Receiving Helpdesk

how do i adjust the springs on my attic stairs

by Pierce McGlynn Published 3 years ago Updated 3 years ago

How to Adjust the Springs on Attic Stairs.

  • 1. Pull down the stairs. Switch on the attic light or carry a flashlight into the attic. Ask an assistant to raise and close the stairs.
  • 2. Locate the adjustment nuts on the threaded stems of the J-hooks that connect the inner end of each spring to the corresponding power arms, ...
  • 3. Loosen each locking-nut that secures the adjustment nuts on each threaded stem with an open-end wrench, says William Wixon. Rotate the adjustment ...
  • 4. Ask the assistant to pull down the door and raise it closed again. Rotate the adjuster nuts, as necessary to eliminate a gap. Tighten the locking ...

Tip. Some stairs have turnbuckles instead of lock nuts and adjustment nuts. Insert the tip of a screwdriver into a turnbuckle and rotate it clockwise to increase the tension on a spring.

Full Answer

How do you replace the springs on attic stairs?

If you are replacing the attic stairs, unscrew the springs. Do this by removing the screws from the ladder side first and then folding the spring back so that it is level and not about to snap down. Then, unscrew the spring on the attic floor joist.

How do you adjust the tension on a stair spring?

Rotate the adjuster nuts, as necessary to eliminate a gap. Tighten the locking nuts against the outer edges of the corresponding adjustment nuts. Some stairs have turnbuckles instead of lock nuts and adjustment nuts. Insert the tip of a screwdriver into a turnbuckle and rotate it clockwise to increase the tension on a spring.

How do you adjust J hooks on attic stairs?

Switch on the attic light or carry a flashlight into the attic. Ask an assistant to raise and close the stairs. Locate the adjustment nuts on the threaded stems of the J-hooks that connect the inner end of each spring to the corresponding power arms.

How do you attach a spring to an attic door?

Measure where the spring will need to be fixed to the opening. The spring should be fully extended and reach down such that you can fold and unfold the ladder. Next, mark on the attic door opening where the spring should go. It will usually attach to a piece of the floor just above the opening.

How do I fix the springs on my attic stairs?

How to Replace the Springs on Pull Down Attic StairsPull down the stairs and switch on the attic light. ... Replace the springs one at a time. ... Rotate the turnbuckle counterclockwise by hand to relax the tension on each spring. ... Connect the end of a new springs at the studs.More items...

How do I tighten my attic ladder?

0:321:54You just replace the whole unit. And they come in standard sizes just get the measurement. And thenMoreYou just replace the whole unit. And they come in standard sizes just get the measurement. And then it's time to have the whole thing replaced don't try to fix it if it ever collapses.

Why won't my attic door close all the way?

It could be the door itself is rubbing the opening. It could be the arms or the springs touching the door. It doesn't take much to keep a cheap attic door from staying all the way shut, but once you get everything straight, the arms not bent, the opening aligned properly with the door, then it should stay shut.

How do you close a pull down attic ladder?

0:172:21Until it is resting firmly on the ground your ladder needs to be fully closed and fully resting onMoreUntil it is resting firmly on the ground your ladder needs to be fully closed and fully resting on the floor for it to be safe and operational.

How do you reinforce attic stairs?

1:084:09So we're gonna fix it with one of my favorite pieces of hardware it's called a tea nut. As prongsMoreSo we're gonna fix it with one of my favorite pieces of hardware it's called a tea nut. As prongs which will bite into the wood and prevent it from turning.

How do you secure an attic hatch?

1:173:50You want to seal the edges. Because you have to cut it to size. And then you're gonna also want toMoreYou want to seal the edges. Because you have to cut it to size. And then you're gonna also want to put a sealer on the edge to where it's gonna actually push into that space.

How do you replace an attic door?

0:139:45Go to the costume box today we're going to cover an attic stairway. I'm going to take the stairwayMoreGo to the costume box today we're going to cover an attic stairway. I'm going to take the stairway out and we're going to put a new one. In Mike's gonna set the ladder up in place. I'm gonna stabilize

How do you put springs on an attic door?

1:332:48And you put this spring there and then this is a little level that you can use and expand it downMoreAnd you put this spring there and then this is a little level that you can use and expand it down right here. Very easy expand it right here. And you put a little boat right there and the job is done.

