Concrete driveway cost
| Size | Square feet | Average cost |
| 10x20 Driveway (1-Car) | 200 | $800 – $1,600 |
| 12x24 Driveway (1-Car) | 288 | $1,200 – $2,300 |
| 20x20 Driveway (2-Car) | 400 | $1,600 – $3,200 |
| 24x24 Driveway (2-Car) | 576 | $2,300 – $4,600 |
How much does it cost to put in a new driveway?
Dec 31, 2020 Paving an asphalt driveway costs about $3-$5 per square foot . For a standard 10-foot by 20-foot driveway, big enough for a single car, that means you'll spend between $600-$1,000 .
How much does it cost to regrade a driveway?
Preparing the land to build a driveway or road may include:
- Removing an existing concrete driveway costs $2 to $6 per square foot.
- Tree removal costs $250 for trees up to 30' tall, $300 to $700 for trees between 30 and 60 feet, and from $700 to $1,800 to cut down large trees ...
- Tree stump removal costs $2 to $4 per inch of diameter or $60 to $360 per stump.
How much for new driveway?
New driveway cost. A new driveway costs $3 to $12 per square foot on average. The average cost to build a driveway is $1,700 to $6,900 for materials and installation. Driveway prices depend on the size, the material put in (concrete, asphalt, gravel, etc.), and if it's a new install or replacement.
How much does it cost to repave a driveway?
Repaving an asphalt driveway costs $7,000 on average, with a typical range of $4,000 to $10,000.This includes the cost to demolish and remove the old driveway ($1,000 to $3,000) and pave a new driveway ($3,000 to $7,000).
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
Driveway costs 2022
A number of factors determine the cost of a new driveway. ‘In addition to the material used, the cost of a new driveway also varies depending on the size, type, and location,’ says Rinal Patel, licensed realtor and co-founder of We Buy Philly Home.
Driveway costs by material
The material selected for the driveway is an important element in what you’ll pay, and materials fall in a range between $1 and $50 per square foot, according to Bailey, who offers the following guide to the cost of popular materials:
What other driveway costs are there?
Unless you have the skills and equipment to do the work yourself, you will need to call in professionals to build a new driveway. ‘You should expect between $5 and $7 per square foot for labor costs,’ says Bailey. ‘Depending on where you live, labor can end up being up to 50 percent of the total project cost.’
Which other factors impact driveway costs?
The design of the driveway is important. ‘The size, thickness and shape of your driveway will also affect the cost of your project,’ says Bailey. ‘Short, thin and straight driveways generally cost less than long, winding and thick driveways.’
Does a new driveway add value to your home?
A new driveway can add value to your home, so long as it improves your home’s exterior design, and provided that it is a quality installation also. ‘A new driveway that looks and feels nice can attract potential buyers and raise the overall value of your home,’ says Bailey.
What is the cheapest option for a driveway?
If you’re looking for the cheapest option for a driveway, gravel is the answer. ‘The least expensive material is gravel, specifically recycled asphalt product or RAP; it is very durable and needs little maintenance,’ says Stephen Keighery, CEO and founder of Home Buyer Louisiana.
What is a new driveway?
A new driveway adds convenience and curb appeal to any home. This driveway installation guide discusses the four most popular material options. It will help you design your drive and stay within budget.
How long does it take to install a 1,000 square foot driveway?
A 1,000 square foot (20’x50’) driveway takes 1-3 days to install when it is gravel, asphalt or concrete. Delays can be caused by inclement weather or scheduling problems with the delivery of equipment or materials.
What is driveway pavers made of?
Driveway pavers are made from a concrete mix poured into forms. Your options include a wide range of shapes, sizes and colors. The pavers are installed on top of the graded and compacted base layer. Slag or sand is poured over the pavers and swept into the cracks for fill.
How long does an asphalt driveway last?
Pros: An asphalt driveway provides a good combination of affordability, durability and curb appeal. With basic maintenance, an asphalt driveway will last 40+ years. When superficial cracks become prominent, a fresh layer of asphalt 1” to 2” thick can be added to refresh its appearance.
Why is asphalt used less in warm climates?
Asphalt is one of the most common materials in cold climates. It is used less in warm climates because it softens in heat. This makes it susceptible to tire tread marks, kick-stand holes and similar damage. An asphalt driveway is 3” of asphalt installed over the base layer of sand/gravel.
