As part of the overall roof system, fascia serves the following purposes:
- It is used to secure the gutters to the roof and keep them in place
- Blocks water from penetrating the roof deck and into the attic/home
- Increases curb appeal by covering the open/rough ends of the rafters
- Closes off unwanted access to the home by insects, birds, squirrels, etc.
What is the cost to replace soffit and fascia?
- 1½” thick insulation* wraps your home in a thermal blanket of protection to help lower utility costs while providing a warm and cozy environment
- The secure interlocking panel design provides a tight fit and clean, crisp course lines
- Surface repels heavy rain while its insulating layer breathes freely to keep your home comfortable
What type of wood is best for fascia?
- Choose the best wood. Handpick each wood fascia board and make sure it's from a species of wood that's naturally decay resistant.
- Watch where you nail your fascia. If at all possible, never nail a fascia board near the edge of the end grain.
- Use the best nails.
- Paint the ends of your fascia boards.
What is the use of fascia in architecture?
- It is more expensive than other types.
- It requires specialist works.
- It is not economical when compared with cost of the small building
- Works only for high pitch roofs.
How much does it cost to install fascia boards?
The national average materials cost to install fascia boards is $1.72 per linear foot, with a range between $1.37 to $2.06. The total price for labor and materials per linear foot is $6.22, coming in between $4.90 to $7.54. A typical 125 linear foot project costs $777.21, with a range of $612.03 to $942.39.
What is the purpose of fascia on a house?
However, the primary role of the fascia is to serve as a barrier between the outside elements and the inside of your roof! While fascia block the risk of weather damage from entering your roof and home interior, it is very important that it remains properly sealed and caulked.
What is the difference between a soffit and a fascia?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
What is the trim around the roof called?
Fascia: Vertical roof trim located along the perimeter of a building, usually below the roof level, to cover the rafter tails at the eaves and to seal off the top of the siding along the rake; also called gutter boards.
Is fascia part of the roof?
The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline. The fascia supports the shingles and helps to keep moisture out.
What is a fascia?
In classical architecture, a fascia was typically a plain, wide band that ran directly above the columns, across the bottom of the entablature. These fascias were often ornately-carved stone and formed part of a cornice .
What is a fascia board?
In more modern buildings, a fascia, sometimes referred to as a fascia board, is a horizontal band which runs along the lower edge of a roof where it overhangs the building’s outer walls, helping close the gap between the roof and the wall .
What is the difference between fascia and soffit?
Fascia boards are typically fixed to the vertical faces of the rafters that form the roof, while soffit boards will typically be fixed to the underside of the rafters to form a ' soffit '. In combination, these elements help to ‘seal’ the roof at its edges.
What is a fascia machine?
Fascia ( / ˈfeɪʃə /) is an architectural term for a vertical frieze or band under a roof edge, or which forms the outer surface of a cornice, visible to an observer.
What is the surface below the rafters called?
The finished surface below the fascia and rafters is called the soffit or eave . In classical architecture, the fascia is the plain, wide band (or bands) that make up the architrave section of the entablature, directly above the columns.
What is the term for a board attached to a projecting gable?
See also. Bargeboard, a board fastened to a projecting gable. Eaves, a roof projection beyond the line of a building. Soffit, the surface or surfaces, often structural under a roof projection. The term used in other structures such as for the underside of an arch.
What is fascia on a house?
Fascia is a common architectural term that refers to the board that typically sits under the roof edge or roof lining. The fascia on a house runs behind the guttering, protecting the rafters and interior components of the roof, from the exterior elements. When building a house or maintaining an older structure, ...
What is fascia in anatomy?
In terms of human anatomy, fascia refers to the connective tissue that wraps around organs, vessels, bones and muscles to hold them in place. Not dissimilar, the fascia on a roof is more or less a horizontal piece ...
What is the purpose of facia?
Besides supporting the guttering and roof like of a building, the facia on the house has many purposes. Fascia boards and trim are essential to every home. Fascia provides a solid foundation and support system for the gutters, while also working to keep pests out of the roof cavity.
What happens if you don't use fascia trim on your house?
If you don’t use fascia trim on the house, there will be no barrier between the exterior and the interior; you’re putting the interiors of the house and the roof cavity at risk of damage.
Why is fascia board important?
The proximity of fascia to the guttering system means that the fascia board is the first element to be damaged by water if the gutter’s become clogged or begin to fail. Fascia boarding is an incredibly important component of a structure that keeps the exterior elements outside of the interiors of the roof cavity.
What is the best wood for a fascia?
Wooden fascia is the most common choice, as it is typically the most affordable option. Wooden fascia generally entails spruce, fir or pine wood. Wooden fascia is not water-resistant and can result in rot and mould over time.
Why is aluminium fascia so popular?
Aluminium is a great choice because it can be bent or wrapped around the pieces of wood, extending the lifespan of building components. Aluminium fascia may come with a more expensive installation cost than wooden materials.
What is fascia on a roof?
Fascia consists of the long straight board along the lower edge of the roof, so how can it be so important? For starters, it’s the last line of support for the lower edge of the bottom row of roof tiles or shingles. Plus, it’s what your gutters are installed on.
Where is the fascia on a house?
Fascia goes hand-in-hand with your home’s soffit. Fascia is the area of siding directly above the soffit. It’s the exposed board you see on the front of your roof’s overhang. Your fascia is also where gutters are placed. Fascia is very visible and needs to be in good shape so your home’s curb appeal isn’t in jeopardy.