How does attic ladder work?

An attic ladder is a retractable stairway that pulls down from the ceiling to provide access to attic space, then folds up into a ceiling frame out of the way when it is not needed. An attic ladder makes every trip up and down from the attic easier, faster, and safer.

How to relax springs in attic?

Climb up into the attic. The springs are most relaxed when the attic ladder is in the stowed position.

How to relax tension on springs?

Rotate the turnbuckle counterclockwise by hand to relax the tension on each spring.

Where are the adjustment nuts on a J-hook?

Locate the adjustment nuts on the threaded stems of the J-hooks that connect the inner end of each spring to the corresponding power arms.

How to relax springs in attic?

Climb up into the attic. The springs are most relaxed when the attic ladder is in the stowed position.

How to fix a loose spring on a ladder?

If a spring has come loose at one end, climb the stairs, enter the attic and have an assistant close the stairs. Put on heavy duty gloves. Grab the loose end of the spring with a pair of pliers.

How to Adjust Attic Ladder Springs

An attic ladder will deteriorate with usage and as it ages it might cause safety issues. Springs may get damaged, worn, broken, loose, or rusted causing the whole assembly to weaken. Therefore you should regularly inspect these components to ensure that they are performing well.

How to Fix Ladder Hinge

A pull-down step enables you to access the roof crawl space or attic. However, you can’t do that when its hinges are loose, stiff or squeak. A repair restores them to normal working order thus making it easier to use the stairs.

How to Fix Attic Ladder Arm

You can have a faulty attic ladder without knowing because it looks nice as long as you’re not using it regularly. However, this will come to light when it’s time to collect an item in your attic storage.

Conclusion

An attic can be used as a storage area or an extra room. You can access this space using a ladder or stairs. However, you must regularly maintain this equipment to avoid injures when a family member climb up when it’s compromised.

What do springs do in an attic?

Pliers. Attic door springs help secure the ladder in the attic and prevent it from swinging too far out when it has been opened. The springs keep the ladder firmly connected to the attic door.

Where should the spring be on a ladder?

