Difference Between H-Rated & V-Rated Tires
- Function. The letter designation on a tire rating is the maximum speed for which the tire is rated. ...
- Identification. H-rated tires are rated for a maximum speed of 130 mph. ...
- Considerations. To support running at higher speeds, V-rated tires will have a stiffer sidewall and slightly firmer ride than H-rated tires.
- History. ...
- Warning. ...
Should I get h or V rated tires?
Which tire to choose? First piece of advice, depending on your budget: try to get the best possible tire ... For example, don't try to substitute V-speed rated tires (which are always more ...
What is the best tire speed rating?
You can glean a bit of info from the tires by reading this rating:
- 500 - The durability rating of a tire, compared to a control tire with a treadlife of 100. ...
- A - This is the Traction rating of a tire, which indicates how well a tire stops in wet conditions. ...
- A - The second letter in the UTQG is the Temperature rating, which indicates how well a tire holds up to extreme heat. ...
What are h and V rated tires?
V Rated Tires
- History. The letters "H" and "V" represent speed ratings. ...
- Types. There are two ways the speed rating will be indicated on the tire sidewall. ...
- Considerations. Car manufacturers optimize the suspension and handling characteristics of a car for the type and size of tires originally installed.
- Benefits. ...
- Warning. ...
What is the difference between 95T and 95h tires?
What does 95T on a tire mean? Tire speed ratings, L thru Y and (Y), indicate the maximum speed the tire should be driven. L is for off road vehicles and indicates a maximum speed of 75 mph. The 95H tire has a higher speed rating compared to the 95T tire. The load index rating, 95, is identical.
Can I use V-rated tires instead of H?
A V-rated car requires a tire designed to operate to a maximum of 149 mph and can thus not be fitted with an H-rated tire. The speed rating system was developed to control the safe speeds at which tires must still perform as per the intended design.
Can you mix H and V-rated tires?
Just remember, never mix and match tires with different speed ratings on your vehicle. This will cause major problems with the handling of your vehicle. If tires of different speed ratings are mounted on a vehicle, the lower speed-rated tires should be placed on the front axle, regardless of which axle is driven.
What does V mean for speed rating?
SPEED RATING V Once the highest speed rating a tire could have, “V” used to represent a maximum of 149 mph (240 kph) or more. Nowadays, it means 149 mph but no higher.
What does V and H mean on tyres?
H: 130mph. V: 149mph. Z: 150+ mph. W: 168mph. Y: 186mph.
What is the difference between 91h and 91v?
The letter is the speed rating. It indicates the maximum speed of the tyre. V tyres have a top speed of approximately 149 mph (240 km/h) and H tyres, approximately 130 mph (210 km/h).
Is a higher tire speed rating better?
A tire's speed rating indicates the optimal speed that the tire can safely maintain over time. In short, it's the fastest speed a tire can handle before it no longer performs as designed. The higher the speed rating, the better control and handling you'll have at higher speeds.
What does H mean on tires?
“H” represents the speed rating, which is how fast the tires can go based on their load capacity. This rating ranges from A – Z. “H” indicates a speed rating of up to 130 mph.
What does H mean on a TYRE?
Each letter denotes the maximum speed a tyre can sustain under its recommended load capacity. In our example, “H” is equivalent to a maximum speed of 130 mph (209 kph).
What's the difference between V and W tires?
This means that a tire with a V-rating, for example, can be driven at 149 miles per hour until it wears out! Less frequently seen ratings are Q 99 mph and R 106 mph- used in some light truck tires. The W rating replaced what was once Z, which was anything above 149 at the time, and is now limited to 168 mph.
Are H-rated tires good?
H-Rated Tires: This is a perfect, average tire for most sedans and commuter vehicles. It might not seem to fit in our chart, but the tire speed rating “H” is rated for up to 130 mph. T-Rated Tires: This tire is often recommended for family sedans and vans. It's rated for up to 118 mph.
What is the difference between 94h and 94V tires?
The H speed rating means good up to 130 MPH (for 10 minutes without damage). The V speed rating is good up to 149 MPH . The OEM tires that come on a TCH are rated 94V (the 94 means load up to 1477 pounds).
What is H speed rating?
An H speed rating indicates the tire is approved for speeds up to 130 mph (210 km/h) under optimal conditions. An H speed rating is at the low end, or start of the performance tire speed ratings.
Should the better tires be on the front or back?
According to Tire Review, new tires should always go in the back. Rear tires provide the vehicle stability, and if they have little tread, then stability is lost.
What do the numbers mean on the tires?
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire's width. The bigger the aspect ratio, the bigger the tire's sidewall will be.
What does speed rating of TYRE mean?
Tyre speed ratings tell you the maximum speed that particular tyre is legally approved for. This measurement ensures that the tyre you buy is appropriate – and safe – for the speed of the car it's fitted on.
What does 94w mean on a TYRE?
Essentially, it means that your tyres will be able to handle a specific maximum speed while carrying a load. Typically, tyres with a W rating can handle a maximum speed of 168 mph.
HOW TO FIND YOUR TIRE SPEED RATING
If you’re wondering what tire speed rating your vehicle manufacturer recommends, simply look in the manual. You might also find it in the driver’s side door jamb, the gas tank hatch, or inside the glove box door – anywhere that lists the right tire code for your vehicle.
DETERMINING TIRE SPEED RATING
Speed ratings are the product of laboratory testing – with simulated speeds and loads. To receive any kind of rating, a tire must demonstrate that it’s capable of sustaining a particular speed. Industry standards govern the process of reaching and maintaining a given speed during a test.
TIRE SPEED RATING SYSTEM QUIRKS AND ANOMALIES
Today’s speed rating system uses letters A through Z. Each letter corresponds to a specific speed. In general, that speed goes up as the rating advances alphabetically. For example, a tire rated “L” is good for a lower maximum sustained speed than one rated “N.”
COMMON TIRE SPEED RATINGS CHART
The following speed ratings are those you’re most likely to encounter for ordinary vehicles. They begin with a maximum speed of 118 mph (190 kph) and increase from there.
Where is the speed rating located on a tire?
You can find a tire’s speed rating on the sidewall, where one will typically see a string of numbers and letters. These are several important codes, such as radial construction, aspect ratio, tire load and speed rating. The speed rating is typically the last letter listed on the sidewall (coming after the load index, which is a number).
What do the letters mean?
Speed ratings go from A1 to Y, with A1 having the lowest rating and Y being the highest, but there are some anomalies. There are eight different A ratings. There are no X, O, or I ratings, and H rating is in the “wrong” place. Also, the ZR rating isn’t truly its own rating, but includes both W- and Y-rated tires.
Does tire speed rating matter?
Yes, it matters because your speed rating indicates how much heat a tire can handle safely. Not following those guidelines can lead to faster wear on the tread, decreased steering response, decreased stopping power and poor driving capabilities in colder conditions.
What are the most common tire speed ratings?
Most commuters and consumers will want either an H, S or T tire. Light trucks may need a tire between the N and T ratings. Sports cars may get better handling with a ZR tire.