List of Measuring Tools
- Ruler. A steel ruler aids the measurement and layout of straight lines. ...
- Measuring Tape. The modern measuring tape's roughly palm-sized casing contains a coiled strip of metal marked with increments of measurement.
- Walking Tape Measure. The walking tape measure, also called "surveyor's measure," records the distance traveled by a wheel.
- Laser Measure. The laser measure offers point and shoot distance measurement. In its most basic form, a laser measure is a hand-held electronic device with a digital display.
- Angle Gauge. The angle gauge, also called "angle finder," measures the angle between adjacent surfaces. The tool appears as two straightedge rulers hinged together at one end.
- Calipers. The mouth of these calipers measures exterior sides while its prongs measure interior sides. The term "calipers" refers to measuring tools that determine the distance between opposite sides.
Full Answer
What are the examples of measuring tools?
List of Measuring Tools
- Ruler. A steel ruler aids the measurement and layout of straight lines. ...
- Measuring Tape. The modern measuring tape's roughly palm-sized casing contains a coiled strip of metal marked with increments of measurement.
- Walking Tape Measure. ...
- Laser Measure. ...
- Angle Gauge. ...
- Calipers. ...
What is the best tool for measuring length?
- BEST OVERALL: BOSCH Blaze GLM50C Bluetooth Laser Distance Measure
- BEST BANG FOR THE BUCK: atolla Laser Distance Meter
- BEST PREMIUM: BOSCH GLM400CL Blaze Outdoor Bluetooth Laser Measure
- BEST COMPACT: Leica DISTO E7100i 200ft Laser Distance Measure
- BEST FOR PROS: DEWALT Laser Measure Tool/Distance Meter (DW099S)
What measuring tools are used by computer engineers?
- Soldering station Weller WES51. ...
- Microscope IND-2Z. ...
- Power Supply HY3005-3 (Very useful, but if I could, I would choose power supply where power rails can be individually switched off)
- Magnifier, Eye glass x7 (Essential)
- Digital Calipper, measure in inch and mm (Very useful)
- Tweezer (Essential)
- 0.5mm Tin (Essential)
- Braid (Essential)
- FLUX (Essential)
What kinds of tools do scientists use to make measurements?
What Types of Technology Do Volcanologists Use?
- Collecting Samples. Collecting samples of rocks and even flowing lava is a standard part of the volcanologist's job. ...
- Monitoring Volcanic Gases. Volcanologists use a device called a tiltmeter to measure tiny changes in the angle of the volcano's slope that might indicate a build-up of gases below the ...
- Monitoring Seismic Activity. ...
- Other Devices. ...
What are tools that are used for measurements?
These are the most commonly used tools for measurement:Rulers.Tape measures.Yard sticks.Meter sticks.
What are the 10 measuring materials?
Vernier Caliper. Vernier Caliper is a widely used linear measurement instrument with the least count of 0.02 mm. ... Micrometer. External Micrometer is also known as Outside Micrometer or External Micrometer. ... Steel Scale. ... Vernier Height Gauge. ... Vernier Depth Gauge. ... Bevel Protractor. ... Dial Gauge (Plunger, Level)
What are the 5 types of measurements?
By understanding the scale of the measurement of their data, data scientists can determine the kind of statistical test to perform.Nominal scale of measurement.Ordinal scale of measurement.Interval scale of measurement.Ratio scale of measurement.
What is measuring tools in TLE?
MEASURING TOOLS AND INSTRUMENTSTest Light- a pocket size tool used to test the line wire or circuit if there is current in it.Micrometer- used to measure the diameter of wires/conductors in circular mils. ... Wire Gauge- used in determining the size of wires/conductors.More items...
Why are measuring tools important?
Measuring tools have been used for centuries, as they are important for understanding distances and enabling us to construct buildings, among other things. There are now many different types of measuring tools used, which can measure anything from angles to temperature to time.
What is the name of the tool used to measure the slope of a slope?
Slope Inclinometer. Also known as ball inclinometers, bubble inclinometers, or tiltmeters, these measuring tools establish the angle or gradient of a slope. In a ball inclinometer, there will be a small ball bearing in a curved tube, which will move to the lowest point in the tube due to gravity.
What is a caliper?
Calipers (or calipers, in the UK) are a common measuring tool that accurately measures the distance between two opposing sides of an object. A caliper will have two adjustable tips that can be pushed up against opposite sides of an object, for example, a tree trunk. When the caliper is removed from the object, the user is able to see from the affixed ruler which measurement was given between the two tips and using the tree as our example, you would then know the diameter of the tree trunk.
