A Hoover vacuum cleaner won’t power on because of four main reasons:
- A faulty power switch
- Faulty power cord
- A Failed thermal switch
- A faulty motor
Why does my Hoover cordless vacuum keep turning off?
First, the broad reasons why your hoover cordless vacuum keeps shutting off can be: battery runtime, blockages leading to overheating or electrical issues. First, your hoover cordless vacuum might keep shutting off because of overheating.
Why does my vacuum stop working when it overheats?
If a vacuum motor overheats due to poor airflow, the vacuum will automatically shut off. This is most commonly caused by an air passage that is plugged by hair or dirt. Refer to the leaky hose guide to remove the hose, then inspect for hair or dirt clogs. Click to see full answer. Accordingly, why did my vacuum suddenly stop working?
Why should you replace your Hoover vacuum cleaner?
For this, a hoover vacuum cleaner plays an important role as your best buddy so that you can enjoy fresh and pollutant-free air. But sometimes, it does feel like you have hit a mighty rock when suddenly your hoover vacuum stops working and won’t turn on. A faulty vacuum cleaner is the least which anyone can expect in their busy lives.
How long do Hoover Vacuums last?
Hoover vacuums last pretty well somewhere between eight to ten years. However, regular maintenance and special care are the essential factors one should consider to make their machine last long. What Causes Hoover Vacuum to Make Weird Noises?
How do you fix a Hoover that won't turn on?
If it turns on, but won't stay on, chances are your vacuum cleaner is getting too hot. Unplug your vacuum, wait for a little while (consult your manual if you're not sure how long,) and then check for obstructions. If it still dies out, you might need to replace a small thermal fuse.Jul 28, 2015
Do Hoover vacuums have a reset button?
A: No reset button. You must wait for the motor to cool down and reset itself. You should also clean the filter or it will overheat again.Jun 6, 2016
Is there a fuse in my Hoover vacuum?
This is found between the pins in the plug top. Hoover recommend you fit a 13 amp rated fuse in the plug of all of our appliances.
How do I reset my vacuum?
Allow the vacuum cleaner to cool by remaining idle and switched off, with the plug removed from the wall outlet. Wait at least 30 minutes until the thermal cutoff breaker has reset itself. Some brands of vacuum may take longer to reset than others.
Where is the reset button on a Hoover?
Gently push the tip of a pen or paperclip into the opening marked with a triangle and toggle to the proper setting. Then, press and hold the tip into the opening marked with a square until the light turns off. The indicator is now reset. There are also LED resetting instructions located inside the bag housing.Dec 23, 2014
How do you change the power switch on a Hoover vacuum?
0:224:34Hoover UH70120 on/off switch repair. - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have that out you can remove the it that holds the switch. Once that's done remove the twoMoreOnce you have that out you can remove the it that holds the switch. Once that's done remove the two screws on the bottom and separate the unit.
How do you troubleshoot a Hoover vacuum?
1:103:59Hoover Windtunnel 3 Max Pet Plus Troubleshooting and MaintenanceYouTubeStart of suggested clipEnd of suggested clipNow let's talk troubleshooting if you have any issues.MoreNow let's talk troubleshooting if you have any issues.
How do you tell if a fuse is blown in a plug UK?
Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
Why won't my Hoover FloorMate turn on?
If your Hoover FloorMate doesn't power up, make sure it's plugged all the way into the wall and check its fuses. For low suction issues, empty the FloorMate's recovery tank, which may be too full. Make sure the appliance's parts are in correct position for use and clean the FloorMate's filter periodically.
Why did my vacuum just shut off?
A damaged vacuum hose, clogged motor air filter or bad suction motor can cause the vacuum cleaner to shut off during use. A tripped overload on the vacuum suction motor can shut off the vacuum cleaner during use. If your vacuum has a reset button, push it; if the vacuum seems hot, let it cool off first.
Why does my Hoover keep stopping?
Thermal cut out has activated Blockages or dirty filters may cause this to happen, the safety cut off will activate and switch off the electrical supply. If the cleaner has cut out, simply unplug and check for a blockage or dirty filters.
Can a Hoover overheat?
The motor in your vacuum cleaner is essentially safe from damage, however, when it is exposed to conditions other than what it was designed for, it can fail. The most common reason for vacuum motors failing is overheating.
Why does my hoover vacuum keep shutting off?
First, your hoover cordless vacuum might keep shutting off because of overheating. A proper working vacuum cleaner can turn off the motor when it gets too hot. This is because of a built-in thermal that senses the temperatures. If your thermal system is faulty, your cleaner will often overheat while in use and cause it to shut down.
Why is my hoover cordless vacuum shutting off?
Finally, your hoover cordless might be shutting off because of something wrong with its electrical system. To fix, there are a few simple things you can do. First, check if the vacuum has the same problem when tried on a different socket. Check if it is also firmly plugged into the power outlet. The power switch might also be ...
Why does my hoover vacuum overheat?