Why do you need soffit in your attic?
Aside from keeping moisture out, soffit helps release heat from your attic during the hot summer months. Soffit also helps keep animals and insects out of your home. Bees and wasps love to nestle up in soffit, so you need to keep it maintained to prevent them from invading.
What is soffit made of?
Soffit can be made from wood, aluminum or vinyl. It’s important that you have a soffit material suitable for the climate you live in. For homeowners in the Midwest, vinyl soffit is the way to go. Vinyl soffit has all the same characteristics as vinyl siding, so you know your home will be protected with it and look great at the same time.
Why is fascia important?
Fascia is also important because it’s visible to everyone. If you want to maximize your home’s curb appeal, your fascia needs to look great as well.
Why is it important to keep up with soffit?
The fact is, it’s very important to stay up-to-date on your soffit and fascia if you want to keep a good looking and energy efficient home.
Where is soffit located on a roof?
Soffit is the exposed siding underneath your roof’s overhang. Since your soffit is located on the underside of your roof, it’s often not visible in terms of curb appeal. However, soffit can still be seen when you’re close to the home and when you’re underneath it or at street level.
What is fascia on a house?
The word fascia is Latin for “band” or “bandage,” and both meanings are relevant to fascia board in the context of its purpose as a building material. Roof fascia is the most common type of fascia on a house. It is a short vertical board that covers the roof rafters, installed at the roofline where the edge of the roof and walls meet.
Soffit vs. fascia
When discussing roofs, you’ll often hear soffit and fascia mentioned together. Soffit is siding or other material installed to cover the space where part of the roof hangs over the exterior wall. It can be vented to help circulate air through the attic. Together soffit and fascia hide unsightly parts of the home and shield it from the elements.
Which fascia board material is right for your project?
There are several types of fascia materials, including wood, vinyl, and aluminum.
What is fascia in architecture?
The fascia used in architecture is a bit like the fascia that wraps around your muscles, forming a protective sheath. However, fascia around your house is more or less a horizontal board that covers the exposed trusses or roof rafters at the point where the walls meet the rooftop.
What is the fascia on a roof?
The fascia is the final row of support for the lowest part of the roof shingles or tiles. Aside from that fascia serves the following purposes: • Anchors gutters in place; • Keeps water from leaking into the roof deck and getting into the internal system;
What is soffit made of?
Soffit is usually made of vinyl or aluminum, but wooden soffit is also available. Now, you cannot have a safe household without soffit and fascia working together seamlessly. Soffit helps maintain the airflow between the roof and the attic. It is key in hindering mold growth.
Is vinyl fascia good for cladding?
Vinyl fascia and cladding pairs well together, for example. Whether you decide to use vinyl fascia board or another material, you get benefits like extended lifespan, minimal maintenance, better resistance to damage and inclement weather, and better visual appeal.
Is fascia the same as soffit?
Fascia is not soffit. New homeowners often get confused when they hear their roofing contractor throwing around jargon like “soffit” and “fascia,” and some even end up thinking these roofing elements are the same exact thing. While soffit and fascia are indeed related, they each have their own role to play.
What is fascia board?
Mary McMahon. Fascia board is both decorative and utilitarian. Fascia board is a type of roof trim that is commonly used on houses. It is mounted on the exposed ends of rafters or the top of exterior walls to create a layer between the edge of the roof and the outside.
When replacing fascia board, should you take care to lift any shingles that overlap the board carefully?
When replacing fascia board, people should take care to lift any shingles that overlap the board carefully, and they should take the opportunity to inspect the roof and flashing as long as the boards are removed.
What is the purpose of fascia on a house?
Fascia is another important part of your exterior siding that both looks great and protects the home. Just like soffit, fascia helps seal the rafters so water and pests can’t get in. It takes the combined effort of both soffit and fascia to completely seal the edge of your roof.
Why are fascia and soffit important?
Together, these two exterior components help prevent mold and mildew growth. Fascia helps waterproof the home while soffits allow airflow into the rafters via soffit vents.
What is soffit nailed into?
Soffit is then slid into these channels and lightly nailed into the rafters. Other times, thick solid soffit made of wood or composite is tightly nailed into the rafters . Nails are then covered up by overlapping pieces of soffit or trim. Fascia is nailed directly into the fascia board with either nails or screws.
Why does fascia interact with soffit?
Fascia interacts with your home’s soffit because it’s the area of siding directly above the soffit. Sometimes the fascia is bent at the bottom which helps hold the soffit in place. It’s very visible and should be kept in good condition. Beautiful custom home with metal fascia and wood soffit with decorative elements.
What is soffit siding?
Soffit is an important part of your home’s exterior siding design. But looks aside, soffit’s most important job is protecting the home from water damage and providing ventilation. Every part of your home’s siding has a duel purpose. Form and function.
What is the best color for soffit?
Composite materials, like Azek, are generally white, which is good because white is the most common soffit and fascia color. Making sure your soffit and fascia are both installed properly is the best way to prevent problems down the road. Roofing and siding products primary use it to prevent water damage.
What is fascia board made of?
All About Fascia. Just like soffit, fascia can be made of metal, wood, fiber cement, vinyl or composite. Both fascia and fascia board are designed to block the elements from getting into your home. Without them, water, snow, ice and moist air could blow right into your rafters and onto your wood frame.