How does a laser measure work?
They work by sending out a laser beam at the press of a button, which hits the desired target and is able to measure the distance based on the detected reflection.
What are calipers used for?
Calipers are commonly used in various fields, including forestry, wood or metalworking, medicine, science, and engineering. You can get basic calipers which you take a manual reading from, or digital calipers are also available which give an easy to read measurement on a digital display.
What is a micrometer used for?
Micrometer. This is a measuring device commonly used in mechanical engineering . It works in a similar way to a caliper but can measure the length, depth, and thickness of an object. Like a caliper, the object to be measured is placed between two ends, but this is then measured not by a ruler, but by a calibrated screw.
What is a square tool?
Square. A square is a simple but effective measuring tool that is essential to a number of professions and hobbies. This tool, in its most basic design, takes the form of an ‘L’ shape, made from two rulers, which are fixed together at a perfect right angle.
What is a micrometer used for?
You’ll find micrometers being used very regularly in machine shops and in mechanical engineering circles. It is used to measure the length and depth of an object, as well as how thick it is .
Why is a speedometer important?
Obviously, these speedometers are most popularly used inside of automobiles. If you couldn’t measure the speed that your car is traveling, then it would be very difficult to stay within safe speed limits . Speedometers can be used outside of vehicles as well, for scientific purposes.
Why is a caliper important?
It is a simple measuring tool that is very important when you need accurate data about an object. This is one of the most common measuring tools that has been in use for many years. Even if you’re not familiar with the term calipers, you have likely seen one of these in your lifetime.
What is the purpose of a compass?
If you work as an architect, then you will already be intimately familiar with the compass. It is used to draw circles and can be useful for determining the distance between two points on a map.
Why is it important to check angles?
Checking angles is very important for professionals, and they need to have access to accurate data . In order to pull off a job correctly, you need to make sure that everything is as it should be. An angle gauge is capable of measuring angles so that you can determine if everything is at true level.
How far can a laser measure?
Typically, these laser measures are able to give accurate measurements of up to thirty meters.
Why do we need rulers?
Rulers are used for much more than just school projects, though. Professionals use rulers every single day to help with their work. Whether it is an architect using a ruler to help to design a building, or a construction worker determining if his work is straight, rulers are going to be important.
What is the most common measuring tool?
They have a digital display, and it is always easier to decipher readings on a digital display than a manual one. 3. Calipers. Calipers are one of the most common measuring tools. They have been around for quite a while now.
What is the most basic tool that every household is bound to have?
1. Tape Measure. Tape measures are the most basic tools that every household is bound to have. There are two kinds of tape measures. One is enclosed in a shell, it is meant for the times when the tape is supposed to be extended longer. The other one is simply soft so that it can be curved.
What is an angle gauge?
Angle Gauge. More than a protractor, an angle gauge is used to measure angles very accurately. They are inexpensive than most tools and provide an easy to read the measurement. Since the gauge is digital, it provides you more data than a protractor.
How many degrees can a protractor measure?
It holds the protractor and shows the reading. The other two arms can measure any angle below ninety degree s. You are supposed to place both the arms flat on any surface, of whose angle you will be measuring. After you have adjusted the arms, remove the device from that place, and take the reading.
What is moisture meter?
Moisture Meters. Some pieces of equipment used during construction need to have a certain level of moisture before they can be used. This could be a very important thing to determine before using the material. Sometimes the material could be above or below the required amount of moisture unexpectedly.
What is the purpose of a pressure gauge?
lastly, we have a pressure gauge. They are supposed to measure the pressures of water and air. An air pressure gauge will measure air, and a water pressure gauge is supposed to measure water. For example, an air pressure gauge can be used to check the pressure of air in tires. Conclusion.
What happens if all of our measuring tools are taken away from us?
If all of our tools are taken away from us, our markets will collapse, and in turn, the economy will too. Here are a few basic different types of measuring tools that we come across every now and then. 1. Tape Measure. Tape measures are the most basic tools that every household is bound to have. There are two kinds of tape measures.
1. Ruler
A ruler is a long measuring instrument that is used to measure the length of an object. Generally, rulers are made of iron, mica or wood. This measuring instrument is commonly used by the community and is even considered a necessity for children at school. There are 10 cm- to 100 cm-length rulers. The most common length for a ruler is 30 cm.
2. Roll Meter
The roll meter is an instrument for measuring the length of an object. This tool is similar to a ruler, except that the roll meter has a longer measuring distance of up to 50 meters. This tool is used in the furniture industry to measure wood or planks for furniture.