The spring should be fully extended and reach down such that you can fold and unfold the ladder. Next, mark on the attic door opening where the spring should go. It will usually attach to a piece of the floor just above the opening. Mark on the ladder where the other end should be fixed.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version415msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[03:18:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[03:18:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[03:18:53] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[03:18:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[03:18:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[03:18:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:18:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:18:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:18:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:18:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:18:53] LOG.warning: explode(): Passing null to parameter #2 ($string) of type string is deprecat...
  • Booting (30.74ms)
  • Application (384ms)
  • 1 x Application (92.42%)
    383.56ms
    1 x Booting (7.41%)
    30.74ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed339ms
    • select * from `posts` where `published_at` <= '2025-07-04 03:18:53' and `slug` = 'how-do-i-adjust-the-springs-on-my-attic-stairs' and `posts`.`deleted_at` is null limit 1
      3.08ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-07-04 03:18:53
      • 1. how-do-i-adjust-the-springs-on-my-attic-stairs
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 171738 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      9.28msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 171738
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      2.03ms/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      740μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      1.37ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      321ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 37167 limit 1
      890μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 37167
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        Yxc9BAPUedy1gjF8MQE9GTG5TNDkplE83Q9qOKkG
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-adjust-the-springs-on-my-attic-stai...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-i-adjust-the-springs-on-my-attic-stairs
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=407189e69ec6afa1.1751579322.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6ImtlRnZkaWpES21GTTltbVI3OEsxa0E9PSIsInZhbHVlIjoiemRpU2M4Tm4zOSt4WkRCWndnRVdZNW54dUFYYTNuelFIWHpUMkJDclFXdGxnaThXM09LaTdWOTVwMnY5K2N3WTlnR1dWRTExbWh5K0hEVld5MFhBbjJJY3RGZ0oxaDVFbGRJVFBJTzNMZCt1NnBMTGpGUlphL0xOUFFGbVMxMnMiLCJtYWMiOiI3M2FlZTc3NjZkNTVmNTBlZjM1YWNjZjkyYTJhMTdjYmVjMWFiYjFmODFlYTlmZTBiODE4ZmNhODMwNWY3ZjMxIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InlUUkZmSlpqRXR5WmN0RFpITjd6b1E9PSIsInZhbHVlIjoiTFNqeklVcVVHc25XczhGeVVXVDZQOFJLVGhvcUJZeGZ3dWlsL0dqdVF6QjNOUkc4Zk1nRW41NlA3Yk53NTYyaHBnSDBoK0dNaWhJZVVUcVM1MlpjRFRWY1Zvc1N3aGlTYmM2ajhBSWYwbzNmRTR5K25LRzNvUEJqdTU5a25QQ0EiLCJtYWMiOiIyNzhmNDNkNzllYjUzNzk1YjBkNTlhYzk1ZjY4ZmRjMDc4OWY4NzkyNTljYzRmMzc5OGE1MWZlNmNkODRmNjExIiwidGFnIjoiIn0%3D_pk_id.64.7c30=407189e69ec6afa1.1751579322.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6ImtlRnZkaWpES21GTTltbVI3OEsxa0E9PSIsInZhbHVlIjoiemRpU2M4Tm4zOSt4WkRCWndnRVdZN" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.122" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "959996f40ad5aad0-YYZ" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.122, 172.70.80.222" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-i-adjust-the-springs-on-my-attic-stairs" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-i-adjust-the-springs-on-my-attic-stairs" "REMOTE_PORT" => "53468" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.80.222" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=407189e69ec6afa1.1751579322.