading stockist and supplier of Cable Pulling & Cable Laying Equipment for the installation of underground cables and overhead lines up to 400kV – the products support cable pulling teams to install LV MV HV cables into trench, cable duct, risers and all forms of cable containment.
