Receiving Helpdesk

livestock fence cost calculator

by Cassidy Durgan Published 3 years ago Updated 2 years ago

Larger animals require fortified fencing. Hog panel, bull panel, and cattle fencing cost between $1.25 and $2.50 per linear foot. Vinyl fencing costs between $8 and $20 per linear foot, which is very high compared to other fencing materials.

Full Answer

How much does it cost to build a fence?

The cost depends on a lot of factors. A 150-foot-long privacy fence costs between $1,950 to $7,500 for a standard 1/5-acre yard. On average, pricing for materials ranges from $8 to $25 per linear foot. Labor costs anything from $5 to $15 per linear foot. Expect to pay an extra $300 to $500 if you need to remove your present fence.

How much does a livestock fence cost?

The typical cost of farm fencing is between $2,075 and $2,230. If you have horses, cows, or other farm animals roaming your land, keeping them safe and secure is a number one priority—and that's where a fence comes in. There are many options for farm fencing, but that doesn’t mean they’re all right for you and your livestock.

How do you calculate fence materials?

Wood Fence Calculator

  • Fence Height. ...
  • I nstructions: This form allows you to enter your fence measurements so our program can calculate quantities of posts, rails and pickets required to construct a wood fence from scratch.
  • Maximum Post Spacing. ...
  • Space Between Pickets. ...
  • Example Conversion Chart
  • Number of Rails. ...
  • Single Swing Gate. ...
  • Double Swing Gates. ...
  • Quantity Of Corner Posts. ...

More items...

How much does it cost to fence a yard?

There are many types of fences, including various styles and materials. This results in a wide cost range for installation. The national average cost to install a fence is $3,000 to $7,000, with most people paying around $4,500 to install 200 linear feet of 4’ tall cedar wood picket fencing with a gate.

How much does it cost to build a fence around 1 acre?

The cost to fence 1 acre runs a minimum of $1,050 and a maximum of $33,400 with most homeowners spending an average price of $2,016 to $9,011. The cheapest backyard fence is barbed wire which costs as little as $1,050 an acre, wheres a split rail wood fence costs about $7,000 for 1 acre.

How much does it cost for 200 ft of fencing?

Labor – On average, labor costs to install a new fence range from $5 to $15 per linear foot....Costs To Fence In A Yard By Size.Fence Length (Linear Feet)Average Cost50$650 – $1,250100$1,300 – $2,500150$1,950 – $3,750200$2,600 – $5,000

How do you calculate labor cost for fencing?

Labor rates vary based on the fence material and how much work it takes to install the fence posts. Expect to pay between $30 to $80 per hour for building a fence. Most pros can complete 150 to 200 linear feet within 20 to 35 hours.

What is the cheapest livestock fence?

The strength of wire fencing material is also dependent on how the wires are secured together. The least expensive (and cheapest) wire fencing is welded wire, in which the individual wires are simply spot-welded at their intersection point.

How much does it cost to fence a 1/4 acre?

The average yard fence fits into a range of $2,500 to $4,500, which is based on 200 linear feet, or enough to fence a quarter acre lot. The project cost includes the cost of a site plan, building permits, and workmanship warranty. The average lot size in the U.S. is 17,590 sq.

What is the cheapest fence to build?

PVC fencing. The cheapest way to create a fence for your home is by getting one made from PVC. Such fences substitute wooden pickets and stakes to offer your protection from the outside world. PVC sleeves improve the stability of wooden posts used as a fence, reducing the cost of material and the labor used.

How much is a linear foot of fence?

Types of Fencing Material Cost Per Linear FootWire$1 - $7Vinyl$15 - $30Composite$23 - $37Aluminum$30 - $50Metal$24 - $326 more rows•Mar 17, 2022

How do you calculate linear feet for a fence?

To determine linear footage, count the panels you want stained and multiply by the 6 or 8 (dependent on the spacing on your fence). On short runs between houses that are not a full panel long, it's best practice to just round it up as a full panel length.

How far apart should fence posts be?

8 to 12 feet apartMost fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn't cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

How cheap can you fence a farm?

Cheap farm fence ideasChicken wire fencing. This is a small-weave diamond grid pattern of chicken wire fencing used everywhere to protect poultry enclosures. ... Field fence. ... Barbed wire. ... Electric fence. ... High tensile wire. ... Welded wire. ... Smooth wire fencing. ... Sheep and Goats.More items...•

What fencing is best for livestock?

High tensile wire fencing is effective when used in both smooth and woven wire designs. It is highly durable and flexible, making it a good choice if your livestock regularly knock against the fencing.

What is the cheapest way to fence in cattle?