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6ImtlRnZkaWpES21GTTltbVI3OEsxa0E9PSIsInZhbHVlIjoiemRpU2M4Tm4zOSt4WkRCWndnRVdZNW54dUFYYTNuelFIWHpUMkJDclFXdGxnaThXM09LaTdWOTVwMnY5K2N3WTlnR1dWRTExbWh5K0hEVld5MFhBbjJJY3RGZ0oxaDVFbGRJVFBJTzNMZCt1NnBMTGpGUlphL0xOUFFGbVMxMnMiLCJtYWMiOiI3M2FlZTc3NjZkNTVmNTBlZjM1YWNjZjkyYTJhMTdjYmVjMWFiYjFmODFlYTlmZTBiODE4ZmNhODMwNWY3ZjMxIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InlUUkZmSlpqRXR5WmN0RFpITjd6b1E9PSIsInZhbHVlIjoiTFNqeklVcVVHc25XczhGeVVXVDZQOFJLVGhvcUJZeGZ3dWlsL0dqdVF6QjNOUkc4Zk1nRW41NlA3Yk53NTYyaHBnSDBoK0dNaWhJZVVUcVM1MlpjRFRWY1Zvc1N3aGlTYmM2ajhBSWYwbzNmRTR5K25LRzNvUEJqdTU5a25QQ0EiLCJtYWMiOiIyNzhmNDNkNzllYjUzNzk1YjBkNTlhYzk1ZjY4ZmRjMDc4OWY4NzkyNTljYzRmMzc5OGE1MWZlNmNkODRmNjExIiwidGFnIjoiIn0%3D_pk_id.64.7c30=407189e69ec6afa1.1751579322.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6ImtlRnZkaWpES21GTTltbVI3OEsxa0E9PSIsInZhbHVlIjoiemRpU2M4Tm4zOSt4WkRCWndnRVdZN" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.122" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "959996f40ad5aad0-YYZ" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.122, 172.70.80.222" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1751579333.7795 "REQUEST_TIME" => 1751579333 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "Yxc9BAPUedy1gjF8MQE9GTG5TNDkplE83Q9qOKkG" "askhelpdesk_session" => "ChL4KkQJSh4jTkXKZWBrUR2wArPES8INEYxkYY8Z" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Thu, 03 Jul 2025 21:48:53 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlF0QkpVZHpMNTNOeFpWbk85bDkwSFE9PSIsInZhbHVlIjoiaHdWVGJHR3lsUkd4SEZzWUpPL3F2Mk1RUHV2bGJHN1lCNkNwS2p3ejZSRUJKbkk1STF0Vkcwam9xaUV3SHdmV21PWXRycitIRVBKa2d1RXl5b09SMjJmVHo3MXQ3WXBPbDcrTzdQTGRuaHFFSjAyZkJaaGNRa0hpOVNJa29CQW8iLCJtYWMiOiIxNjgwODcxMzI4MTQ0NThlZWE2MzJiZDBiN2JlZTljYmRjYmY1OTYwYmE5NTdiZmQxM2M5OTYxYmFlNGY1YmU1IiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 23:48:54 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IlF0QkpVZHpMNTNOeFpWbk85bDkwSFE9PSIsInZhbHVlIjoiaHdWVGJHR3lsUkd4SEZzWUpPL3F2Mk1RUHV2bGJHN1lCNkNwS2p3ejZSRUJKbkk1STF0Vkcwam9xaUV3SHdmV21PWXRyc" 1 => "askhelpdesk_session=eyJpdiI6ImFWbVJ1VVlKcmdvSHBFM0NFMmIrY2c9PSIsInZhbHVlIjoiWnZpbm5wYk5UUHU4SUV1N1NRaTZRTThKUnI4VFk0Qkdxdjl5Q1VzR0g4SmFFRUUxQVVFcmlkaldITFA4ZUM2ZVRCZ2JVTXYzZlJDZ3Jydzk1NjhodndxSU8zQllQU1RTaGcxUEdSY2pOS2dzRk1PVHJKL2o3d0xja3BzUzQ2dTMiLCJtYWMiOiIxZDFiOTMzYzliMzVjMTZhODQ4NzRjYzY3NGZjNDQ0MDEzYjJjOTNiZjA1ZDc4ZGZlNWRhZDE1MjkxOTkwYzdiIiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 23:48:54 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImFWbVJ1VVlKcmdvSHBFM0NFMmIrY2c9PSIsInZhbHVlIjoiWnZpbm5wYk5UUHU4SUV1N1NRaTZRTThKUnI4VFk0Qkdxdjl5Q1VzR0g4SmFFRUUxQVVFcmlkaldITFA4ZUM2" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlF0QkpVZHpMNTNOeFpWbk85bDkwSFE9PSIsInZhbHVlIjoiaHdWVGJHR3lsUkd4SEZzWUpPL3F2Mk1RUHV2bGJHN1lCNkNwS2p3ejZSRUJKbkk1STF0Vkcwam9xaUV3SHdmV21PWXRycitIRVBKa2d1RXl5b09SMjJmVHo3MXQ3WXBPbDcrTzdQTGRuaHFFSjAyZkJaaGNRa0hpOVNJa29CQW8iLCJtYWMiOiIxNjgwODcxMzI4MTQ0NThlZWE2MzJiZDBiN2JlZTljYmRjYmY1OTYwYmE5NTdiZmQxM2M5OTYxYmFlNGY1YmU1IiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 23:48:54 GMT; path=/XSRF-TOKEN=eyJpdiI6IlF0QkpVZHpMNTNOeFpWbk85bDkwSFE9PSIsInZhbHVlIjoiaHdWVGJHR3lsUkd4SEZzWUpPL3F2Mk1RUHV2bGJHN1lCNkNwS2p3ejZSRUJKbkk1STF0Vkcwam9xaUV3SHdmV21PWXRyc" 1 => "askhelpdesk_session=eyJpdiI6ImFWbVJ1VVlKcmdvSHBFM0NFMmIrY2c9PSIsInZhbHVlIjoiWnZpbm5wYk5UUHU4SUV1N1NRaTZRTThKUnI4VFk0Qkdxdjl5Q1VzR0g4SmFFRUUxQVVFcmlkaldITFA4ZUM2ZVRCZ2JVTXYzZlJDZ3Jydzk1NjhodndxSU8zQllQU1RTaGcxUEdSY2pOS2dzRk1PVHJKL2o3d0xja3BzUzQ2dTMiLCJtYWMiOiIxZDFiOTMzYzliMzVjMTZhODQ4NzRjYzY3NGZjNDQ0MDEzYjJjOTNiZjA1ZDc4ZGZlNWRhZDE1MjkxOTkwYzdiIiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 23:48:54 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImFWbVJ1VVlKcmdvSHBFM0NFMmIrY2c9PSIsInZhbHVlIjoiWnZpbm5wYk5UUHU4SUV1N1NRaTZRTThKUnI4VFk0Qkdxdjl5Q1VzR0g4SmFFRUUxQVVFcmlkaldITFA4ZUM2" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "Yxc9BAPUedy1gjF8MQE9GTG5TNDkplE83Q9qOKkG" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-adjust-the-springs-on-my-attic-stairs" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]