- Width of garage door opening – Standard widths are 8’, 9’-10’-12’-14’-16’-17’ and 18’
- Height of the garage door opening- Standard residential heights are 7’-7’6’’-8’
- Header- the header is ideally a minimum 12’ wide micro-laminated beam that spans the width of the garage door opening.
How to measure your garage door opening?
Tips for Multiple Garage Door Measurements
- Measure each door individually. Even if you believe they are all the same size, there may be small differences.
- If you have a two-door or three-door garage, the side room between two doors should be at least 10 inches wide to accommodate side tracks for both doors.
- Measure the backroom for each individual door as well. ...
What are the standard sizes for a garage door?
The typical sizes for single garage doors are 8’ x 7’, 9’ x 7’ and 10’ x 7’. These are the most standard garage door sizes, and they are a perfect fit for standard homes. This size is good for one car, small truck or a van. It’s a great choice if you don’t plan to store a lot of items in your garage or switch to a bigger vehicle.
How high is a standard garage door?
Unless you have an extended garage for long vehicles, one size usually fits all, when it comes to garage depth. In all cases, the garage door height is a standard 7 or 8 feet, and the ceilings are usually between 8′ and 10′ off your garage floor. Why Are Garages So Much Wider Than Cars?
What is considered a standard garage door?
What Are the Standard Garage Door Sizes?
- Single Standard Sizes. One car, one door, just the right size. ...
- Double Standard Sizes. For homes that have multiple cars or larger SUVs or trucks, a double garage is ideal. ...
- RV Garage Door Standards. Recreational vehicles loom taller than the average SUV and, as such, need extra height built into the garage and the garage door.
- Go Big Commercial Standards. ...
What is the rough opening for a garage door?
The rough opening's width should be three inches longer than the door, measured between the left and right edges. So, in a 12-foot wide garage door, the rough opening will be 15 inches wide.
What is the rough opening size for a 9x7 garage door?
When measuring garage doors the width is always given first followed by the height. So 9×7 implies a door that is 9ft wide and 7ft tall. Some builders frame the garage door rough opening width down to 8'10” or 8'11” for a 9ft wide door so that the metal door end stiles rest up against the door jambs.
How much room do you need for a garage door to open?
Without proper spacing, a garage door just won't work. Most standard automatic openers require at least 12 inches of overhead clearance, some taking 18 inches. This includes about 12 inches for the door and torsion springs and three inches for the garage door opener. Some wood garage doors might require 18″ headroom.
How do you size a garage door opening?
You'll want to make sure you take the measurement at the door's widest point, in feet and inches. Next, measure the height of the door. You'll also take this measurement at the door's highest point, from floor to the top of the finished opening.
What is the rough opening for a 9 foot garage door?
9'3″ wideFrame the rough opening to 3 inches wider than the garage door you have selected. If you are installing a 9′ wide garage door, the opening will be 9'3″ wide. Once finished, the opening will be 9′ wide. The finished opening should be the same width and height as the garage door you have purchased.
How do you frame a 9x7 garage door opening?
0:161:59How to Frame a Garage Door Opening - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can frame the opening in two by fours on the side they need to extend above the header as. WellMoreYou can frame the opening in two by fours on the side they need to extend above the header as. Well as 204 across the header. And then in the center.
How much space do you need on either side of a garage door?
Again, start your measurements outside of the door jamb and measure to the wall. This measurement is necessary to ensure that there is enough room for the vertical portion of your garage door track. In most cases, you'll need 3.5 – 4 inches of space on either side.
How big is the rough opening for a door?
Framing rough opening sizes are really quite simple. Just add 2″ to the width of the actual door size. You should add 2-1/2″ to the height of the actual door.
Can a garage door be wider than the opening?
A garage door should not be much wider than the opening. The garage door should be the same width as the opening or very slightly smaller, with the rough opening being a few inches wider to accommodate the door's frame.
What's the rough opening on a 36 inch door?
Standard Sizes A 36” x 80” pre-hung single door will use a rough opening of approximately 38-1/2” x 82-1/4” to fit. Always remember to square up your door before you nail the frame in place to assure it will close properly.
What to consider before buying your new garage door
How are you choosing the size of your door? Are you calculating it based on the existing garage or are you building a new one?
How many vehicles do you plan to park in your garage? How big are they?
If you know what the garage will be used for, it will give you a good idea of the door size you need. For example, will your garage be used to park a car? Two cars? A motorcycle or an RV?
Consider adding a garage door opener to your garage
The larger and heavier the door, the harder it will be to lift if the garage door system isn’t properly balanced. Why not make your job easier by calling a specialist to do a little maintenance on your door and install an electric door opener?
