What is a driveway apron?
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway. Because driveway aprons are regulated by building codes in most communities, replacing yours—because it’s in bad shape or you’d like to widen the driveway—can be complicated.
Do I need a permit to build a driveway apron?
When you apply for a permit to construct a new driveway apron, your local codes may regulate the following: Who can legally install the apron (a homeowner, a licensed contractor, or a city crew). The width and length of the apron. The slope of the apron (water must drain into the gutter).
What happens if my driveway apron is in bad shape?
If your driveway apron is in bad shape (presenting a danger to pedestrians), the local Code Compliance officer may ask you to have it repaired, which may include patching it (to the city’s standards) or replacing it. If you don’t, the city could fix it and then charge you for the repairs.
How much does it cost to build a paving apron?
The cost to build the apron varies, depending on the going rate of labor in your area and whether you can do the work yourself. Asphalt, which must be installed by a paving company, runs approximately $3 to $6 per square foot. The company may also charge a setup fee, which could add another $1,000.
Is the apron part of the driveway?
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway.Oct 5, 2020
What does driveway apron mean?
What is a driveway apron? It's the area where your residential driveway meets the street pavement. You can transform that plain patch of tarmac by tearing up the section above the curb and replacing it with materials that look like they were taken from the streets of Brussels itself.
What is a concrete apron?
A concrete apron, also known as "an approach," is a section of concrete inserted in one of three places: In front of a garage. Around the perimeter of a building. The entrance to a parking lot or driveway.
What is the purpose of an apron around a house?
The apron slab is designed to collect spilt water and rainwater. This water needs to be carried away from the slab and not run off onto surrounding soil. The apron slab should have a raised edge, therefore, and a slope that ensures water is directed to the lowest point at the edge of the slab.Dec 22, 2020
How do you pour a driveway apron?
4:2824:19How to Pour a Driveway Apron Approach Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll we have to do is horizontal curb cut and then dig down six inches sidewalk approach and pourMoreAll we have to do is horizontal curb cut and then dig down six inches sidewalk approach and pour it's real real simple situation there all right let's get down to business.
What is the end of the driveway called?
The component parts of the driveway approach are termed the apron, the end slopes or the curb return, and the sidewalk section.
Is concrete apron necessary?
Why do you Need a Concrete Garage Apron? The concrete garage apron is necessary to provide a transition between the driveway level and the garage floor.
What is a construction apron?
An apron is a raised section of ornamental stonework below a window ledge, stone tablet, or monument.
How do you repair a concrete apron?
How to repair garage floor concrete damage near apron?Use quick-setting cement plus bonding adhesive to repair the large voids from the broken/missing concrete.Fill the crack to a reasonable depth with sand/backer rod and then apply a self-leveling caulking or concrete crack filler.More items...•Aug 19, 2014
How much does a concrete apron cost?
A concrete apron can cost $3-$10 or more a square foot, or $550-$1,800 for 12'x15′. With decorative elements (stamped patterns, a pigmented color, a textured finish) the cost can be $6-$25 or more a square foot, or $1,100-$4,500 or more. Some municipalities will replace a deteriorating apron for a fee.
What is the concrete around a house called?
Explanations. Footings (often incorrectly called foundations) are usually constructed of reinforced concrete that supports the building. They are commonly comprised of concrete strips, stumps with pads, stiffened raft or waffle slabs (Figures 9, 10 and 11).
How do you install a Belgian block apron driveway?
0:011:16Add a Belgian-Block Driveway Apron - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the rough cut granite blocks are in playing with their neighbors. They hammer the blocks downMoreSo the rough cut granite blocks are in playing with their neighbors. They hammer the blocks down into the mortar then remove them dip them and cement slurry. And set them back in place.
What is an apron in a driveway?
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway. Because driveway aprons are regulated by building codes in most communities, replacing yours—because it’s in bad shape or you’d like to widen the driveway—can be complicated.
