How to Choose Beadboard
- Decide on the height of your beadboard. Most beadboard comes in either 38-inch or 44-inch-high individual tongue-in-groove boards or sheet panels.
- Select the look of your beadboard according to the width of the flat areas between the grooves. Beading typically comes in 1 1/2- and 3-inch widths.
- Choose the desired beadboard material. ...
What size does beadboard come in?
Most beadboard comes in either 38-inch or 44-inch-high individual tongue-in-groove boards or sheet panels. Some systems contain 8-foot-high sheets you can cut down to the desired height. Select the look of your beadboard according to the width of the flat areas between the grooves. Beading typically comes in 1 1/2- and 3-inch widths.
What is the difference between shiplap and beadboard?
Tongue and Groove
- The main difference between shiplap and tongue and groove is in the profile. ...
- Shiplap is easier for DIY installation than tongue and groove. ...
- Both types of paneling come in a variety of materials. ...
- Consider climate if installing paneling on your home’s exterior. ...
- There are several interior decorating uses for both types of wood paneling. ...
Is beadboard out of style?
Beadboard paneling is the most common style of wainscoting, giving any room a classic cottage or stylish bungalow feel.So if you’re looking for a quick and budget-friendly way to give your space a fresh look, beadboard is an excellent option.
Does beadboard come in colors?
You can paint beadboard in any color you want; It used to be suitable more for a rustic and traditional interior, but now it looks excellent for modern design too; It has a unique appearance than any other types of wainscoting; It gives your interior a cottage feels; It adds texture to your interior
What is the standard size for beadboard?
The standard height of a beadboard panel is 8 feet, the same height as the average non-vaulted ceiling in a home. If you are installing beadboard as wainscot, you can cut 8-foot beadboard panels into thirds making each piece 32 inches in height.
Are there different sizes of beadboard?
Beadboard also varies in size and thickness. The common widths recommended in the past for good workmanship were 3″ and 4″ (showing 2 1/4″ and 3 1/4″ on the face). Nominal thickness ranged from 3/4″ to 5/8″ to 1/2″ and as thin as 3/8″ depending upon the manufacturer.
What thickness does beadboard come in?
Traditional beadboard paneling is made from 1/2- to 3/4-inch tongue-and-groove boards, which you can still buy. Simulated beadboard products abound, and you can find large, 1/8-inch-thick panels for a few dollars each or beefy, shop-made boards for a small fortune.
What is difference between beadboard and wainscoting?
Wainscoting: Panels on the lower one-half or one-third of a room, often in beadboard style. Beadboard: Vertically grooved panels that have a traditional style. Shiplap: Horizontal siding boards often used indoors as a design element. Tongue and Groove: A way of attaching two boards with a tongue inserted into a groove.
How wide are beadboard panels?
8″Each beadboard panel has a finish width of 8″. You can purchase prepackaged kits with 30″, 36″, 46″ and 60″ tall beadboard panels.
How much does a sheet of beadboard cost?
DPI Beadboard 4' x 8' Whitehall Wall Panel at MenardsEveryday Low Price$22.9911% Mail-In Rebate Good Through 6/12/22$2.53
How do you attach beadboard to a wall?
2:374:13How to Install Beadboard Wainscoting | Wall Ideas & Projects - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get started with the beadboard installation. Apply adhesive along the back of each panel. ThenMoreTo get started with the beadboard installation. Apply adhesive along the back of each panel. Then position it on the wall using the horizontal line as a guide nail the panel into the studs hiding.
How do you install a 4x8 sheet of beadboard?
1:3510:19DIY Beadboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd about 10 to 12 inches left over so what you want to do is make sure that the the grooves line upMoreAnd about 10 to 12 inches left over so what you want to do is make sure that the the grooves line up with each other and on the end of the sheet.
How do you cut beadboard?
0:212:16How to Cut Wainscoting : Walls & Home Repairs - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can either use a paneling blade or you can use a regular saw blade turned around backwards.MoreSo you can either use a paneling blade or you can use a regular saw blade turned around backwards. For this job I'm going to be using a battery-powered circular.
Is beadboard out of style 2021?
Our designers expect wall treatments will continue to grow in popularity, such as beadboard (wood paneling with vertical lines instead of horizontal), picture molding, and shiplap plank styles. White on white, or tone on tone, for treatments and molding is on trend right now.
Which is cheaper beadboard or wainscoting?