The garage door layout
Most of our doors are cut to the nearest inch to accommodate your door space as much as possible. Weatherstripping will fill the remaining space, providing you with a properly installed door that won’t leave any gaps.
The garage door style
Not only do you want a functional door, but you also want that door to look good. As a garage door generally represents ⅓ of the front of your house, you must be able to display this door proudly.
How big can a garage door be?
Garage doors, being plural, can be twice the size of a single garage door plus about three feet of space between the vehicles parked in the garage . Alternatively, with proper structural support between them, two identical doors can be hung side by side.
How much space does a double garage door need?
Double sized garage doors can be twice the size of a single garage door plus about three feet of space between the vehicles parked in the garage. Such doors can be convenient as opening for a large space, but consideration is the door is much heavier and is going to require a more powerful garage door opener motor, and is going to need heavier springs and pulleys as part of the opening system.
What is a track option garage door?
Modern garage doors raise upward and fold across the garage ceiling. Traditional barn and utility building garage door designs opened sideways as sliding doors. Track option doors provide such a classic design style with a functioning garage door built to modern expectations for practical use. They can generally be the appropriate size as expected for a single car, two-car, or larger garage.
How do I clean a garage floor that has been painted?
This includes refrigerators, heavy machinery, lawn equipment, bicycles, toolboxes, etc. Step Two: If your garage floor is already painted, you have to sand it down using a power sander for faster and easier results. Step Three: Thoroughly sweep and wash the floor with floor cleaner and then completely rinse.
How wide should a garage door be?
For single door garages with dimensions of around 12 by 22 feet, the most standard garage door's width should be 8 or9 feet. The height of a garage usually is 7 to 8 feet.
How big is a commercial overhead garage door?
The standard dimensions for overhead garage doors are 32 by 24 feet.
How high should a garage door be for an 8x14 shed?
The best garage door dimensions for an 8 by 14 feet shed should be a width of 6 feet by a height of 6'6 feet. However, if you have more oversized vehicles such as RVs, it would require you to install garages with more significant heights, 12 feet.
What is the headroom of a garage door?
Measure the headroom. The headroom refers to the space between the top of your garage door and your garage's roof or ceiling. The space between these two points is crucial since it'll be used to accommodate the opening mechanisms.
Why do you need a double garage door?
A double garage door makes it easier for you to park your truck than two single garage doors. If you have a full-sized SUV, for instance, then it's generally more advisable for you to install a two-door garage making it easier for you to drive in and out of your garage.
How tall is a double door garage?
Double Door Garage. For double door garages, the garage doors' most standard width is 16 feet, whereas the height is seven or eight feet. However, as with single-door garages, the height can be extended to allow room for RVs for up to 10 feet.
What is commercial garage door?
Commercial garage doors should be versatile, functional, and practical. They should facilitate easy entry and exits for trucks and safe loading and offloading. It would be best to consider your garage's size and style to get the right dimensions that suit your needs.
What size garage door should I use for a car?
If you use a normal sized vehicle, you can usually find garage doors in the size ranges of 8 by 7 feet, 9 by 7 feet or 10 by 7 feet. The difference in width is to compensate for cars that may be slightly wider.
How big is an RV garage door?
For example, the RV single garage door measures 16 by 8 feet, to accommodate the extra width of the RV and all other attachables. Even though most manufacturers tend to stick with these garage door sizes, some manufacturers use slightly different measurements. So before buying it’s always better to confirm both the door opening of your garage, ...
How far can a car pass through a garage door?
If your car’s close to the 7 feet range , it may be able to pass through, but you’ll have to be super careful every single time. Unless your car has wider than average mirrors, many vehicles have lost their side mirrors to too narrow garage doors. Of course there are single garage doors for much bigger vehicles as well.
Why don't people know what garage door is opening?
Some people may not have knowledge of their garage door opening for obvious reasons – they didn’t build the house themselves or the real estate agent didn’t pass down that knowledge along with the keys to the house. You’ll need to take this measurement yourself.
Is it worth it to have a garage door?
It’ll cost you a premium, but it’ll be worth it if you’re really into cars.
Does Metro Garage Door have a Super Service Award?
No other Garage Door company in the area has been awarded the Super Service Award every single year running. Hundreds of satisfied homeowners and commercial property owners just like you continue to recognize Metro’s exemplary services, via positive reviews, earning Metro the Angie’s List Super Service Award for 16 years.
How big is a standard garage door?
