Receiving Helpdesk

how to reset lg washing machine front load

by Dr. Garrett Jacobi Published 4 years ago Updated 3 years ago

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.
May 10, 2018

Full Answer

How do you reset a front load washer?

The solution? Splurging for pedestal storage drawers for our front-load washer and dryer. Whether you're planning to buy new laundry appliances or are looking to add some lift and storage to your existing units, I can't urge you enough to go ahead and add ...

How do you reset LG washer?

Reset LG Dishwasher

  • Press the power button to switch the dishwasher OFF.
  • Turn off at the circuit breaker or power source.
  • Wait for 10 seconds.
  • Press on to start a new cycle.

How to unlock LG front loader washing machine?

  • Turn off the washer and unplug the appliance.
  • Locate the retaining tabs and/or screws that hold the top horizontal panel down.
  • Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.
  • Put the lid back down and plug the washing machine back into the electrical outlet.

Is there a reset button on my LG washer?

Where is the reset button on a LG dryer?

  • Power the dryer OFF and unplug it from the electrical outlet (You can also trip the circuit breaker if that's easier).
  • Press and hold the START/PAUSE key for 5 seconds while the unit is without power.
  • Turn the breaker back on, and power on the unit.

Is there a reset button on a LG washing machine?

Hold the power/start button down for five seconds. Then hold the play/pause button down for five seconds. Plug the machine back in and turn it on. Run an empty cycle to check if it works.

How do I reset my LG washer control board?

LE Codes Reset Procedure Sometimes the motor and the control panel don't communicate initially, resulting in this error code. To reset this issue, the manufacturer advises to unplug the machine, press the Start-Pause button, and hold it in for 5 seconds before restoring power by plugging it into the outlet.

How do you do a factory reset on a washing machine?

If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.

How do you reset a front loader?

Method 1: Unplug it The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.

What are the common problems with LG washing machines?

Washer Not Draining. A common problem with LG washers is that they will not drain because of a faulty drain pump. ... Broken Motor Wire Harness or Position Sensor Wire. ... Washer Overfilling or Leaking. ... 5 Reasons Your Washing Machine Won't Stop Filling with Water.

Why is my LG washing machine not working?

No power issues are typically caused by a tripped circuit breaker, a faulty electrical outlet, a power outage in the home, or in rare cases a unit that requires a repair.

Is there a reset button on a washing machine?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.

Can we reset washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

Why my washing machine is not working?

Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.

Why is my washing machine stuck on spin cycle?

If resetting the washer did not work, then it most likely means that your timer is malfunctioning. The washer could have gotten stuck on any cycle, unfortunately, it just got stuck on spin. Now you can disassemble the control panel of the washer to test the timer with a multimeter and replace it if necessary.

Why is my washer stuck on the rinse cycle?

If the drain control is broken or the drain is clogged, the washing water won't be able to escape and the washing machine will stall trying to start the rinse cycle. You may be able to clean and readjust your drain control components, or you may have to replace them entirely so they can start functioning again.

Why does my washer stop mid cycle?

If a washer stops mid-cycle, it could be because the pump or the motor that runs it has failed. When this happens, it cannot remove the water efficiently, pump water in, and thus the sensors won't allow it to move to the next cycle.

What does resetting a washing machine do?

LG washing machines like most other machines in recent times come with a reset button.

Resetting a washing machine

To reset the washing machine, you may need to unplug it from the electrical socket and turn the circuit breaker off. After a few minutes, plug the machine again into the power outlet once the circuit breaker is back on. Make sure that you keep a note of the error code that comes on the display in case you need the help of a service technician.

How do you do a factory reset on a washing machine?

After having checked all other options as to why your machine is not starting, you may need to do a factory reset or hard reset.

Why does my LG washing machine not start?

Sometimes, the LG washing machine won’t start because of the following problems: Power connection: Washing machines need a proper electrical outlet to get connected. They also need to have a power cord working properly.

How do I know if my washing machine needs replacing?

