Screws or fittings: 50mm screws and plastic Rawlplugs if fixing to concrete or brick, 40mm screws if fixing to wooden joists, or 65mm metal plasterboard
Drywall
Drywall is a panel made of calcium sulfate dihydrate, with or without additives, typically extruded between thick sheets of facer and backer paper, used in the construction of interior walls and ceilings. The plaster is mixed with fiber, plasticizer, foaming agent, and various additives …
How do you hide the screws on a metal shelf?
If the hanging shelf isn’t too heavy, you can hang it with finish-head screws that are easy to hide with wood putty. For heavier shelves, drill recesses for wood plugs to hide the screws. The next time you install metal shelf standards for easy-to-install shelves, remember this tip.
How do you hang a heavy shelf on a wall?
The rail strengthens the hanging shelf and lets you anchor the shelf by driving screws anywhere along the length of the rail. If the hanging shelf isn’t too heavy, you can hang it with finish-head screws that are easy to hide with wood putty. For heavier shelves, drill recesses for wood plugs to hide the screws. 9 / 11
What kind of Screws do you use to support shelves?
Fortunately, there are several different options you can use to support a shelf. The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt.
What kind of bolts do you use to hang shelves?
The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
What screws to use on shelving?
For heavy loads we'd recommend 38 mm or 50 mm screws as these have a strong fixing and don't need wall plugs. The screws should be the heaviest gauge that the holes in the bracket will take. This is usually a 4 mm gauge on small brackets and 5 mm or 5.5 mm on larger ones.
Can you hang shelves with screws?
Hang the Shelves If the bracket has openings along the top, secure it to the bottom of the shelf by inserting screws into the holes and drilling until they are secure. This will prevent it from sliding or toppling over.
What screws to use to hang shelf on drywall?
The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you're working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
How long should my screws be for shelves?
The screw should go into a WOOD stud a minimum of 3/4” to develop “full strength “. Add 1/2” for gypsum board wallboard (probably) plus the thickness of the backing on the bookcase... probably 1/4”. So, I'd use a screw about 1 1/2” long (#8 screw, but check the length because they come in various lengths.)
How do you screw a shelf to the wall?
3:144:57How to Put Up a Shelf with Wickes - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen mark the length of your wall plugs on your drill bit using tape put goggles on and drill holesMoreThen mark the length of your wall plugs on your drill bit using tape put goggles on and drill holes in the wall where your marks are for masonry walls it may help to switch the drill into hammer mode.
Will drywall anchors hold a shelf?
Wall anchors, also called molly plugs, will help you build a sturdy foundation for your shelf. Regular hollow wall anchors are fine for plaster; for drywall you will need butterfly or toggle anchors. Before deciding which anchors to buy, consider what you want your shelves to hold.
What is the difference between wood screws and drywall screws?
Drywall screws are hardened so that the Phillips slots won't strip out under the stress from high-speed screw guns. Wood screws are thicker and made of softer metal, making them more snap-resistant. Different thread patterns make the screws work slightly differently too.
How long should screws be?
The most important factor in screw selection is length. The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw's diameter, or gauge. Screws come in gauges 2 through 16.
How long should screws be in a stud?
The ideal depth a screw should go into a stud is 3/4 of the length of the screw's bottom part. Experts say that half of the length is alright. You'll have to consider any material between the screw and the stud.
How much weight can a screw hold?
In general, a screw can hold 80-100 pounds. Several factors can impact on the amount of weight the screw can hold. This includes the length of the screw, the type of thread, the quality of the screw, the way it was inserted, and the type of forces that will be acting on it.
How much weight can screws in a stud hold?
A screw in a stud can hold between 80 and 100 pounds. Be sure to distribute the weight across as many as you can. The easiest way to increase the amount of weight a screw in a stud can hold is to simply double up. If you have room for a second or a third screw, just add more.
Can a screw be too long for a stud?
1:075:22Don't Use Screws That Are TOO LONG or TOO SHORT ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd another inch and a quarter of threads in the wall stud. The point may still get close to a badlyMoreAnd another inch and a quarter of threads in the wall stud. The point may still get close to a badly placed wire in the wall. So you can scale down to a two and a quarter inch screw.
How do I hang a shelf on a wall?