Who can legally install a driveway apron?
When you apply for a permit to construct a new driveway apron, your local codes may regulate the following: Who can legally install the apron (a homeowner, a licensed contractor, or a city crew). The width and length of the apron. The slope of the apron ( water must drain into the gutter ).
What to do if your driveway apron is bad?
If your driveway apron is in bad shape (presenting a danger to pedestrians), the local Code Compliance officer may ask you to have it repaired, which may include patching it (to the city’s standards) or replacing it. If you don’t, the city could fix it and then charge you for the repairs.
How long is a driveway apron?
Driveway aprons vary in length from about eight to 15 feet (starting at the street and measuring toward the house). Since the apron is a part of the driveway, its width (side to side) is identical to the width of the rest of the driveway—most of the time you can’t tell where the apron starts and the driveway stops.
How big should an apron be for concrete?
If you’re pouring concrete, consider pouring the apron in sections no larger than eight-foot by eight-foot instead of all at once. Pouring concrete is physically demanding and smaller sections are easier to pour. Recruit plenty of helpers when pouring concrete.
How to get a spec sheet for an apron?
Obtain a spec sheet from your local building authority when you apply for your permit and follow it exactly. The spec sheet will give you the allowable dimensions for your apron in addition to its required thickness, the amount of fill and reinforcement, and the type (s) of material you can use.
How much does it cost to install asphalt?
Asphalt, which must be installed by a paving company, runs approximately $3 to $6 per square foot. The company may also charge a setup fee, which could add another $1,000. Expect to pay $3 to $10 per square foot for materials if you want to install a paver or cobblestone apron.
What is the apron on a driveway?
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway. Because driveway aprons are regulated by building codes in most communities, replacing yours—because it’s in bad shape or you’d like to widen the driveway—can be complicated. Keep reading for crucial info before you tackle this curbside project.
Why do you need a driveway apron?
A well-constructed drive way apron facilitates a smoother and less stressful transition from the driveway to the street. Most states require the installation of a driveway apron especially if motorized vehicles use the driveway for entering and exiting. Also, many subdivisions require their residents to build driveway aprons to guide stormwater away ...
What happens if you don't fix your driveway?
If you don’t, the city could fix it and then charge you for the repairs. In winter, the homeowner may also be responsible for removing snow from both the sidewalk and the driveway apron. Check with the local building authority to find out how your community handles these issues.
What is the area on the street side of a sidewalk?
In many communities, the area on the street side of a sidewalk is considered an easement that the city controls. This is the area where you’ll find buried municipal water lines and storm drains. If no sidewalks are present, the length of the apron will vary from community to community, based on local construction codes.
How thick should a driveway apron be?
The thickness of the apron. For example, concrete on the non-apron portion of the driveway should be a minimum of four inches thick, while codes may require the apron portion to be as much as seven inches thick. How much and what type of fill—the sand or gravel—must be used to fill the excavated area before the concrete is poured ...
How big should an apron be for concrete?
If you’re pouring concrete, consider pouring the apron in sections no larger than eight-foot by eight-foot instead of all at once. Pouring concrete is physically demanding and smaller sections are easier to pour. Recruit plenty of helpers when pouring concrete.
How to get a spec sheet for an apron?
Obtain a spec sheet from your local building authority when you apply for your permit and follow it exactly. The spec sheet will give you the allowable dimensions for your apron in addition to its required thickness, the amount of fill and reinforcement, and the type (s) of material you can use.
Why is a driveway called a driveway?
And the reason a driveway is called a driveway is because it's the conduit for a car from the street to the house's garage.
What is the end of a driveway called?
What is the end of the driveway called? Apron – The term “Apron” may be used to describe where an area of one type of material ends and another begins. The term may also be used to describe an area at the end of a driveway that connects to the road. Also asked, what are the parts of a driveway?
What is a driveway apron?
