What Is The Viscosity Of Bar and Chain Oil?
- Winter – 20 weight
- Summer – 40 to 50 weight
- All Season – 30 to 40 weight
What is the best oil for a chainsaw?
Top 5 2 Stroke Oil for Chainsaw At A Glance
- Top Pick – Echo 6450002 PK6 2 Gallon Power Blend Oil
- Most Premium- Maxima 2-Stroke Synthetic Oil
- Runner Up- HP SYNTH 2-CYC OIL
- Great Value – Stihl 3 Pack Synthetic 2 Stroke Oil
- Good Quality – AMSOIL Saber Professional Synthetic 2-Stroke Oil. This Echo oil is the top pick in our list for a number of reasons. ...
What is a good substitute for bar oil?
What to look out for when looking for a substitute
- Greasiness. The correct amount of oiliness is needed to provide enough glide between the bar and the spinning chain.
- Adherent. Being slick is not the only factor of a good substitute oil. When your oil is too greasy, it will just fly off your chain.
- Viscosity. The thickness of the oil matters because when your oil is too thick, it becomes more adherent. ...
What is the best oil for an electric chain saw?
What Kind of Oil Does an Electric Chainsaw Use
- Vegetable based oils are environment-friendly. If you are aware of saving the nature, they are the great choice for you. ...
- Some oils vary their viscosity in the various temperatures. ...
- Some oils reduce the throw off of the bar and chain chances. ...
- Well-known brands of electric chainsaw make lubrication oils. ...
What can I use instead of bar and chain oil?
What are some good bar oil substitutes?
- Motor Oil. Being the most common ‘go-to’ substitute oil because of its lubricating properties, you can see why it is a popular solution.
- Vegetable Oil. You can call this nature’s motor oil. ...
- Canola Oil. ...
- Second-hand or drained motor oil. ...
- Second-hand or drained hydraulic fluids. ...
- Diesel motor oil. ...
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don't have bar and chain oil. That's because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
What can I substitute for bar and chain oil?
6 Chainsaw Bar & Chain Oil AlternativesVegetable Oil. Vegetable oil is one of the safest alternatives available to oil your chainsaw. ... Canola Oil. Similar to vegetable oil, canola oil is another super-safe alternative. ... Motor Oil. ... Hydraulic Fluid (Diluted) ... Drained Motor Oil (Diluted) ... Drained Hydraulic Fluids (Diluted)Jan 13, 2022
Can I use 5w 30 for bar oil?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
Can you use regular oil for bar and chain oil?
Whether you use bar and chain oil, traditional motor oil or a vegetable oil-based lubricant, always make sure you're using fresh oil when you fill your chain saw's bar oil reservoir. Never use waste oil that you drained from your car or boat.
What viscosity is bar oil?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.Dec 17, 2021
Can you use 10w40 in a chainsaw?
You can but it's not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn't fling off the chain as easily or poison your garden! 10w30. Thicker.
Can I use 2 stroke oil for chainsaw?
Modern two stroke chainsaws do not require generic brand oils to operate at temperatures and rpms that are comparable to those of generic brand oils. Our recommendation is to use only high quality two stroke oil designed for air cooled high performance engines when using your modern two-cycle engine.Dec 2, 2021
Can I use transmission fluid as bar oil?
It might not be as tacky as dedicated bar oils, though. I use ATF to lubricate the bar on my firewood processer. It works real well.Feb 1, 2010
What kind of oil is bar and chain oil?
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
What is special about chainsaw oil?
Bar oil is designed to stick to the chain and bar of a chainsaw. It doesn't come with a Society of Automotive Engineers (SAE) grade, also known as weight classification, similar to motor oil for your car, but instead is rated for summer or winter use.
Will a chainsaw run without bar oil?
Running a chainsaw without bar oil will cause mechanical problems, and some serious safety issues, such as: Kickback. Chain failure. Dulls the chain.
What is chain and bar oil?
Bar and chain oil was specifically developed to hold a chainsaw’s bar and chain tightly together. While it does not have an SAE grade (official weight classification), its weight is usually determined according to winter or summer user. Your chainsaw will surely suffer the negative effects if you fail to understand how much your oil can impact it.
What are the different types of oil used in chainsaws?
Some of the oil variations for chainsaws include: Vegetable oil. Motor oil.