Remember that the top of the shelf will be above your marks. Adjust the level until the bubble is centered, and mark the keyhole locations on the wall. Then install anchors or drive the screws into the studs and hang the shelf.
How do I hang a closet shelf?
Here’s a fast, strong and easy way to hang closet shelves. Paint a 1×4 to match your shelf. Then draw a level line and locate the studs — use the masking tape trick we showed you earlier. Nail the 1×4 to the studs with 8d finish nails. Run the strip across the back and ends of the closet. Then put blocks in the locations where you want brackets. Now you have solid wood to attach the shelf mounting brackets and the closet pole sockets to. And the back of the shelf is fully supported to prevent sagging. Learn about 21 cheap closet updates here.
What is the keyhole on a shelf?
The key to keyholes. Keyhole slots on the back of shelves are a common way to hang shelves or shelf mounting brackets on hidden screws, but you have to get the screws perfectly aligned or you’ll have all kinds of trouble.
How to make cleats for garage?
Make cleats by ripping strips of 3/4-in. plywood with a 45-degree bevel on one edge. Screw one strip to the wall and the other to the back of the shelf or cabinet. Learn how to turn your garage into a storage dream with french cleats. Originally Published: March 20, 2020.
Can you fasten a shelf to studs?
Of course it’s always best to fasten heavy shelves to studs, but if you can’t, there’s an anchor that’s almost as good. If you’ve used standard toggle bolts, you know they hold well. But they’re a hassle to work with, and they leave an oversized hole that may show. And if you ever need to take the shelf down to paint, the toggle falls into the wall and you have to repeat the whole tedious process when you reinstall the shelf.
Can you screw a shelf to a toggle?
After installing the toggle according to the instructions, you’ll have a threaded opening in the wall ready to receive the included bolt. You can simply screw the shelf to the captured toggle. And you can remove the bolt and the toggle will stay put, ready for you to reinstall the shelf.
Can you use hollow wall anchors on shelves?
Most of the hollow-wall anchors included with shelves or shelf brackets aren’t worth using. If you can’t attach your shelf to studs and must use hollow-wall anchors, make sure to choose one that will support your shelf in the long run.
M8KWR New Member
If i know I am going into a solid wall which has been plastered can I use the torx/easydrive masonry screws?
Dr Bodgit Super Member
The screw is taking a shear force so almost any half decent screw should do, as long as you're using a few. I'd typically use something like a 2" No .10 which I think is 5mm x 50mm with rawlplugs.
KIAB Super Member
The screw is taking a shear force so almost any half decent screw should do, as long as you're using a few. I'd typically use something like a 2" No .10 which I think is 5mm x 50mm with rawlplugs.
Dr Bodgit Super Member
Yep you want at least a rawl plugs depth of the screw going in the wall and slotted upright brackets are quite deep.
M8KWR New Member
Just to clarify, can I use them without raw plugs? I was just think of ease not needing a raw plug!
Dr Bodgit Super Member
Yes, no need for rawlplugs with those screws, but they are somewhat overkill IMO.
KIAB Super Member
Yes you can use masonry screws in dense concrete blocks,with not wall plug, wouldn't use them in aerated blocks though.
How to make floating shelves?
1. Build your own floating shelves so that they’re hollow. There are a couple of ways to do this, but the easiest way is to use plywood and nails to create a hollow shelf. You would ultimately have 5 sides, with the back of the shelf being open.
How to install figure 8s in a shelf?
You should use at least 2 figure-eights for the best stability, and make sure to spread them evenly using a ruler. Use a pen or pencil to mark where the holes will go.
How to make a shelf even and steady?
To make sure your shelf is even and steady, use a level and the stud finder to decide where to place the other bracket that will hold up your shelf. Use a pencil to mark where the second bracket will go. Make sure the distance between the 2 brackets isn't longer than the length of your shelf. ...
How to make a special bracket?
To create the first hole for your special bracket, use a 0.25 inches (0.64 cm) drill bit to get started. Once you’ve created a small hole, switch to a 0.5 inches (1.3 cm) bit and drill a hole for the bracket, making sure not to drill too deep.
Can you use brackets on floating shelves?
You can choose to use brackets specifically designed for floating shelves, making them invisible to the eye. You can also build your own hollow shelf and then slide it right on to a wooden cleat. Lastly, there's the option of using figure-eight fasteners to hold your shelf up on the wall. Steps.