Where is the EGR valve on a Ford Explorer?
P0401 Ford Explorer
- Ford Explorer P0401 Symptoms. Most of the time there are not going to be symptoms when P0401 is triggered, other than the service engine soon light itself.
- P0401 Causes: Ford Explorer. Diagnosing what is causing the P0401 code in the Explorer is typically not very tricky. ...
- Explorer P0401 Fix. ...
- Conclusion. ...
Where the Heck is the EGR valve?
Your vehicle’s EGR valve is typically located at the top of the engine and generally connects to a pipe that runs from your exhaust. If you know what you’re looking for, the EGR valve is usually very straightforward to find and get access to.
How to replace an EGR valve?
Removing the EGR Valve
- Make sure the engine is cool and disconnect the negative (black) battery terminal. ...
- Then, remove the engine cover or air cleaner duct, if necessary, to gain better access to the EGR valve. ...
- Disconnect the vacuum hose from the top of the valve by hand, depending on your model. ...
- Check the condition of each vacuum hose. ...
How to replace a throttle body in a Ford F150?
- 2015 Ford F-150 King Ranch 6 Cyl 3.5L Turbocharged
- 2015 Ford F-150 Lariat 6 Cyl 3.5L Turbocharged
- 2015 Ford F-150 Platinum 6 Cyl 3.5L Turbocharged
Where is the EGR valve located?
Answer: The purpose of the EGR valve is to recirculating engine exhaust gas to the back to the engine cylinders. To accomplish this task the EGR valve is attached to the intake manifold of the engine. This location is atop of the engine near the carburetor, usually towards the back of the engine near the firewall.
Where is the EGR valve located on a 2000 Ford f150?
0:268:34How to Replace EGR Tube V8 4.6L 97-00 Ford F-150 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt comes off of your exhaust manifold and it actually brings exhaust gases up into your intake andMoreIt comes off of your exhaust manifold and it actually brings exhaust gases up into your intake and they get burned a second time through your intake manifold when you're at highway speed.
Does f150 have a EGR valve?
The EGR valve is located in the engine compartment (underneath the hood).
How much does it cost to replace a EGR valve?
The average cost of replacing the EGR valve in your vehicle is anywhere from $250 to $350 on average, depending on your vehicle's year, make, and model as well as the type of system it has. The cost of parts will be somewhere around $190 to $270, while the cost of labor will be anywhere from $60 to $80.
How do you clean the EGR valve on a Ford F150?
2:468:14How to clean EGR Valve and Ports - YouTubeYouTubeStart of suggested clipEnd of suggested clipOur EGR port is right here. We can loosen this up. So we can gain some access to. Clean there's oneMoreOur EGR port is right here. We can loosen this up. So we can gain some access to. Clean there's one bolt right up front. And there's another in the rear.
How do you check the EGR valve on a Ford F150?
1:588:43Ford F150 Check Engine Light (Code 332) EGR Valve Troubleshooting ...YouTubeStart of suggested clipEnd of suggested clipAnd what causes the valve to move is the vacuum line right back here so clearly this is the firstMoreAnd what causes the valve to move is the vacuum line right back here so clearly this is the first place you want to check. So we have a vacuum gauge here. And we'll start up the engine.
How much is a EGR valve for a Ford F150?
The average cost for a Ford F-150 EGR valve replacement is between $198 and $254. Labor costs are estimated between $59 and $75 while parts are priced between $139 and $179. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
How do you clean a Ford EGR valve?
1:533:26Cool Trick to Clean EGR Valve in Your Car (Low Flow Code P0401)YouTubeStart of suggested clipEnd of suggested clipAnd before I put the EGR valve there's another trick get some wd-40 spray it in the hole. I'll letMoreAnd before I put the EGR valve there's another trick get some wd-40 spray it in the hole. I'll let it soak for about half an hour the penetrating oil will get on the stem.
How do you clean an EGR valve without removing it?
0:061:42How To Clean A EGR Valve With Spray Without Removing It - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe air intake pipe that comes off the air box. Simply undo it take the can and then trade it in inMoreThe air intake pipe that comes off the air box. Simply undo it take the can and then trade it in in small intervals.
Can I replace my EGR valve myself?
In most models, replacing an exhaust gas recirculation (EGR) valve is not difficult. You can do it in your garage in about an hour or two depending on your particular system, using some common tools and a good solvent like carburetor cleaner.
Is it better to clean or replace EGR valve?
Proper maintenance of the valve is a must if you want to avoid any performance related issues on your car. If you notice a smell of fuel that comes out from under the hood or rough idling, then it might be time to replace the valve. In most cases, though, you do not need to toss it out just yet.