There are a few clear signs that your washing machine needs replacing.

Wrapping Up

The reset feature in the LG washing machine is a great way to get the machine started, if it doesn’t start the first time. Such a feature is especially helpful if you have limited access to service assistance or if you are the type to fix minor glitches in appliances.

About the Author

Neha is the one who is aware of current trends and best practices in our desi community. She also helps and educates people looking for a solution to their problems via online. Her work has been published on countless blogs and notable magazines.

How much do LG front load washer repairs cost?

Your best bet will be to call an Appliance Repair Specialist. Your LG front load washer repair will vary depending on the problem that you are having.

How do you do a factory reset on a washing machine?

There are several different models of LG washing machines that have a variety of factory reset options. We’ve provided the most common ones below for your convenience.

LG Washers with Electronic Controls

First, unplug your unit from the wall outlet. If you are unable to turn on your machine, or if it will not complete a cycle, check the following:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version632msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[09:37:39] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[09:37:39] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[09:37:39] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[09:37:39] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[09:37:39] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[09:37:39] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:37:39] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:37:39] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:37:39] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:37:39] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:37:39] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:37:39] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (9.3ms)
  • Application (622ms)
  • 1 x Application (98.48%)
    621.95ms
    1 x Booting (1.47%)
    9.30ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed607ms
    • select * from `posts` where `published_at` <= '2025-06-27 09:37:39' and `slug` = 'how-to-reset-lg-washing-machine-front-load' and `posts`.`deleted_at` is null limit 1
      1.71ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-27 09:37:39
      • 1. how-to-reset-lg-washing-machine-front-load
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 127954 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      1.98msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 127954
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      320μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      260μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      260μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      602ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 28048 limit 1
      580μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 28048