Why do chainsaws spill oil?
Normally, chainsaws spill oil as they work and petroleum-based ones are hazardous to wildlife and trees, ultimately endangering the chainsaw operator’s health. To solve this problem, oil companies started producing vegetable oils but even these ones are damaging as well – but in a more gentle and manageable way.
Why is it important to use the right oil for a chainsaw?
This is due to its coating property that keeps debris and dirt away from the essential parts of the chainsaw and its power in strongly preventing friction that might damage the chainsaw .
Does bar oil affect chainsaw chain?
Understanding the weight of bar oil and how it effects on your chainsaw’s chain will make sure it is steady running even under the worst circumstances. Before picking a particular oil, it is usually good practice to read through your chainsaw’s user manual since most chainsaws are different and will not work well with some oil types.
Can you use bar oil on a chainsaw?
Also, most operators resort to mixing bar oils in order to prolong a full chainsaw’s lifespan. Turns out this method has been proven to be very effective in harsh weather conditions.
Do chainsaws need to be lubricated?
However, to maintain this desired qualities, a chainsaw has to be lubricated with the right oil grade. Chainsaws, being the sharp and strong machines they are can be very fragile and be largely affected by elements in the weather especially if they are not properly taken care of. Understanding the weight of bar oil and how it effects on your ...
Can you use old motor oil for chainsaw bar?
Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
What other oil can you use for chainsaw bar?
Here are four suggestions. Motor Oil. Motor oil is the most readily available alternative lube available. Vegetable Oil. Vegetable oil is also a quite affordable bar and chain oil alternative. Canola Oil. Canola oil shouldn’t be confused with vegetable oil. Drained Hydraulic Fluids.
Can you use transmission fluid for chainsaw bar?
It might not be as tacky as dedicated bar oils, though. I use ATF to lubricate the bar on my firewood processer. It works real well.
Can you use 2 stroke oil for chainsaw bar oil?
One final note: This article recommends using vegetable oil to replace chain oil in chainsaws. However, this does NOT mean replacing “mix” oil which is used for the gas mix. For mix oil, you must use the petroleum-based 2-stroke mix oil recommended by the chain saw manufacturer.
Does chainsaw bar oil go bad?
Now you’re wondering, does chainsaw chain oil go bad? Chainsaw chain oil lasts between 4-6 years when it’s stored in an unopened container or an opened container that has been tightly sealed. Bar and chain oil should be stored in a dark, dry, cool location.
Is chainsaw bar oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can I use gear oil as bar oil?
Unless you are using your chainsaw in hot conditions, gear oil is not a recommended alternative bar oil. Why? Most gear oil is at least three times more viscous than traditional motor oil and thicker than proper chainsaw lubricant.
What is the best oil for a chainsaw?
Husqvarna makes one of the most popular bar and chain oils, no matter which brand of chainsaw you own. This bar oil is the best overall option in any type of weather, thanks to a carefully blended formula with enough tackiness to prevent excessive throw-off. Recommended by nearly every reviewer, this chainsaw blade is reported to run smoothly ...
Where to use chainsaw oil?
It’s often used by people that need to operate a chainsaw around a body of water or garden, in areas where pets or kids play, or by anyone that is interested in finding an eco-friendly chainsaw bar oil.
Does Poulan Pro chainsaw oil smoke?
Unlike some other varieties of chainsaw bar oil, this formula doesn’t smoke according to users. Despite being inexpensive, this oil from Poulan Pro is often described as effective. Thanks to its high viscosity and minimal throw-off, you’ll get plenty of use out of this 1-gallon bottle of chainsaw blade oil.
Is top chainsaw oil good?
People also find that it maintains suitable viscosity even in the heat, thereby maintaining its effectiveness in reducing friction and wear on your chainsaw bar and components. This top chainsaw bar oil is a good option if you frequently tackle large or small cutting projects.
Is chainsaw oil harmful to animals?
The NV Earth Biodegradable Bar & Chain Oil is a popular choice that poses no harm to plants, animals, or people.
Does bar oil work on chainsaws?
Like other types of chainsaw bar oil, this one will keep your bar and chain lubricated to prevent dulling or damage. This means you can cut with confidence even in winter weather.
Can you use Stihl bar oil in winter?
