how can i widen my converse toes

How can I widen my Converse toes?

• Apply shoe stretch spray to the inside of your shoe to relax the material for stretching.
• Insert the toe block into the toe box of your shoe.
• To widen the shoe, turn the widening handle clockwise to expand the toe block.

Full Answer

How do you stretch out converse?

Though your Converse should stretch out naturally over time and conform to the shape of your foot, you can speed up this process by dunking them in cold water and, with the laces tied tightly, stuff as much material as possible into the center of the shoe where your foot would go.

How to loosen Converse shoes?

The first and quite possibly the most convenient method of loosening a pair of Converse shoes is to wear a pair of thick socks. You can dig out such socks to slowly stretch the material without hurting your feet or affecting the integrity of the shoe.

How can I Make my Shoes wider?

These include blowing hot air onto your shoes with a hairdryer, freezing a bag full of water inside of them, or using a shoe stretcher. Each one of these methods can make your shoes wider within a day or so.

How to use a shoe stretcher to widen shoes?

Here’s a quick guide on how to use a shoe stretcher to widen your shoes: Apply shoe stretch spray to the inside of your shoe to relax the material for stretching. Insert the toe block into the toe box of your shoe. To widen the shoe, turn the widening handle clockwise to expand the toe block.

How to stretch out converse shoes?

Since most Converse shoes are constructed of canvas, it is a slightly stretchable fabric. Though your Converse should stretch out naturally over time and conform to the shape of your foot, you can speed up this process by dunking them in cold water and, with the laces tied tightly, stuff as much material as possible into the center of the shoe where your foot would go. Do not dry the shoes by putting them in the dryer, since this will cause the fabric to tighten and construct, making them fit narrower. Allow to air dry and periodically try to stuff additional materials (balled up socks, wrapping paper, etc. into the foot of the shoe to further stretch it out.

How to make your shoes fit better?

Put on two socks on one foot each. wear your shoes and blow dry them using a hair dryer. Afterwards, walk around a little bit and there it should fit you perfectly.

What is the rubber band on a shoe called?

The rubber sole and band that wraps the base of the shoe (called foxing) is pretty much gonna keep the shoe from stretching in any direction.

What makes shoes fit like a glove?

Between the heat and the alochol , this will make your shoes fit like a glove.

How to make socks not narrow?

Soak a thick pair of socks in 91% Isopropyl rubbing alochol. Put the socks on wet, then put on the shoes that are too narrow. Walking around in them for at least an hour. It also helps to add heat, like from a hair dryer to the outsides of the shoes while you are wearing the alochol soaked socks.

What size shoe should I get for a distorted shoe?

I imagine any successful attempt at stretching them would result in a distorted looking shoe. I would suggest getting a size of half size bigger than you would normally and buying insoles.

How long do you blow dry canvas shoes?

Blow dry for about 10 minutes. Canvas material even shrinks a bit after you wash them. So if you haven't bought that tight shoes yet, then i suggest you to buy a perfect size or else 0.5 inch difference won't bother. Blow drying helps leather shoes a lot to attain sizes.

How can I widen my converse toes?

It is usually a white toe cap made with a rubber material that can look narrow and may likely ruin your feet if you do not widen them.

How much does it cost to stretch converse shoes?

This method is not as cost-effective as others, though because these cobblers will charge between $10 to $20 to stretch your converse shoes.

What is a ball and ring shoe stretcher?

The ball and ring shoe stretcher is usually used by cobblers to widen problem areas . A great example is this FootFitter Ball & Ring Bunion Shoe Stretcher.

Why are converse shoes stretchable?

Most converse shoes are considered stretchable fabric because they are constructed of canvas. But when it comes to the stretching of the shoe, there are two approaches.

What is converse sole made of?

A typical converse shoe is designed with a sole that is usually made of brown rubber, as well as a toe cap that is usually made of white rubber. These materials are not as rigid as leather and would really aid more comfort and versatility.

Why are some of the advantages of converse not visible?

If you have a new converse, some of these advantages are not visible, probably because you are likely to face some hard time while it stretches naturally.

How far away should a hair dryer be from your feet?

However, I must warn that always ensure the hairdryer is at least a few inches away from your feet so you do not end up burning yourself.

How to get converse shoes to fit?

Using a hairdryer, warm all the areas where the shoes feel too tight. Try to flex and wiggle your toes while warming to move the shoe’s material as much as necessary.

How to loosen Converse shoes?

The first and quite possibly the most convenient method of loosening a pair of Converse shoes is to wear a pair of thick socks. You can dig out such socks to slowly stretch the material without hurting your feet or affecting the integrity of the shoe. Get a pair of thick socks and wear them inside your Converse shoes.

Why do you stretch Converse shoes?

There are several reasons why you might want to stretch your Converse shoes; from breaking a newly bought pair to adjusting a pair that’s way too tight. The good news is that we’ve all been there.

How to stretch out shoes?

Alternatively, you can stretch your shoes by filling two zip-lock bags with water. Seal them tightly before putting them into the shoes and setting them in the freezer. The water will expand as it freezes, which will consequently stretch the fabric of the shoe.

How to make converse fit?

While wearers tend to have different tastes when it comes to fit, there are various things you can do to make sure your converse fit well and stay fresh- one of them, and probably the most promising method is stretching.

How to clean a sanded out shoe?