In a nutshell, overheating usually occurs because of blockages within the cleaner’s compartment. In case of blockages, there is restricted air flow which in turn limits how efficiently the cleaner keeps clean. If you have noticed your hoover cordless vacuum is prone to overheating, here is how to fix it:
What is a Hoover cordless vacuum?
Hoover cordless vacuums are powerful cleaners that easily maneuverable to flick around your home. Two batteries are also provided with the package. They come built to make your cleaning routine as easy as possible without much hassle. Their lightweight further add to the ease of using this kind of vacuums..
How to know if a hoover cordless is overheating?
You can know this by carefully and thoroughly look through all its compartments. Check the filters, tubing, bags and intakes. If there are any things clogging them, this might by blocking air flow for proper cooling and thereby causing overheating.
Why does my vacuum cleaner shut down?
If your thermal system is faulty , your cleaner will often overheat while in use and cause it to shut down. This is because your cleaner will usually collapse when it cannot handle the temperatures it is working at . If you do not fix this overheating, your motor will also continue to chip away in bits.
Does Hoover have a battery?
Hoover cordless is equipped with a stable, efficient battery. Over time, the battery may wane a bit. This is like all electrical appliances. To diagnose and fix battery runtime problems on your hoover cordless here are the steps to follow:
Why won't my Hoover vacuum turn on?
A Hoover vacuum won’t turn on because of a faulty power cable, power switch, motor, or a failed thermal cutout. A vacuum keeps shutting off due to overheating or an electrical problem. Faulty chargers hinder charging, while older vacuums won’t hold a charge due to faulty batteries or chargers.
What happens if a Hoover vacuum doesn't charge?
If the vacuum doesn’t charge, you can rule out the power outlet. Dead batteries. The batteries on Hoover vacuums lose their ability to hold and store charge after a usage period of a year or more. If your unit is older than a year, consider getting a replacement pack. Dirty charger.
How to test continuity on vacuum cleaner?
Test for continuity between each of the blades on the plug with the wire that goes inside the vacuum cleaner. Set a continuity alarm on the multimeter and test the live wires. If there’s continuity between the live wire and the power switch, an alarm will sound. Repeat the process with the neutral wire.
How long do vacuum cleaner batteries last?
According to Hoover’s service page, vacuum batteries lose their capacity to store charge after a year or so of heavy usage. If your vacuum cleaner is older than a year, the batteries might be dead.
How to test if a power switch is faulty?
Here’s how to test the faulty power switch. Connect one probe of the multimeter on one side of the button and the other probe to the opposite side. The switch can be either in an off or on position. If the switch is OK, the alarm will sound. If the alarm doesn’t ring, the switch it’s defective.
Why does my vacuum cleaner turn off after two minutes?
A clogged vacuum cleaner will turn off after running for two minutes to avoid overheating the motor, while one with an electrical problem shuts off randomly.
How to clean carbon buildup on a contact?
Scrape off the carbon buildup gently while ensuring no damage comes to the contact. Use a sharp razor blade or edge to scrape off the carbon buildup, then clean it up with a pencil eraser. Place the pencil eraser on the contact point and spin it around until the contact point is clean and shiny.
Common solutions for: Hoover Vacuum cleaner motor not working
To determine if the switch is defective, use a multimeter to test it for continuity. If the on-off switch does not have continuity, replace it.
The Right Parts for the Job
We carry more than 4 million parts from over 175 major brands, so chances are, we've got the part you need.
What Is Special About Hoover Vacuum Cleaners?
Hoover vacuum cleaners are one of the top leading brands on the market. They offer a pretty decent variety of budget-friendly and long-lasting vacuum cleaners. Their easy-to-use features, advanced suction, and multi-floor cleaning technologies are the key factors for their popularity.
How Long Do Hoover Vacuums Last?
Hoover vacuums last pretty well somewhere between eight to ten years. However, regular maintenance and special care are the essential factors one should consider to make their machine last long.
What Causes Hoover Vacuum to Make Weird Noises?
The vacuum does start making weird loud noises when its filters are filthy. This makes it very hard for your vacuum to remove all the dirt from floors or carpets, and that is the main reason it starts to make loud noises.
Do Vacuum Cleaners With Dust Bag Have Benefit For People With Allergies?
Well, yes! Vacuum cleaners with dust bags have shown relatively better results for people with allergies compared to bag-less vacuums. In vacuums with dust bags, dust particles remain inside the bag, which is not the case for bag-less vacuums.
Essential Tips to Maintain Your Hoover Vacuum Cleaner
Below are some easy tips which you can follow to maintain your Hoover after every cleaning;
Bottom Line
Hoover vacuum cleaners are pretty good to make your house dust-free. However, they do encounter some problems due to excessive use over time.
What to do if vacuum doesn't work?
If it doesn’t, you should take the vacuum to an appliance repair shop to have the brushes replaced or to find out if the motor is irreparable. If it is, you should consider buying a new upright, because the price of a new motor can be quite hefty.