Cold temperatures can take a toll on your equipment, and you want to make sure that your chainsaw bar oil will flow freely in winter weather. Stihl’s Winter Grade Bar and Chain Lubricant is our top recommendation for a winter chainsaw bar oil.
Why is used motor oil better for chainsaws?
Collecting the oil while it is still hot will make filtering much easier. Also, in this way, the oil will get much cleaner. Used motor oil can sling off the chainsaw faster than other oils. This is because used motor oil is already broken down. It doesn’t have the sticky additive that is commonly found in bar oil.
What is the best substitute for chainsaw bar?
And Drained Hydraulic Fluids. These three substitute is best for chainsaw bar besides Pole saw bar. Motor oil produces more smoothness on the chainsaw chains and vegetable oil provides natural thickness on the chain. On the other hand, Hydraulic fluids provide more brush and keep it lubricated.
How much does chain oil cost?
The oil gives a dry grip on the chains after drying up and works perfectly on all type of chainsaws. Lastly, a 4 liter of chain oil costs $12.99 ($3.24/liter) while a 3 liter of canola oil costs $7.99 ($2.66/liter). So, it is much cheaper.
How to keep a chainsaw clean?
Keep your chainsaw clean. Clean your chainsaw with a dry clean cloth or soak the cloth into the water and then clean it. Do not pour water directly on the chainsaw as it’s harmful to the internal machine. After oiling the chainsaw blades and bar, keep it away for a 1 hour.
Can chainsaw blades be damaged by too much oil?
Too much fast oil consuming can be harmful to the blades and bar. You’ll have to oil again if this happens. During the summer season keep the chainsaw away from direct sun rays. On the other hand, keep it in a warm place away of fire when the weather is cold. Keep your chainsaw clean.
Is motor oil flammable?
Motor oil is high Flammable. We mainly use petroleum-based motor oil for chainsaw. It needs to be refined before using on the chainsaws. However, the positive part of using petroleum-based motor oil is it gives a better grip on the chainsaw bar.
Does bar oil have sticky additives?
It doesn’t have the sticky additive that is commonly found in bar oil. This additive keeps the oil in the bar chain and groove. Having to replace oil more frequently will end up eating up any savings. As well, there is a high chance of finding more oil spatters at the time of using the chainsaw.
What does weight of bar and chain oil mean?
The weight of bar and chain oil measures it’s tackiness/viscosity, which determines how sticky and thick the oil is. For effective lubrication, a good bar and chain oil will “cling” to the metal where it’s applied. Too little weight and the oil will practically flow straight off the bar.
What is bar and chain oil?
Bar and chain oil is a lubricant used to reduce friction caused by the metal-on-metal contact between a chainsaw’s bar and chain. Bar and chain oil can be made of a petroleum or vegetable base, and is applied by filling a dedicated oiler tank.
What are the downsides of chainsaw oil?
The biggest downside of using a petroleum bar and chain oil, is the environmental pollution. By design, a chainsaw’s oiler releases lubricant onto the bar, where it is gradually carried off by the chain and flung into the environment in tiny droplets. Over time, this can send quite a bit of oil into the surrounding trees, dirt, plants, etc.
What to do if bar and chain oil is not lubricating?
Remember, it’s sole purpose is to lubricate the chain, and then to fly off after a few seconds. So, if you’re not sure your bar and chain oil is okay, simply pour some in a cup/can and have a look. If there’s no visible chunks, and it looks like a lubricant, then you’re probably good to go.
Why are bar and chain oil ratings based on seasons?
Bar and chain oil is also affected by environmental conditions, like the temperature, which is why the weight ratings are based on seasons. There are 3 weight ratings for bar and chain oil, which are summarized in the table below: Oil Rating. Typical Weight Range. Summer.
How much bar oil is released into the forest?
Over time, this can send quite a bit of oil into the surrounding trees, dirt, plants, etc. According to the United States Forest Service, thousands of gallons of bar oil are released onto forest land every year. They recommend using vegetable based bar oil whenever possible, as a result.
Is bar oil toxic?
It’s toxic – most people know that motor oil is toxic, and if you use it as a bar and chain oil it’s going to get on you, your clothes, and into the environment. It’s too runny – bar oil needs to be tackier than engine oil, which just means it is more viscous, or “sticky”.
