When approaching an uncontrolled railroad crossing the speed limit is a group of answer choices?
The speed limit at an uncontrolled railroad crossing is: 20 mph. Explanation When you are within 100 feet of an uncontrolled railroad crossing where you cannot see the tracks for 400 feet in both directions, the speed limit is 15 mph.
When approaching an uncontrolled railroad crossing you should?
Whenever you approach a railroad crossing look in both directions, listen, slow down, and be prepared to stop for approaching trains. If you cannot see for 400 feet in both directions of a railroad crossing, the speed limit is 15 miles per hour within 100 feet of it.
What is the speed limit when approaching a railroad?
15 mphThe speed limit is 15 mph within 100 feet of a railroad crossing where you cannot see the tracks for 400 feet in both directions. You may drive faster than 15 mph if the crossing is controlled by gates, a warning signal, or a flagman.
What do you do at uncontrolled railway crossing?
If your vehicle stalls on a railway crossing, get everyone out of the vehicle and away from the track immediately. If a train is coming move well away from your vehicle and away from the tracks. If possible, go in the direction where the train is approaching.
When approaching or nearing an uncontrolled intersection you should?
When approaching an uncontrolled intersection, a driver should:Maintain their speed and proceed.Stop at the intersection, check in all directions, and proceed.Yield to all other drivers.
When approaching a railroad crossing you should quizlet?
Never proceed until you are certain it is safe to do so. What should you always do when approaching a railroad crossing? When required to stop, you should do so within 50 feet, but no less than 15 feet from the nearest rail of the crossing.
When you are approaching a railroad crossing?
Explanation When you see any signs indicating a nearby railroad crossing, you should slow down, look for a train, and be ready to stop. If the red warning lights are flashing or the gate is down, you must stop 15 to 50 feet before the railroad tracks. Do not try to go around the gate.
Are approaching a railroad crossing and should prepare to stop?
Explanation When approaching an unmarked railroad crossing, slow down and be prepared to stop. Before you cross, be sure that no trains are approaching from either direction on any track. If you see or hear a train coming, stop at a safe distance from the nearest track and wait to proceed until after the train passes.
When approaching a railroad crossing that has no warning signals?
Explanation If a railroad crossing has no warning devices or only a crossbuck sign, you should slow down, look in both directions of the track, and listen for a train or railroad equipment. Only proceed with caution across the tracks when it is safe to do so.
What is an uncontrolled railroad?
uncontrolled railroad crossing. railroad crossing that does not have flashing red lights or crossing gates. gap. Distance between vehicles.
Where are uncontrolled railroad crossings found?
A control railroad crossing is identified by flashing red lights and a crossing gate. Generally, uncontrolled intersections are found in residential areas. Roundabouts increase the capacity of busy roadways. As you approach an uncontrolled intersection, you identify a pedestrian who has entered the intersection.
How are railroad crossings triggered?
The basic signal consists of flashing red lights, a crossbuck and a bell, attached to a mast. At most crossings, the signals will activate about 30 seconds before the train arrives. ... At many crossings, there will be a gate added to the signal. The gates will be fully lowered 15 to 20 seconds before the train arrives.
How far should you stop from a crosswalk?
Stop your vehicle a minimum of six feet from the crosswalk and wait for the person to cross the street. Honk your horn to lef the person know when to cross the street. Stop and then proceed through the intersection because the person is not ready to cross. You want to park downhill on a two-way road and there is no curb.
How to pass a bicyclist in a narrow traffic lane?
If you want to pass a bicyclists in a narrow traffic lane when an oncoming vehicle is approaching. Honk your horn, then pass the bicyclist. Slow down and let the vehicle pass, then pass the bicyclist. Wait until the bicyclist rides off the roadway. Slow down and let the vehicle pass, then pass the bicyclist.
How to stop a vehicle at 10 mph?
Cautiously pass the vehicle at 10 mph or less. Stop, then proceed when all pedestrians have crossed. Change lanes, look carefully, and pass the stopped vehicle. Stop, then proceed when all pedestrians have crossed. You were parked and have been waiting a long time with your turn signal on to re-enter traffic.
What does it mean to cross over a line?
Cross over the lines to pass another vehicle unless there is a "No Passing" sign posted. Cross over these lines to make a U-turn when oncoming traffic is 100 feet or closer. Cross over the lines to make a left turn from or into a private road or driveway. Your driving lane is next to a bicycle lane.
How to stop at an intersection?
Slow down and proceed through the intersection without caution. Speed up to cross the intersection before the light turns red. Stop before entering the intersection, if you can do so safely. Stop before entering the intersection, if you can do so safely.
What to do if there are two yellow lines dividing opposite lanes of traffic?
If there are two solid yellow lines dividing opposite lanes of traffic, you may: Cross over the lines to make a left turn from or into a private road or driveway. Cross over the lines to pass another vehicle unless there is a "No Passing" sign posted.
When parking your car on a hill, should you use your parking brake?
At or near the same speed as the freeway traffic. When parking your vehicle on any hill: One of your rear wheels should touch the curb. Use your parking brake and leave the vehicle in gear or "park". your front wheels should be parallel to the road if there is no curb.