Wainscoting can be as cheap as $1 per square foot if using MDF or plywood, or more than $40 per square foot if using an expensive solid wood. Real wooden beadboard paneling costs $1 per square foot. Imitation types cost $0.50 to $0.75 per square foot. Wainscoting and beadboard are only as expensive as you make it.
Is beadboard still in style?
Today, beadboard is still associated with coastal New England home design but is admired and emulated across the country. Beadboard was originally made of evenly spaced, wooden tongue and groove planks that interlocked with ridges or “beads” between each one.
1. Choose a Style
For a traditional farmhouse look, try 2½-inch V-bead (far left) or 1⅝-inch V-bead (top). Wider "boards" tend to look less busy in a large space. There are also custom styles, like casual, random-width V-bead (near left).
2. Check Out The Profile
For the most convincing look and best durability, choose panels at least ¼ inch thick with deep, clean cuts and beads. Get samples before you commit.
3. Consider The Application
Beadboard panels in a bathroom should be specially formulated for moisture resistance; for porches and other outdoor areas, you'll need exterior-grade fiberboard or PVC.
4. DIY Tips
If you're starting from scratch, ½-inch panels can go right onto the framing, reducing the need to build up window and door trim to accommodate beadboard installed over drywall; ½-inch is also easier to miter—at an outside corner, say—than ¼-inch.
5. Repair It Right
MDF is about as tough as oak, but, like wood, it can scratch. Sand small blemishes, and fix larger ones with a polyester auto-body filler such as Bondo, which adheres well and sands smooth.
6. Get an Authentic Look
High-quality panels are carefully milled to create crisp profiles that mimic individual boards.
How thick is beadboard?
Beadboard was traditionally 3/4″ to 1″ thick tongue and groove boards most commonly about 4″ wide with a beaded detail in the middle of the board and at the tongue edge so that when installed they look like once cohesive structure that hides the joints of the boards.
What is beadboard used for?
Just like porch ceilings beadboard was used often in soffits both with exposed rafters like on Craftsman Bungalows or on enclosed built-up soffits on Foursquare homes and a bunch of other styles as well.
What is a rabbet on breadboard?
This rabbet allows the top rail to hold the top of the breadboard securely to the wall and hide the cut ends. Nail the top rail into the studs. The rabbet in the top rail to secure the tops of the beadboard.
What is the correct height for wainscoting?
Historically, the correct height for wainscoting is one-third the height of the room which for a typical 96″ ceiling height would be 32″. In bathrooms, that height is often extended higher to as high as 60″ like we mentioned earlier to protect the walls in a wet room.
How to install a corner board?
Start your installation at the outside corner. Cut the groove side of the two corner boards at a 45° angle. Use a little glue and get this joint tight and straight before nailing it. These first boards are the most important to set straight.
Can you blind nail 3/4 beadboard?
Moving along installing the beadboard and cutting out for electrical boxes. If you’re using 3/4″ beadboard, you can blind nail the boards into the backer boards through the tongue.
Can you flip beadboard on a smooth porch?
You may not notice it, but often the underside of your smooth porch flooring is beaded. Since beadboard had pone side beaded and the other side smooth that meant that builders could flip it upside down and install it as porch flooring.
How high should beadboard be?
1. Decide on the height of your beadboard. Most beadboard comes in either 38-inch or 44-inch-high individual tongue-in-groove boards or sheet panels. Some systems contain 8-foot-high sheets you can cut down to the desired height.
What is beadboard in decorating?
Home Decor. By Amber Kelsey. Beadboard is a decorative style of wood paneling that features evenly spaced grooves, or beads, across the surface. Often called wainscoting, beadboard may add a vintage cottage vibe to even the most contemporary spaces. Initially used in Victorian times to cover and protect the lower half of walls, ...
How long should I let beadboard sit before installing?
Once you choose your beadboard, let it sit for a few days in the room where you plan to install it. This allows the material to acclimate to the environment, and you won't have to worry about it expanding or shrinking once you've installed it. Paint or stain your beadboard before you install it.
What wood should I use for beadboard?
Use beadboard made from cedar or pine to create an informal, cozy feel. Select high-end woods such as cherry, maple and mahogany to create a more formal, professional environment. Pick beadboard made from PVC for moist areas such as bathrooms.
Is vinyl beadboard stain resistant?
Consider vinyl beadboard for high-activity rooms. Vinyl is easy to clean with soap and water. It also tends to be stain resistant and doesn't fa de. It is more expensive than other beadboard materials.
What is beadboard?
Beadboards are flat planks with one or two “beads”—semi-circular, raised ridges—milled vertically into the face of the boards. When installed on a surface, it gives the appearance of two or three narrower boards side by side. Beadboard was traditionally used on the lower area of walls (i.e., wainscoting ), but it’s since become trendy for ceilings, ...