To do this, first, separate the laces from the shoes. Soak the shoes in some warm water and mild soap. This should make the bristles a little gentler. Scrub away any marks on the canvas as well as the rubber outsole. Check that you do not use too much water to prevent water stains and to make the shoes easier to dry.

Where to place ring stretcher on shoe?

Place the ball side of the tool inside the shoe and the ring stretcher on the outside

How to stretch the toe box on Converse shoes?

You can try adding an insert to take up some of the extra room in the shoe, or you can fill in your Converse with toothpaste or baby powder. Make sure that you do not get any of these products on the part of your shoes that touches your foot, because it could cause irritation while you are wearing them.

What is Toe Box of Shoes?

The toe box is the area at the front of a shoe that contains the toes. It may also contain padding or extra space to give your toes room to wiggle and move about freely. Some people find that they run into problems with their feet feeling tight if they have a narrow toe box. This usually causes them discomfort, pain, numbness, and sometimes even blisters . It doesn’t have to be this way though stretching out a shoe’s toe box is one solution to these problems

What is a shoe stretcher?

A shoe stretcher is a simple device, typically made of wood or metal, that can help stretch out the width of your shoes so they fit more comfortably. The width of some shoes may be too wide for you to fit comfortably in them, which causes foot cramps and an uncomfortable walking experience. There are many different shapes and sizes of shoe stretchers available online or in stores.

How to make sure your shoes are not damaged?

There are a few things you can do to make sure that your shoes will not get damaged from the stress of the big toe. If it is leather, make sure that you waterproof it to prevent damage. You can then try a shoe stretcher, or a more risky approach called “punching”. If your shoes have fabric on them, this is going to be difficult.

Can a cobbler stretch shoes?

No, a cobbler cannot stretch shoes. The toe box is the area around the toes. A cobbler might be able to fix small damages in this area, but not size it up significantly.

Can you stretch out your shoes?

There are shoe repair services you can go to that will stretch out your shoes for you. They basically remove the material at the front of the shoe so your toes have more room to wiggle. Most of these places charge a small amount for the service.

Can running shoes be stretched?

The first thing you need to know is that a running shoe can be stretched a little bit, but not a lot. A good pair of running shoes will actually break in on their own if you wait long enough, and they will fit very nicely once this happens. If you do not have the patience to wait that long then the best advice is to take your shoes to a cobbler so they can stretch them for you.

How to widen your shoes?

The easiest way to widen your shoes is to walk around in them in your home for about a week. If you’d like to make your shoes wider more quickly, however, you can choose from several simple methods.

How to stretch out a tight shoe?

Heat the area that feels tight with a hairdryer for 20 – 30 seconds . As you blow hot air onto your shoe, move your foot around inside your shoe. Push your foot against the area you want to widen to stretch the material.

How to wear a shoe with a sock?

Try on the shoe with a normal sock once it starts to feel loose. Let your shoe cool down before taking it off. Then, slip off the thick sock and put on the type of sock that you would normally wear with the shoe.

What kind of shoes do shoe stretchers work for?

Shoe stretchers work best for leather shoes, flats, and oxfords, but should work for any kind of shoe, as long as the shoe stretcher you use is narrow enough to fit inside it. ...

How to make a shoe out of water?

Pour water into the bag until your shoe is full. Use a liquid measuring cup or pitcher to fill the bag with water. Once your shoe is full of water, seal the bag securely so that no water will leak out. Pour the water into the bag slowly so that you don’t accidently spill any onto your shoe.

How to make a shoe mold?

Place a sealable plastic bag in your shoe. Position the bag so its bottom is laying on the bottom of the inside of your shoe. Then, use your hand to spread the bag out so that it molds to the shape of your shoe.

How to apply leather conditioner to shoes?

Gently rub the leather conditioner onto your shoe as if you were applying moisturizer to your skin.

How to narrow your shoes?

1. Determine just how narrow your shoes are. Some shoes need a lot of work to stretch them wider. The best way to determine just how narrow your shoes are is by wearing them. Stay with the shoes for minutes and see how the feet feel. If they feel snug but not comfortable, you will definitely need to widen them.

How to stretch narrow shoes?

If the shoes need a lot of stretching, wear a thick pair of socks. With the shoes on your feet, start applying heat on the tight spots. Walk around in the shoes, prance a little to help elongate the fibers. Do the heat process for how to stretch narrow shoes as much as you feel is necessary.

How long can a leather stretcher stay on a shoe?

They can stay there for hours as the solution that they had soaked dries up. In this stretched state, when the leather dries up, the shoe will be stretched enough for your comfort.

What to do if your shoes are too taut?

Pack these materials tightly inside the shoes. Don’t show the shoes any mercy, stuff them up as tightly as they can go. If the upper part of the shoes looks too taut, that is ok. Leather, suede, textile and even canvas have high breaking points especially when they are new.

How to make your shoes not tight?

Just get a pair of thick socks, wear them and put on the shoes. Get a hairdryer, make sure it is working and plug it in. You can find a footstool to step on. Note the places where you feel the shoes are too tight.

How to get tight spots out of shoes?

Keep it moderate. If you can mark the spots that need to be widened a bit, you may not even need to wear the shoes. Just try to pull them with your fingers as you heat them .

Can you stretch leather shoes?

You did not realize they are too narrow for your feet. In this short article, you will learn about shoe stretchers and how to widen tight shoes. Leather, rubber, faux leather, suede and even cloth work boots can be stretched.