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        9AnuvhEGdFP2siuj6qb4aq2LHwSjRNTYLTT3KCjk
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-reset-lg-washing-machine-front-load" ...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-to-reset-lg-washing-machine-front-load
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=3b1b963f6793f8aa.1750997235.; _pk_ses.64.7c30=1; _pk_id.63.7c30=b5bf20921a561fe8.1750997240.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6Im5NaHFEMUtlUm9jTndZK1VlSjV0K1E9PSIsInZhbHVlIjoibDhTcDVXZmNvdnltNzF6Wm5pNUVTeTFNZzhCWk53TlQ0anlmRDUxRVJ3bTdnR094M0dkYUgxakRPSGZGMVNUOWh1MEZtejA4Vll5b2Y3dWVjd2MyWjg2bFhVOWpxdldwampQT0tGRGRHdDhwQlNNS3c1VjJFMnI1T2dWMXBPOGwiLCJtYWMiOiJhNTYyYzBjZTA1NjBhZWVlN2FlMGY2YzYwZGRhOWUxYzNlYzM0MjgyMDIwNmNjZDA2NjFiNjU4NzA1NjljYzYyIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InV6b0VMdHFxMUlmeHhTLzI5NXM1THc9PSIsInZhbHVlIjoiQlVEM0l0ZUNRdVI5SHAxblVvSWQ1ck5rRk1DamovemZ3QkxxMWVoTkFpZUpSQ0dCenRNejJOQUtNdkM3NUlrbDhsWmMrSzFrKzdweUdORFB6M1hOaWpSOVZ5Q2dKMHBZZFczNmtVdU1hemVLZFB3cnV1MlpjdTNIWVkxM1hhK0QiLCJtYWMiOiJjYWE3NTVkMjllNzAzZDBhNTVjMzZhMTM4YWJlNGU0M2NiYzkyZTA4YTdkNDczNWU0NWQzMjY5MjRiMzgyY2M4IiwidGFnIjoiIn0%3D_pk_id.64.7c30=3b1b963f6793f8aa.1750997235.; _pk_ses.64.7c30=1; _pk_id.63.7c30=b5bf20921a561fe8.1750997240.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6Im5NaHFEMUtlU" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.235" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "9562142acae71133-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.235, 172.69.59.179" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-to-reset-lg-washing-machine-front-load" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-to-reset-lg-washing-machine-front-load" "REMOTE_PORT" => "50856" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.59.179" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=3b1b963f6793f8aa.1750997235.; _pk_ses.64.7c30=1; _pk_id.63.7c30=b5bf20921a561fe8.1750997240.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6Im5NaHFEMUtlUm9jTndZK1VlSjV0K1E9PSIsInZhbHVlIjoibDhTcDVXZmNvdnltNzF6Wm5pNUVTeTFNZzhCWk53TlQ0anlmRDUxRVJ3bTdnR094M0dkYUgxakRPSGZGMVNUOWh1MEZtejA4Vll5b2Y3dWVjd2MyWjg2bFhVOWpxdldwampQT0tGRGRHdDhwQlNNS3c1VjJFMnI1T2dWMXBPOGwiLCJtYWMiOiJhNTYyYzBjZTA1NjBhZWVlN2FlMGY2YzYwZGRhOWUxYzNlYzM0MjgyMDIwNmNjZDA2NjFiNjU4NzA1NjljYzYyIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InV6b0VMdHFxMUlmeHhTLzI5NXM1THc9PSIsInZhbHVlIjoiQlVEM0l0ZUNRdVI5SHAxblVvSWQ1ck5rRk1DamovemZ3QkxxMWVoTkFpZUpSQ0dCenRNejJOQUtNdkM3NUlrbDhsWmMrSzFrKzdweUdORFB6M1hOaWpSOVZ5Q2dKMHBZZFczNmtVdU1hemVLZFB3cnV1MlpjdTNIWVkxM1hhK0QiLCJtYWMiOiJjYWE3NTVkMjllNzAzZDBhNTVjMzZhMTM4YWJlNGU0M2NiYzkyZTA4YTdkNDczNWU0NWQzMjY5MjRiMzgyY2M4IiwidGFnIjoiIn0%3D_pk_id.64.7c30=3b1b963f6793f8aa.1750997235.; _pk_ses.64.7c30=1; _pk_id.63.7c30=b5bf20921a561fe8.1750997240.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6Im5NaHFEMUtlU" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.235" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "9562142acae71133-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.235, 172.69.59.179" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1750997259.9791 "REQUEST_TIME" => 1750997259 ]