A driveway apron connects the driveway to the sidewalk or the main street. A well-constructed driveway apron facilitates a smoother and less stressful transition from the driveway to the street.
How much does an apron cost?
A concrete apron can cost $3-$10 or more a square foot, or $550-$1,800 for 12'x15'. With decorative elements (stamped patterns, a pigmented color, a textured finish) the cost can be $6-$25 or more a square foot, or $1,100-$4,500 or more. Some municipalities will replace a deteriorating apron for a fee. Click to see full answer.
Buy bread from Schmidt baking co (old tyme brand)
I heard from an acquaintance that this company’s CEO told one of its drivers to hand out all the bread in the truck to the vehicles stranded on I-95.
I made a snowman
A community for Northern Virginia -- Alexandria, Arlington County, Fairfax County, Falls Church, Loudoun County, Prince William County, and the surrounding areas.
Can I park my car in my driveway?
As you'd imagine, there are some common practices. "That driveway belongs to you as the owner, and it's an exclusive-use area because I can't park my car in your driveway," says Barbara Holland, CPM, regional manager for FirstService Residential in Las Vegas. "But I, as an association, can create regulations for those areas. For example, the car can't be leaking oil, you can't be doing work to fix your car on the driveway, and any car parked there has to be in working condition.
Is a driveway a common property?
In my opinion, a driveway leading into a garage for that specific home isn't common property but rather private property for each individual homeowner. I believe each homeowner is responsible for the maintenance and upkeep of their own driveway.
Who owns the sidewalks and curbs?
The homeowner owns the responsibility for maintaining the sidewalks and curbs.
Who owns the street on the peninsula?
This one happens to be on a peninsula. The street is owned by the County to the back of the sidewalk and the other side (River) is owned by the Federal Government (waters of the US). In many cases the street are owned by an Home Owners Association.
How much right of way is behind a curb?
Given a typical 50’ wide residential street right of way with a 27’ wide street, that leaves 11.5 feet of street right of way behind the curb.
How far from the street does the city own?
Depending on the city and the street, the city owns the first twenty feet from the street. You are expected to maintain the grass and shovel the sidewalk in the winter.
How far in from the street do you have to repair a sewer line?
However, if your sewer line breaks, they have to repair in the first twenty feet in from the street.
What happens when a subdivision is built?
When subdivisions are developed, most home lots are divided from the main parcel from a centerline of the street. The developers then build streets granting homeowners access to their respective lots via (planned) easements.
Who is required to maintain sidewalks?
It usually belongs to the city, but the homeowner is required to maintain it. Your property ends where the sidewalk begins.
How to contact SCDOT for driveway apron?
You may also contact the SCDOT Customer Service Center Monday-Friday from 8:30am-5:00pm at 1-855-GO-SCDOT.
What is a sponsor for SCDOT?
Sponsorship includes all costs associated with the project. Traffic calming measures must be approved by 75% petition support or local government approval, and must meet all SCDOT requirements prior to approval by the Department.
Who is responsible for traffic control signs?
Traffic control signs are erected by the agency responsible for the maintenance of the road. You may contact the SCDOT maintenance office in your county to inquire what office is responsible for traffic control signs on your road. Street name signs are erected by counties and cities.
Do drivers expect children in residential areas?
Motorists already expect the presence of children in residential areas, especially at certain times, and studies show that devices attempting to warn motorists of normal conditions, or conditions not always present, fail to achieve the desired safety benefits.
Who is the logo contractor in South Carolina?
The logo program in South Carolina is administered by a private contractor who is responsible for all marketing, construction and maintenance of the program. South Carolina Logos, Inc. (SCLI) is the current logo contractor and they will be glad to explain the logo program requirements, availability, and costs to prospective businesses.
Is a dirt road maintained by the county?
If the road is a dirt road, most likely it is maintained by the county or city where it is located . SCDOT has only a few dirt roads in the State Highway System. You should first contact the county public works department for the county where the road is located.
