How do you apply graphite powder to a Pinewood Derby car? Insert a wheel into an axle. Hold the wheel down. Tap the wheel several times with your finger to move the graphite throughout the wheel. Hold the axle horizontal and spin the wheel with your finger several times. Repeat steps 2 through 4 ...
How do you use graphite on a pinewood derby car?
Rub graphite on your pinewood derby car body where the wheel hub runs against it. Use a new pencil. Rub the tip of the pencil erasor in the graphite then rub in on the car around where the axle goes into the slot. Don't mix graphite and Oil. They do not work well together and will make the car slower.
What is the best lubricant for a pinewood derby car?
Lubricants can make the critical difference between winning or losing a Pinewood Derby race. Our graphite and oil have been formulated to work the best with the plastic wheels and metal axles on your Pinewood Derby car. The fastest dry lubricant available.
What is Pinewood Pro Dry powdered graphite?
Pinewood Pro dry powdered graphite is a high performance, custom blend of micron sized powdered graphite with sub-micron molybdenum disulfide additive which helps the graphite cling to wheels and axles better. This is a superior graphite blend, track tested, and proven to give your car the winning edge.
How do you put graphite in a wheel?
Insert a wheel into an axle. Hold the wheel down. Shake the graphite tube then squeeze out several puffs of graphite into the gap between the wheel and the axle. Tap the wheel several times with your finger to move the graphite throughout the wheel.
How do you use Pinewood Derby graphite powder?
8:3711:11Pinewood Derby Best Graphite Application - Maximum VelocityYouTubeStart of suggested clipEnd of suggested clipAnd this is where we're gonna start graphite. So we're going to take the graphite with our niceMoreAnd this is where we're gonna start graphite. So we're going to take the graphite with our nice little tip applicator. And we're going to squeeze some in right here in between the head and the wheel.
How do you dry graphite lubricant on a Pinewood Derby car?
0:061:12Lubrication | Pinewood Racing Car | PineCar Derby - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor our demonstration. We will use dry graphite. Apply dry graphite between the wheel. And theMoreFor our demonstration. We will use dry graphite. Apply dry graphite between the wheel. And the hubcap. Repeat this procedure until the wheels spin on the axles for several seconds.
How do you apply graphite to a car?
How to apply graphite:Insert a wheel into an axle.Hold the wheel down. ... Tap the wheel several times with your finger to move the graphite throughout the wheel.Hold the axle horizontal and spin the wheel with your finger several times.Repeat steps 2 through 4 several times.Attach the wheel and axle to your car.
How do you use graphite lubricant powder?
0:141:03Best Lubricant for Locks - Graphite Lubricant - Lock LubricationYouTubeStart of suggested clipEnd of suggested clipAnd I'll show you how easy it is to apply. So on the entrance lock we just Center it give it aMoreAnd I'll show you how easy it is to apply. So on the entrance lock we just Center it give it a couple squirts shake it a little put it into the deadbolt. Give it a couple squirts.
How do you keep graphite wheels on a Pinewood Derby car?
3:064:37How to Add Graphite to your PineWood Derby Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake my number one graphite. Maybe a little pile. I got some there remember I will actually just sitMoreTake my number one graphite. Maybe a little pile. I got some there remember I will actually just sit on a block if you can't find something get something nuts nice and smooth what I do is rub it in
What is the best graphite for Pinewood Derby?
Pinewood Pro's dry powdered PRO Graphite is a special blend of ultra-fine natural graphite with sub-micron molybdenum disulfide (also known as “moly”) additive to give you the best graphite blend to minimize friction and make your car the fastest it can be.
Is graphite a lubricant?
Graphite has been used for many years as lubricant [164]. The lubricating mechanism of graphite is thought to be mechanical in nature and results from the sliding of one graphite particle over another graphite particle. Graphite may be used as a dry lubricant or may be dispersed in a lubricating oil.
Where do you find graphite?
Graphite is most often found as flakes or crystalline layers in metamorphic rocks such as marble, schist's and gneisses. Graphite may also be found in organic-rich shale's and coal beds.
Where do you apply graphite grease?
Penrite Graphite Grease can be used in plain bearing locks, latches and fasteners, cables and springs and even as a fifth wheel lubricant. NOTE: Should not be used in wheel bearings or where temperatures are likely to exceed 60°.
Is graphite better than wd40?
A: Although WD-40 is magic stuff, it is not the best choice to lubricate automotive door locks and linkages. Although it does a good job of cleaning and temporary lubricating, it goes away, so it makes a good first step. Graphite has long been a popular lube choice, but we like to use bike chain lube.
Is graphite better than grease?
The greatest benefit to using graphite (rather than oil) is that the graphite leaves no sticky residue that may later attract dust. This is because the lubricating properties of graphite lie in its weak covalent bonds that allow the layers of graphite to “slide” on top of one another with very little resistance.
What is Nyoil II?
NyOil II is a synthetic thin flim lubricant that outperforms powdered graphite over the duration of a race because Nyoil will stay on your axles long after graphite has dropped off. HOWEVER, our track tests showed that our Graphite-Coated Axles outperforms NyOil coated axles.
How to lubricate a wheel?