How to tell if a vacuum motor is defective?
You can find out if the motor is defective by using a continuity tester or multitester for the motor’s brushes. Rotate the beater bar or shaft manually by hand.
What to do when your vac is running down?
You can use a multitester as well. If you find problems here, replace the switch with the appropriate piece. The Rotating Brush or Beater Bar: Usually the first thing to go when your vac gets run down. Sometimes the brushes wear down, the roller gets damaged, the drive belt comes loose or the end cap falls off.
What to do if your vacuum is broken?
If it’s broken, replace the case, cap or flange, and maybe even the whole thing if necessary. The Drive Belt: Can become loose from use after a while, as power from the motor is transferred to the beater bar via the drive belt. Some vacuum models have beater bar adjustments that let you tighten or even loosen the belt.
What is an upright vacuum?
Uprights are best for open spaces and carpeted floors. A standard canister is two units that work together as one appliance. The canister of the vacuum carries most of the weight and machinery, including the vacuum motor, fan, bag, filters and sometimes, a cord winder. The power head of the canister is attached via a long hose.
Where is the beater bar on a vacuum head?
Turn the vacuum upside to inspect the beater bar, which should be found at the front end of the vacuum head housing. To lift the beater bar from the housing, remove the clips on the ends and the drive belt.
What are the two types of vacuums?
The two main types are uprights and canisters, and they both work a little differently.
Preventative Tips
Prevention is the best way to keep your Hoover vacuum for a long time. Stop problems in their tracks before they create a domino effect. A clogged filter can cause overheating, which damages the whole vacuum. Tackle the problem before it starts!
Wrapping It Up
Now that you know how to fix Hoover vacuum suction issues, you can repair your vacuum to be as good as new. It’s no secret that vacuums are pricey. By repairing and unclogging the hoses, filters, rollers, and canisters, you can get the most out of your vacuum.
Why does my vacuum shut off automatically?
Overheating motor causing an automatic shutoff. If a vacuum motor overheats due to poor airflow, the vacuum will automatically shut off. This is most commonly caused by an air passage that is plugged by hair or dirt. Refer to the leaky hose guide to remove the hose, then inspect for hair or dirt clogs.
What happens if you have a hole in your vacuum line?
If there is a hole in your vacuum lines somewhere, air will be sucked in there and not from the vacuum hose. Try feeling around the vacuum and see if there suction somewhere other than the hose. Often this will happen around areas like where the bag attaches or at the hose connector.
Why is my vacuum hose clogged?
Vacuum hoses can become clogged by large particles over time. Try following hose replacement guide and inspecting if you have suction where vacuum hose connects. If you have suction where the hose connects but not after the hose, your hose probably has a clog in it.
Why does my vacuum smoke?
The vacuum could possibly smoke if the electric motor is overheating. This is remedied by emptying out the bag and clearing any debris that would block airflow to the motor.
What happens if hair gets stuck in vacuum?
If hair is sucked up into the vacuum and gets stuck on the rotor of the motor, the motor could generate enough friction to create heat and burn the hair. Turn off the vacuum, empty the bag, and feel around for ay hair that would be stuck to the motor.
Blockages and Overheating
Step 1
- First, you need to be sure if your hoover cordless is overheating. You can know this by carefully and thoroughly look through all its compartments. Check the filters, tubing, bags and intakes. If there are any things clogging them, this might by blocking air flow for proper cooling and thereby causing overheating. If you notice any parts that looking like they are melting away, overheating …
Step 2
- Tear apart the compartments and clean them gently. This is so that you clear the vacuum of any blockages in its major components. For the filter particularly, you can run it through lukewarm water. Do this by sliding down the filter cup and lifting the filter. Rinse it for a few minutes and leave it to fully air dry. Leave it outside for at least 24 hours to make sure it is properly dry befor…
Step 3
- Remove the hose from the handle and drop a coin through. See if it falls through the other side easily. You can also use a broom handle to really get into your hose and move any debris in it. By doing this you can be sure that you have pushed everything out. Clogging in a vacuum easily causes shutting down. Another way to check and fix for any blockages in your hose is to shine a …
Battery Runtime
- Hoover cordless is equipped with a stable, efficient battery. Over time, the battery may wane a bit. This is like all electrical appliances. To diagnose and fix battery runtime problems on your hoover cordless here are the steps to follow:
Electrical Issues
- Finally, your hoover cordless might be shutting off because of something wrong with its electrical system. To fix, there are a few simple things you can do. First, check if the vacuum has the same problem when tried on a different socket. Check if it is also firmly plugged into the power outlet. The power switch might also be the issue so have a look at that too. Secondly, check the electri…
Conclusion
- This guide has presented all the ways that you can fix your hoover cordless vacuum if it keeps shutting off. The problem areas are usually blockages causing overheating, battery issues or power fails. Sometimes, consider replacing some parts like the chargers and batteries every once in a while. Also, use your hoover cordless with a bit more tender care. For example, vacuum for h…