What are the symptoms of a failing EGR valve?
What are the symptoms of a failing EGR valve?Your engine has a rough idle. ... Your car has poor performance. ... You have increased fuel consumption. ... Your car frequently stalls when idling. ... You can smell fuel. ... Your engine management light stays on. ... Your car produces more emissions. ... You hear knocking noises coming from the engine.
Park your Ford F-150
Park your truck at a level surface and make sure the hand brake is engaged.
Remove its battery cables
Now open its bonnet, lift it and use a long metal rod to keep it up so that it does not fall on your head while cleaning.
Locate the EGR Valve on Ford F-150
Now locate the exhaust gas recirculation valve that you need to clean. Exhaust gas recirculation valves can be of three types, and you can find them at different locations in your truck.
Use wrench to open its bolts
After locating the tube, use a wrench to open the bolts that are holding it firmly. Then, put the bolts and the wrench in a small box. You can see electric cables with the valve; unplug them.
Clean the EGR valve with a brush
You will need a rag and a steel brush to clean the carbon build-up. Keep on spraying and cleaning until there is no particle left.
Reinstall everything
Now it’s time to reinstall the EGR. Connect all the electric plugs with the pipe. Again, with the help of a wrench, tighten the bolts.
Dust Particles and Carbon Deposits
Deposits of carbon and dirt particles in the air start to attach to the pipe.
How to test if EGR is stalling?
One simple test to do is take the vacumm hose off the EGR and attach a hose to it, start the engine and suck, or apply vacumm to the hose. if the engine idle decreases dramatically to where it's running rough or stalling your EGR and EGR ports are fine. if it doesn't bog down or stall you most likely have clogged EGR ports.
Where is the EGR valve located?
As for your question on where it is located.. its located on the right hand side of the throttle body , has a vacumm pod attached to it and has a metal tube running to it that goes down and attaches to the drivers side exhaust manifold. Depending on the code you may have to also clean your EGR valve.
Common Symptoms Of A Bad EGR Valve
The following are the most common symptoms that a Ford (or Mercury or Lincoln) car or truck will usually experience when there's a fault in the EGR system:
What Tools Do I Need?
Below is a list of must-have tools that you'll need to successfully use the testing information in this article to solve the EGR valve system malfunction on your Ford, Mercury, or Lincoln car or truck.
Ford EGR Valve DPFE Circuit Descriptions
As already mentioned, this article covers three different styles DPFE sensors. Two are bolted onto the engine (one is plastic and the other is metal), and the other is suspended in place just by the two hoses that are attached to it. They all function in the exact same manner.
Why does my car smoke black?
This can also cause a misfire in your vehicle while driving. If your vehicle’s EGR valve is damaged, the problem can spread to other components. You might also observe black smoke coming out of the exhaust.
Why does oil vapor cause stuck valves?
Oil vapors increase the accumulation of carbon in the exhaust gas recirculation valve, which often leads to a stuck valve. Suppose the EGR valve is always open, the quantity of air drawn decreases as a result of a high proportion of exhaust gas.
How to tell if EGR valve is faulty?
Once the EGR valve in your EGR system gets faulty, the very first symptoms are reflected through the performance of your vehicle’s engine. You will start observing issues like reduction in your engine’s power and also in the effectiveness of your gasoline pedal. Another sign you might notice is an unbalanced air-fuel ratio, which will result in reduced fuel efficiency. This will force you to spend more money purchasing a large quantity of fuel or gas for your vehicle.
What is an EGR valve?
The EGR valve manages the thermal and chemical inevitabilities of your vehicle’s engine while driving. It keeps the engine operating smoothly for a long period. If you are unaware your vehicle has a faulty EGR valve, it can cause you many problems.
Why is my EGR valve misfiring?
Of course, a bad EGR valve can cause a misfire. It is mostly caused by clogged passages in your vehicle’s intake manifold. Your vehicle will also suffer from the defect, e.g., with a severe loss of power. Oil vapors increase the accumulation of carbon in the exhaust gas recirculation valve, which often leads to a stuck valve.
What happens if you have a bad EGR valve?
It will also leave unburned fuel in your exhaust, and this might cause a strong gasoline smell in your vehicle and reduce the efficiency level of your fuel or diesel. As the temperature gets to a very high point, it will finally lead to your engine knocking.
Why does my engine use more fuel?
Because of a bad EGR valve, your engine will use up more fuel or diesel than normal. There is a very high chance that there will be a release of fuel through the tailpipe of your vehicle’s exhaust system. This condition can cause your vehicle’s exhaust to produce fuel fumes.