How to make beadboard?
Here are the beadboard basics you need to know: 1 Pine is the most commonly used material in the creation of beadboard planks, which are approximately 5/16” thick, 3 ½” wide, and available in eight-foot lengths, such as these Hakwood Knotty Pine Beaded Planks (available from The Home Depot ). 2 Beadboard planks feature tongue and groove assembly, meaning one side of a plank has a tongue (protrusion) that runs the length of the plank, and the other side has a corresponding groove. When installed side-by-side this creates interlocking reinforcement that keeps the planks flat and even. 3 Pricewise, plan to spend approximately $1.50 per square foot (planks only) to cover a ceiling. Professional installation could add another $2 to $3.50 per square foot. 4 Though you may be familiar with installing tongue and groove hardwood planks on a floor, ceiling installation is more difficult, so you may wish to hire a pro. However, there’s a new (and more DIY-friendly) trend in beadboard ceiling planks—that runs $2.50 to $4.19 per square foot and is available in more than a dozen wood-tone shades—which we discuss further in the installation section.
How does Armstrong beadboard work?
Armstrong’s WoodHaven Beadboard installs with special clips that attach directly to furring strips or joists without the need to blind nail each plank. The beadboard planks then slide right into the clips, which do not show from beneath. Installing each row of planks is a simple matter of attaching the clips and then sliding the planks into place. This creates a “floating ceiling” because the planks are held in place by the clips, not directly attaching them to joists or furring strips.
What is beadboard on a ceiling?
Installing beadboard on your ceiling will transform the look of your entire setting. A ceiling is the largest visible surface in a room , its expanse broken only by a light fixture or fan. Beadboard draws the eye upward and creates visual texture.
When did beadboard start to be used?
On interior ceilings, beadboard didn’t catch on in earnest until the 1950s, when it became a way to cover up old plaster with unsightly cracks. For country homes and farmhouses, beadboard was the updating material of choice, which is why it’s still associated with rural charm.
Is beadboard still popular?
Plus, it looked great! Beadboard remained popular through the Victorian era, but its appeal waned slightly during the Roaring Twenties when glamourous wallpaper came into vogue. Beadboard never completely disappeared, however, and still today it can be found in houses built in every decade of the past century.
Can you blind nailed beadboard?
Installing standard wood beadboard planks is challenging because each plank must be blind nailed to the ceiling joists, or to furring strips (boards installed on the ceiling perpendicular to the joists).
How thick should beadboard panels be?
In this case, the feature we talk about is the thickness of the board. If you want to get better durability, the panels should at least have 1/4 inch of thickness.
What is the function of beadboard?
The function is to cap off the beadboard or in other words the moldings function as a kind of frame to keep the board together on the wall or ceiling. The installation of beadboard itself can sometimes be hard to do if you have no skill or previous experience.
What is the difference between flat panel and beadboard?
The difference between the two is noticeable. While beadboard has beads, the flat panel looks quite plain. It offers a cleaner look in any home interior.
What is beadboard paneling?
Beadboard paneling is one you can use to decorate the home interior and to bring a traditional and antique cottage style to it. Of course, these are not the only things you need to know about the panel since many other related facts are also interesting to find out. Those include: Table of Contents.
What is beadboard used for in a bathroom?
Another interesting fact that you need to know too is that beadboard also becomes an excellent choice to add decorative value to the bathroom area. Mostly, the board adds a cottage atmosphere in any bathroom interior.
What to do if you already have beadboard?
If you already have a plan to add beadboard in your home design, the next thing to do is shopping for the materials needed. In this case, you need to know about the right beadboard material that meets your need. To make everything easier, in the following are tips to shop for beadboard material that you can use.
Can you use beadboard on the ceiling?
Another thing you need to know about the use of beadboard on the ceiling is that although it is possible to use in interior, people often use it for exterior or semi-exterior areas like porch, patio, and sunroom. About this, choosing the right beadboard type is crucial.
Technical Information
For proper installation, using an appropriate PVC cement is critical especially for miter and scarf joints to help control expansion and contraction. We recommend Bond&Fill® or TrimTight Ô glue. Our complete installation manual gives you the detailed instructions you need to help with proper installation.
Warranty Details
CertainTeed stands behind our Restoration Millwork® product with a 25-year limited warranty.
Sustainability Information
CertainTeed respects the environment through the responsible development of sustainable cellular PVC trim.