        request_cookies
        0 of 0
        array:6 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "_pk_id_63_7c30" => null "_pk_ses_63_7c30" => null "XSRF-TOKEN" => "9AnuvhEGdFP2siuj6qb4aq2LHwSjRNTYLTT3KCjk" "askhelpdesk_session" => "C3ho0zMybDwHv6LO6Qm28pl544jg9zs2Nso4V75b" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Fri, 27 Jun 2025 04:07:40 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InY1SnEwODZJNkMrZ2M1OE03c0ExNWc9PSIsInZhbHVlIjoiTkNKOUEvNXp3RkRxY2s0UGpOeUthWGhKYzR1eE1rV0tBYW95VW40Ky8xNHFLRm5CdU92d2JhejYwbG1lUjZ4czdNNXFWMFRtaThMRjU3d0xpeEZsSllac2hOL2NJOVJkUG51MHFyV0szQWVuWlVuaGMvT1pyVjh5Um1PTG1IQ3AiLCJtYWMiOiI4NzA2YWY4ZjQ0ZTAzZGFjYTFiOTYxNjRlOTU3N2QzNzZmNmI5MGUwOGZjZDI5MDY5NGEwYzMwZWM1YjBjNDJjIiwidGFnIjoiIn0%3D; expires=Fri, 27-Jun-2025 06:07:40 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6InY1SnEwODZJNkMrZ2M1OE03c0ExNWc9PSIsInZhbHVlIjoiTkNKOUEvNXp3RkRxY2s0UGpOeUthWGhKYzR1eE1rV0tBYW95VW40Ky8xNHFLRm5CdU92d2JhejYwbG1lUjZ4czdNNXFWM" 1 => "askhelpdesk_session=eyJpdiI6Ik5scGRrRVRtOFlnQnQzZ2JUU2NWRVE9PSIsInZhbHVlIjoiNjBIRWRVMGVFd3dSZ2lJUlVRMlNhVUFwSFBZend3TDduRG1MOWptb2xOT2dsNllXSTlUUXRBcWx2UDFUVFdraVpCbWJpeTlTbmpPWW91c25Qa0dIc045Q0xxajlQMzZ0c1IyMlpMR0RQRVJQbFNjdXg3emIreWJSL2NBc3gwSjciLCJtYWMiOiI0MDI5MGRhMzA2M2RiYzE4YTM4NWE1NzJiMDkyMGJlNWIzNmI5MGFlNTQ3ZTQ2ZmQ0YzNjZTBlMGQyZDVmZTI3IiwidGFnIjoiIn0%3D; expires=Fri, 27-Jun-2025 06:07:40 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6Ik5scGRrRVRtOFlnQnQzZ2JUU2NWRVE9PSIsInZhbHVlIjoiNjBIRWRVMGVFd3dSZ2lJUlVRMlNhVUFwSFBZend3TDduRG1MOWptb2xOT2dsNllXSTlUUXRBcWx2UDFUVFdr" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InY1SnEwODZJNkMrZ2M1OE03c0ExNWc9PSIsInZhbHVlIjoiTkNKOUEvNXp3RkRxY2s0UGpOeUthWGhKYzR1eE1rV0tBYW95VW40Ky8xNHFLRm5CdU92d2JhejYwbG1lUjZ4czdNNXFWMFRtaThMRjU3d0xpeEZsSllac2hOL2NJOVJkUG51MHFyV0szQWVuWlVuaGMvT1pyVjh5Um1PTG1IQ3AiLCJtYWMiOiI4NzA2YWY4ZjQ0ZTAzZGFjYTFiOTYxNjRlOTU3N2QzNzZmNmI5MGUwOGZjZDI5MDY5NGEwYzMwZWM1YjBjNDJjIiwidGFnIjoiIn0%3D; expires=Fri, 27-Jun-2025 06:07:40 GMT; path=/XSRF-TOKEN=eyJpdiI6InY1SnEwODZJNkMrZ2M1OE03c0ExNWc9PSIsInZhbHVlIjoiTkNKOUEvNXp3RkRxY2s0UGpOeUthWGhKYzR1eE1rV0tBYW95VW40Ky8xNHFLRm5CdU92d2JhejYwbG1lUjZ4czdNNXFWM" 1 => "askhelpdesk_session=eyJpdiI6Ik5scGRrRVRtOFlnQnQzZ2JUU2NWRVE9PSIsInZhbHVlIjoiNjBIRWRVMGVFd3dSZ2lJUlVRMlNhVUFwSFBZend3TDduRG1MOWptb2xOT2dsNllXSTlUUXRBcWx2UDFUVFdraVpCbWJpeTlTbmpPWW91c25Qa0dIc045Q0xxajlQMzZ0c1IyMlpMR0RQRVJQbFNjdXg3emIreWJSL2NBc3gwSjciLCJtYWMiOiI0MDI5MGRhMzA2M2RiYzE4YTM4NWE1NzJiMDkyMGJlNWIzNmI5MGFlNTQ3ZTQ2ZmQ0YzNjZTBlMGQyZDVmZTI3IiwidGFnIjoiIn0%3D; expires=Fri, 27-Jun-2025 06:07:40 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6Ik5scGRrRVRtOFlnQnQzZ2JUU2NWRVE9PSIsInZhbHVlIjoiNjBIRWRVMGVFd3dSZ2lJUlVRMlNhVUFwSFBZend3TDduRG1MOWptb2xOT2dsNllXSTlUUXRBcWx2UDFUVFdr" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "9AnuvhEGdFP2siuj6qb4aq2LHwSjRNTYLTT3KCjk" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-to-reset-lg-washing-machine-front-load" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]