3. Elbow Ruler
The elbow ruler is a measuring instrument used to measure the length as well as to ensure that the right angle is equal to 90o. In the picture, the elbow ruler can only check the 90o angle, but there is another form of the elbow ruler that has been equipped with an angle-adjusting feature so that it can be rotated to check the angle of the object.
4. Angle Ruler
This instrument is generally used by children at school to measure the angle of an object or to draw angles. Angle arcs are often found during math lessons and are used to solve math problems. Those who are still at school must have had carried or held this instrument.
5. Calipers
A caliper is an instrument used to measure the length, thickness, diameter, and depth of an object. It has a measurement accuracy of 0.1 mm. For example, if we want to measure glass with this tool, we will have the following results:
6. Micrometer
A micrometer is also used to measure the diameter and thickness of an object. However, this tool has a higher accuracy than calipers with an accuracy of 0.01 mm. Therefore a micrometer is used to measure the diameter and thickness of smaller objects, such as coins.
7. Scale
The scale is a measuring instrument used to measure the weight or mass of an object. There are various kinds of scales such as sitting scales, body scales, three-arm scales, digital scales, hanging scales, and others.
Household length measuring tools
I got one, you got one. We all got one. These length measuring tools can be found in many homes around the world. If you are looking for something more exotic, stick around because we saved the weird stuff for last.
Precision length measuring tools
Not your everyday tools. These length measuring instruments measure things with extreme accuracy. Some you can find at your local Walmart while others cost so much if you want one, you’re going to need a few more full-time jobs.
Electronic length measuring tools
Who doesn’t like electricity? These linear measuring tools consist of some of the most advanced measuring technology available.
Specialty length measuring tools
Oh, I see! You’re looking for the weird stuff. Well, the tools below fit the bill. It’s easy to see why you might use a ruler or tape measure but these length measuring instruments are a little more different.
What are the two types of measuring tools used in lathe work?
These types of measuring tools are usually for lathe work operations. Center gauges and fishtail gauges check the angle while grinding the object’s profile. These two gauges are outstanding for hand grinding threading operations. Center gauges are convenient for grinding and setting thread cutting tools.
What is a marking gauge?
In general, a marking gauge helps mark the outline for cutting purposes. The marking gauge structure consists of three different regions: headstock, beam, and a lever or a wedge. There is a variation of marking gauge, the marking gauge with a knife instead of a marking pen is the cutting gauge.
How accurate are calipers?
Calipers can have a resolution down to 0.01 mm (0.0005″), pretty accurate and straightforward. In addition, calipers also have different types such as inside calipers, outside calipers, divider calipers, oddleg calipers, vernier calipers, dial calipers, digital calipers, and micrometer calipers.
What is a bore gauge?
The bore gauges are usually the measuring tools used to measure the different dimensions or bore. Once we insert this measuring tool inside the bore, the instrument’s anvil expands; and we can determine the radius of the hole. We can perform a few tests using bore gauge, such as hole tests, bore mics, cylinder test, hold bore gauges, internal micrometer, etc.
What is a dial indicator?
dial indicator to measure the roundness. A dial indicator is one of the most popular measurement tools both in metal and woodworking places. It usually measures the surface’s flatness, roundness, and run-out tolerances. The pointer moves up and down depending on the exact position on the object’s surface.
What direction does a probe tool move?
The probe tool can only move in the Z direction in the probe mechanism when it omits the X and Y axes. On the other hand, when the probe tool moves in X, Y axes, it misses the Z axes. The CCMM is standard for cylindrical parts such as camshaft, crankshaft, transmission shafts, and some other rotating parts.
What is a gauge block set?
A gauge block set is a combination of varieties of standards. To produce precision lengths, we generally use gauge blocks. The materials used for each of the gauge blocks are tungsten carbide, chromium carbide, or ceramic. When we need a gauge block, we gently put them out and clean them with petroleum jelly or oil.
Why do carpenters use squares?
Likewise, framing carpenters use squares to determine the angles for rafters, rakes, and stair stringers; and furniture makers consult their protractors before laying out dovetails.
How accurate is Bosch angle finder?
Press each of its legs into a corner and get a digital readout to a tenth of a degree. The tool comes with two vials so you can be sure it's level on both sides of the corner as you take a reading.
What is a cast iron protractor head?
Starrett's cast-iron protractor head with chromed-steel rule, on the market since 1908, is a classic machinist's tool for anyone who values precise layout marks. The rotating 180-degree head locks the rule at a desired angle or tells you the exact angle of an existing bevel.