Simply apply one drop to a pipe cleaner and insert into the wheel bore to lube the inside of the wheel. Rub off excess oil on your axles. Next, put only one drop on each axle. Be sure to wipe excess oil off the axle with a clean cloth.
What to do if your wheel is bad?
If you have a bad wheel and you don't have time to replace it, Raise that Wheel so it doesn't touch the track. Since it doesn't touch the track, it won't have any negative affect on your car's speed.
Does Nyoil II cause drag?
The key to using NyOil II : "less is more" ...in other words, too much oil will cause drag. Only use a drop on each axle and wipe off excess oil. NyOil is added to your axles so it will not interfere with our graphite-coated wheels because the graphite-coating is on the outside tread of the wheel.
Why graphite coat pinewood derby axles?
As a result, the graphite blows off the axle with each run down the track. As the graphite blows off, friction increases, and your car slows down.
Should you add powdered graphite to your graphite coated axles?
Absolutely! When it comes to graphite, more is better. Add PRO Graphite with moly additive to your axles just before your race and spin your wheels by hand (don’t use a Dremel as this will eventually wear down the graphite coating on the axle). If you have grooved axles, then just before your race we recommend squirting more graphite into the wheel bore and not spinning your wheels. The extra graphite gets stored in the axle groove and will disperse as the car travels down the track.
Are graphite coated axles legal?
If your pinewood derby rules allow graphite as a lubricant, then graphite-coated axles are legal because we use the same powdered graphite to coat the axles…we just found a way to make the graphite stick!
How to burnish a car axle?
To burnish your axles with graphite, spin the axle in a drill or drill press and then “rub” powdered graphite into the axle by applying a cloth with graphite to the axle as it spins. Burnishing does not create an effective graphite coating. Here are the reasons burnishing doesn’t work.
Why does graphite spray not work?
Graphite spray easily rubs off your axles because graphite doesn’t stick to metal. The coating will be rub off or fall off after only a few runs down the track. Graphite spray leaves a rough coating.
What lubricant is used in the Pinewood Derby?
Lubricants can make the critical difference between winning or losing a Pinewood Derby race. Our graphite and oil have been formulated to work the best with the plastic wheels and metal axles on your Pinewood Derby car.
What is Krytox 100?
Krytox 100 is a highly-refined synthetic thin-film lubricant with an ultra-low viscosity . It has a tough film strength for long lasting lubrication. When properly applied, it outperforms dry lubricants including graphite.
How to use lubricant on a car?
How to use: Put one drop of lubricant on an axle. Tip the axle so down and let the lube flow to the end of the axle. Insert a wheel into the axle. Spin the wheel several times. Remove the axle and wipe off the lubricant with a clean, soft rag. Reinsert the wheel into the axle and attach to your car.
How to get graphite out of a wheel?
Tap the wheel several times with your finger to move the graphite throughout the wheel. Hold the axle horizontal and spin the wheel with your finger several times. Repeat steps 2 through 4 several times. Attach the wheel and axle to your car.
How to apply graphite to a car?
Graphite should be first applied before the wheels are attached to the car. How to apply graphite: Insert a wheel into an axle. Hold the wheel down. Shake the graphite tube then squeeze out several puffs of graphite into the gap between the wheel and the a xle. Tap the wheel several times with your finger to move the graphite throughout ...
Can you use Krytox on pinewood wheels?
Krytox can be safely used with any brand of pinewood derby wheels. It is colorless, odorless, non-hazardous, and plastic-safe. The key to using a thin-film lubricant is that " less is best ". Applying too much lubricant will slow your car down. Put one drop of lubricant on an axle.
How many scouts did the Pine Car Derby beat?
annual pine car derby races. He beat out 60+ other scouts to come out on
Vitamin K Guest
I have heard that Sailkote works well with graphite, though I have yet to try it personally.
Pacfanweb League Racer
Went ahead and used Pledge again. "Go with what you know". It's served us well the last few years. Webelo II this year... Last crack at the district title tomorrow.
NeedforSpeed Rail Runner
We use the same pledge process. It's done us well the past couple years so like you I'm scared not to do it now. Sometimes I think they are messing with us on that one but without a test track I'll never know. If these guys say spray it with pixie dust I would search the earth for it.
Cubscout Dad District Champion
How long do people let the Pledge stand before wiping off? I know everyone on here uses oil but for a scout race I am asking. Trying to bring my speed up and help other dads in our pack, because we got some sloooow cars. And I want to get pushed to stay on top.
NeedforSpeed Rail Runner
Some let it dry....some spray on on wipe off. I do the latter. Not sure if I'm doing it right though.
Jimmiet99 Pinewood Ninja
Is there a certain pledge that you use. Looked today wasn't sure if there was an unscented one or what
Gtdhw Pinewood Ninja
I'm just a bit skeptical of this, but think we'll give it a try next year. Haven't seen any posts with detrimental results, so it's worth a shot I guess.
Product Description
Pinewood Pro’s dry powdered PRO Graphite is a special blend of ultra-fine natural graphite with sub-micron molybdenum disulfide (also known as “moly”) additive to give you the best graphite blend to minimize friction and make your car the fastest it can be.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
