What is purple drywall?
Designed for installation in areas with high moisture, the material provides an extra protection against mold and mildew versus standard drywall. The process for installing purple drywall is the same as standard drywall. Besides its mold and mildew resistant properties, purple drywall is also fire-resistant.
Which side of the drywall should face out?
The other side -- which can be gray, green or blue, depending on type -- should face outward. Failure to orient the drywall correctly will lead to surfaces that look rough and unfinished even when painted.
What color should the backside of drywall face?
Typically, the backside of drywall is brown. The brown side of drywall should not face out. The other side -- which can be gray, green or blue, depending on type -- should face outward.
Can you hang drywall backwards?
If you do hang drywall backwards, apply several thin coats of joint compound across the entire surface to smooth the roughness. Also hold a flat drywall knife against any seams.
Does it matter which side of drywall faces out?
Function. The brown side of drywall should not face out. The other side -- which can be gray, green or blue, depending on type -- should face outward. Failure to orient the drywall correctly will lead to surfaces that look rough and unfinished even when painted.
How do you install purple drywall?
0:599:04How To Install & Finish Drywall With Anitra Mecadon - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this project we're installing purple mold and moisture resistant drywall. Now as a rule of thumbMoreFor this project we're installing purple mold and moisture resistant drywall. Now as a rule of thumb you'll. Also need 1 5 gallon bucket of joint compound for every 500 square feet of drywall.
Which side of blue drywall faces out?
The front side offers a smooth finish and moisture protection, depending on the type of drywall chosen. The backside of the drywall is usually brown and feels a bit rough. It's essential that if you want to DIY your drywall installation, the brown side goes against the wall, and the smooth side faces out.Sep 25, 2021
Where should you use PURPLE drywall?
Purple Drywall It can be used with all wall and ceiling applications and is ideally suited where enhanced moisture and mold resistance is desired. If it is going to be in contact with water, this is the one to use.Nov 1, 2021
Is PURPLE drywall better than Green?
“Green drywall (also known as greenboard) is only moisture-resistant. PURPLE®drywall, only made by National Gypsum, is superior because it offers moisture, mold and mildew resistance. In addition, many PURPLE® drywall products offer added benefits, including resistance to scratches, scuffs, dents and sound.Mar 11, 2019
Which way should your drywall face?
The most effective method is to hang drywall so that the correct side faces outward. In other words, the side with brown paper should face the wood framing, and the light gray and beveled side should face outward.
Does the green side of drywall faces out?
The green side should face toward you when you install greenboard. The brownish side should face away. Another way to identify the correct side is to install the greenboard so the beveled edges face outward. The beveled edges run the length of the board along the top and bottom.
Does it matter which way drywall is hung?
Drywall is typically stronger when hung in the long direction than it is in the short direction, which means less chance of sagging when attached perpendicular.Jul 27, 2016
How thick is purple drywall?
Since purple drywall is usually 1/2 inch thick, 1-1/8-inch screws should perform well. As with any building or remodel project, you should first check with your local building department for applicable drywall screw size and spacing requirements.
How to score drywall along the T square?
Score the drywall along the T-square using a utility knife with a sharp blade. Change the blade frequently to maintaining a sharp blade at all times to produce cleaner cuts.
How long does it take for drywall to dry?
Allow the material to dry, usually about 24 hours. Lightly sand the joint compound with a sanding pole equipped with 80- or 120-grit drywall sandpaper. Apply another coat of joint compound using the applicable sized knife and wipe smooth. Repeat this step a third time to complete the installation.
What to wear when sanding drywall?
Wear a dust mask or respirator when sanding drywall. The fine dust can cause illness. Wear adequate eye protection when operating power tools. Check with your local building department in your area for building codes pertaining to drywall installation. This can help to avoid serious consequences down the road.
Is purple drywall the same as standard drywall?
The process for installing purple drywall is the same as standard drywall. Besides its mold and mildew resistant properties, purple drywall is also fire-resistant. Ideal applications for purple drywall are around toilets, sinks, vanities and as a tile backer board for shower ceilings or kitchen/bathroom backsplashes.
Which side of drywall should be facing outward?
In other words, the side with brown paper should face the wood framing, and the light gray and beveled side should face outward. If you use this method, the finishing process will be much easier.
What is drywall tape?
Drywall has a paper coating designed to create a uniform, smooth surface. If you hang drywall backwards, the rougher backing material will be visible through paint. Also, drywall has beveled edges that ease the process of drywall finishing. Drywall finishers embed paper drywall tape along the seams, so installing the tape within the bevel makes the taped seam rest below a flush level. Finishers then fill the beveled depression with joint compound, which hides the tape.
How does drywall tape work?
Drywall finishers embed paper drywall tape along the seams, so installing the tape within the bevel makes the taped seam rest below a flush level. Finishers then fill the beveled depression with joint compound , which hides the tape.
Why do drywall installers install boards?
Drywall installers take care to install the boards correctly to ensure that the finishing process is as easy as possible. If installers deviate from recommended practices, they might make the finisher's job more difficult. For example, hanging drywall backwards adds a significant amount of labor for the finishers.
Can drywall be installed backwards?
Times arise when a drywall installer may want to hang drywall backwards to save money. For example, if a scrap piece coincidentally fills a bare spot, some drywall installers will install it even if it must be placed backwards.
What happens if you don't orient drywall correctly?
Failure to orient the drywall correctly will lead to surfaces that look rough and unfinished even when painted. While applying several coats of primer and paint might minimize the effect of the brown paper, you will notice roughness when you shine a bright light across the surface.
What is greenboard drywall?
For example, greenboard is a type of drywall that builders use in humid areas. Its paper has a special chemical treatment that helps it repel water. Typical uses include bathrooms, laundry rooms and humid basements.
Why do you need to install drywall?
Installing drywall correctly ensures interior surfaces have a consistent, even texture. The drywall surface designed to face outward is consistent and even, so you'll achieve the best results if you install drywall according to the manufacturer's specifications.
What is drywall paper used for?
Typical uses include bathrooms, laundry rooms and humid basements. If you install this or other special types of drywall backward, the paper cannot have its intended effect because it is not facing the room. Advertisement.
Can you install drywall backwards?
If you don't mind a rough appearance, you can install drywall backward. For example, if you're installing the drywall in an unobtrusive place, such as the inside of a closet, the final result might not be important.