The Bottom Line: Barbed wire is an inexpensive fencing option when you want to fence in a large pasture for cattle. What is this? It is strong, long lasting and easy to repair. With barbed wire you can also place your fence posts much farther apart, reducing the overall cost of the fence even more.

How many feet is a quarter mile fence?

This publication compares the costs of building a quarter-mile (1,320 feet) straight perimeter fence with four different types of permanent fencing plus temporary interior fencing. These are: woven wire, barbed wire, ...

How tall is a top wire fence?

The top wire shall be at least forty inches in height. Any other kind of fence which the fence viewers consider to be equivalent to a lawful fence or which meets the standards established by the department of agriculture and land stewardship by rule as equivalent to a lawful fence.

How many strands of barbed wire are there in a fence?

Materials for the barbed wire fence (see Table 2) are similar to the woven wire fence except that five strands of 12-gauge barbed wire are substituted for the woven wire and single strand of barbed wire .

How many strands of polywire are used in a polywire fence?

The polywire fence (see Table 5) uses one strand of polywire. With the exception of the end posts, fiberglass rod posts are used and spaced 40 feet apart. One-fourth of the cost of an electric energizer is included in the cost of 1,320 feet of fence, assuming that such a unit would be used to energize at least a mile of fence.

How long does a polywire fence last?

The non-wire/tape components have an estimated life of 25 years; the polywire and polytape will likely last about four to five years. Based on these estimates, the annual ownership cost for a polywire or polytape fence is approximately $0.06-$0.07 per foot.

Is gate included in estimates?

Gates are not included in the estimates. Fencing can be configured in many different ways, using various types of fencing materials. The examples in this publication provide a general comparison between the following five configurations.

What type of fencing is used for sheep?

In general all configurations shown can be used with cattle, woven wire and high-tensile electrified can be used with sheep, and woven wire can be used with hogs. The list of materials needed for each type of fencing is from Costs ...

How many feet is a quarter mile fence?

This publication compares the costs of building a quarter-mile (1,320 feet) straight perimeter fence with four different types of permanent fencing plus temporary interior fencing. These are: woven wire, barbed wire, ...

How far apart are barbed wire posts?

All posts are spaced 12 feet apart with one strand of barbed wire at the top. Materials for the barbed wire fence (see Table 2) are similar to the woven wire fence except that five strands of 12-gauge barbed wire are substituted for the woven wire and single strand of barbed wire.

How many strands of polywire are used in a polywire fence?

Electrified polywire fence (for interior use only) The polywire fence (see Table 5) uses one strand of polywire. With the exception of the end posts, fiberglass rod posts are used and spaced 40 feet apart.

Is gate included in estimates?

Gates are not included in the estimates. Fencing can be configured in many different ways, using various types of fencing materials. The examples in this publication provide a general comparison between the following five configurations. Woven wire fence.

Rather read than calculate?

There are articles just for you! We took all the information from the cost calculator tool and turned it into an easy read.

Design

Get what you have in your head into the tool in no time. Choose from a wide range of material, style and dimensional options to bring your vision to life.

Share

Once you have created an estimate you can easily generate a sharable link which allows you to send your design to anyone.

How Much Does It Cost to Add Farm Fencing per Linear Foot?

The average cost of farm fencing is between $2 and $20 per linear foot. Farm fencing should be at least 5 feet tall, highly visible, and sturdy yet flexible enough not to injure an animal who might run into it. Find professional fencing companies near you that can help you make the right decision to fit your needs.

How Much Farm Fencing Can You Get on a Budget?

Materials and labor are the biggest factors in your farm fencing cost. But even if you’re working on a tight budget, you can still build a fence that works for you and keeps your cows corralled.

How Much Does It Cost to Add Farm Fencing Yourself?

You can definitely build the fence yourself, but keep in mind that improperly built or ineffective fences (as in, ones that let your pigs squeeze right through the rails) will incur higher maintenance costs in the future.

How Much Does It Cost to Install Farm Fencing by Type?

Depending on your needs and what critters you have in your pastures, you’ll need to pick the right type of fence.

Pipe

A pipe fence costs $7 to $10 per linear foot. Pipe fencing is strong enough to hold large livestock including horses and cattle, and when properly installed it can last up to 20 years without requiring much maintenance.

High-Tensile

As one of the most cost-effective fencing materials for livestock, high-tensile fencing is easy to install but requires multiple strands to secure your enclosure.

Wood Post & Board

Traditional and beautiful wood ranch fencing costs $3–$9 per foot, providing security—and pride!—to your farm. Wood has a high upfront installation cost and requires continual maintenance throughout its life, which is around 15—20 years.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9