How long should a driveway be for a pickup truck?
Most counties do not specify minimum length. Most cars need about 18 feet minimum, but 22-24 feet is better for today’s full-size pickup trucks.
How much does it cost to replace asphalt?
Cost: A new asphalt driveway costs $2.25-$3.50 per square foot. Factors include the depth of the asphalt and the mix used.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does it cost to build a driveway?
The average cost to build a driveway ranges from $1,500 to $11,000, depending on the materials. Higher totals usually relate to the price of supplies and don't necessarily mean it will last longer.
How much does it cost to install a concrete driveway?
Concrete Driveway. Installing a concrete driveway costs $1,800 to $6,000. You can expect to pay $8 to $18 per square foot, depending on customizations like different colors. It is the most popular material because it can last up to 40 years and has little need for maintenance.
How much does a chip seal driveway cost?
A chip seal driveway costs $700 to $3,100, which breaks down to about $5 to $10 per square foot. This surface, also called “tar and chip,” mixes hot asphalt and crushed stones. It’s popular for homeowners who want the appearance and durability of blacktop but have a smaller budget.
Why are pavers higher than concrete?
The total is higher than concrete because of material choices and installation, which takes longer. Pavers come in a variety of textures and colors, so you can choose styles to match your home perfectly. If they break, crack or shift, you may need to replace them.
How much does concrete cost?
Concrete averages $3,000, compared to $4,600 for asphalt. Other cost factors, like the condition of the land or wheater it is a replacement of your existing driveway, can impact the total. Keep these aspects in mind as you research your options.
How much does gravel cost?
At $1 to $2 per square foot, it is the least-expensive material. It is popular in rural areas and can be composed of rock, sand and clay. While laying rocks or a mixture makes installation quick and easy, gravel requires regular maintenance.
Is rubber driveway safe for kids?
This material provides a durable surface that is long-lasting, easy to repair and safe for children. Unlike most driveway options, rubber is non-porous, which means water doesn't drain through it. Make sure you grade the area properly and install an effective drainage system, to lower your risk of flooding.
How much does it cost to install a gravel driveway?
Typical costs: A gravel driveway starts at roughly $0.75-$3 or more a square foot, or $300-$1,000 for a 12'x25' single-car driveway. Costs can double for a roadway-quality driveway. Loose gravel will need replenishing periodically, but a correctly designed, installed and maintained gravel driveway can last 50-100 years or more.
How long is a driveway?
Driveway length is typically a minimum of 20' per car. Because a driveway connects to a public street, there are often regulations governing the width of the driving and the materials used to build it. Typically a permit will be required, and permit fees can vary from nominal to pricey, depending on location.
How much does a macadam driveway cost?
Also called tar and chip or oil and stone, macadam driveway can cost $1-$3 or more a square foot on an existing driveway, or $600-$1,800 for 12'x50'; and $2-$4 or more a square foot for a completely new driveway with gravel base, or $1,200-$2,400 for 12'x50'. Macadam typically lasts 6-10 years and provides the decorative and rustic appearance ...
How wide is a single car driveway?
A typical single-car driveway is 9'-12' wide, and a two-car driveway is 20'-24' wide, according to LandscapingNetwork.com [ 1] ; 9'-wide can be a tight fit for delivery vans or trucks, while wider than 12' but less than 20' is too wide for a single vehicle and not wide enough for two. Driveway length is typically a minimum of 20' per car.
Who installs driveways?
Driveways are typically installed by asphalt, concrete, masonry or paving contractors, although general building or landscaping contractors make take on the task as part of a larger project, and sub out the work. Ask friends, neighbors or local construction companies for recommendations.
What is driveway used for?
A driveway is often the first thing that visitors see and the most-used outdoor area of a home, and is also key to the property's drainage. Depending on the materials used, a driveway can be utilitarian, like gravel, asphalt, or concrete, or decorative, like stamped asphalt, stamped concrete, or cobblestone. A gravel driveway starts ...
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
How much does it cost to stamp a driveway?
A single-car driveway that’s 10 feet by 20 feet could cost $800 to $1,600, but a larger 24-foot by 24-foot driveway averages $2,300 to $4,600. If you choose to stamp decorative designs in the concrete, the costs will increase beyond those averages.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.