These “standard models are readily available in 8 by 7 feet, 9 by 7 feet, and 10 by 7 feet, with the biggest variant coming in the width of the garage space. If a homeowner should require a door with an increased height, 8 feet doors are typically readily available as well.
How wide is a single garage door?
For the single garage doors, the size typically ranges between 8 feet and10 feet wide. Height-wise, expect a measurement between 7 feet to 8 feet.
How big is a garage door for a motorhome?
In general, The largest RVs are 10-feet height-wise and vary in length from 20-40 feet or more in length. When calculating a size, expect a garage ...
How thick should a garage door be?
The most insulated doors, ones ideal for garage workshops or converted living spaces, can have insulation ranging in thickness from ¼ inch to 1½ inches. When choosing your garage door insulation needs, and thus materials and cost, consider your individual needs first and foremost.
How tall is a boat in a garage?
Modest boats, such as water sport or shallow fishing vessels can be parked in your garage, meaning no need for a dock! These boats (ones that can be trailered to and from the home) are generally 10-feet or more in height, 8-feet or more in width and have a length of over 25-feet. Adding a foot to two feet around the perimeter of the boat for hitching and maneuvering around the garage, you will only need a slightly extended garage.
How wide is a garage for two cars?
If one garage is selected to house two cars, the size will need to be between 12 and 18 feet wide with a similar height to the single, or typical sized garage at 7 feet.
What size door should I use for a utility truck?
If you have a taller vehicle that requires a higher clearance, such as utility trucks, cargo vans, heavy-duty trucks, or vehicles with storage or utility racks on top, a 10’ door is ideal.
What Is The Standard Size Garage Door?
Standard garage doors are designed for single-vehicle garages, such as standard-size cars, SUVs, trucks, and vans. The dimensions of a standard garage door are 7 feet high and 8 to 10 feet wide. In newer constructions, garage doors can measure 7 feet tall and 9 feet wide.
Double Standard Garage Door Dimensions
Double standard garage door sizes are similar to standard garage doors in height but have wider dimensions. Dimensions of double standard garage doors are 7 to 8 feet high and 12 to 16 feet wide. This door size is ideal for two-car garages or if you use the garage as a workshop or recreational space.
RV Garage Door Dimensions
If you are designing a garage with your RV in mind, then oversized garage doors are what you need. RV or oversized garage door dimensions are 12 feet high and 10 to 14 feet wide. Some pop-up campers can fit in a standard one-car garage, but larger RVs will need their own garage.
Combination Garage Doors
Combination garage doors are either multiple single doors or a single and a double garage door. This style offers flexibility and more space; however, combination garage doors require more maintenance. Combination garage doors will require at least two garage door systems and openers.
What Are The Six Types Of Garage Doors?
Now that you have the size of the garage door figured out, what style to choose? The six types of garage doors are sectionals, roll-up, slide-to-side, side-hinged, canopy, and retractable. Let’s take a look at each to find the right one for you.
What Is The Best Way To Measure For A Garage Door?
Measuring for a garage door is simple, and you can do it in a few steps.
How To Frame A Garage Door?
If you’ve decided to install the garage door yourself, the first thing you will need to do is frame the opening. Below we’ll explain the supplies, measurements to take, and the process of framing a garage door.
How to Measure a Garage Door
Measuring a residential garage door is more than determining the dimensions of the door. Make sure the garage can accommodate a garage door opener with the door in both open and closed positions.
What Are the Standard Garage Door Sizes?
Single garage doors can be small enough for golf carts or large enough for tractors. It all depends on your home or community.
What Are the Standard Double Garage Door Sizes?
Many homeowners have two cars and need garage space to shelter them both. The standard size for double garage doors is 16 feet wide and 7 to 8 feet high.
Custom Garage Doors
Custom garage doors can offer a door height of 10 feet or more. This higher height can accommodate large vehicles such as trucks, recreational vehicles or vehicles with tall roof racks. They can also be made to fit garages of unusual dimensions where standard garage door sizes don't work.
Standard Garage Door Thickness
The thickness of residential garage doors can determine how well it is insulated. Not all garages need insulation, so weigh price against how you plan to use your garage.
How wide should a garage door header be?
Headers should be a minimum of 12’ wide . Doubled 2×4’s, at minimum, should be at each edge of the garage door to allow for the mounting of the tracks and jamb brackets.
How wide should a header be?
Header requirement #2- At minimum the header should be 12’ wide with doubled 2×4 at opening and ceiling running the width of the door with a 2×4 in the center of the opening for the center bracket to attach to. Headers should be a minimum of 12’ wide.
