What is an SWG pool and how does it work?
SWGs are designed to produce small amounts of chlorine continuously. This is perfect for day to day use and actually allows you to use a slightly lower FC levels than you need when adding chlorine manually. Adding salt to the pool does very slightly increase the risk of corrosion. Hardly any SWG owners experience a problem with corrosion.
What is an SWG chlorine generator?
SWGs are intended to produce modest quantities of chlorine continuously. This is ideal for daily use and enables you to use a bit lower FC levels than you require when adding chlorine manually. Adding salt into the pool does a little bit to increase the chance of corrosion.
Why is there algae in my pool with a SWG?
A pool with a SWG can have algae even when the water is relatively clear. Third, there may be some problem with the SWG, though this is much less likely than the first two possibilities. SWGs are not good at SLAMing (or shocking) the pool because SLAMing depends on the FC level going up quickly and a SWG only adds chlorine slowly.
What does the percentage setting on a SWG do?
Most SWGs provide a percentage setting that controls how much chlorine they produce. This setting controls the percentage, of the time that the pump is running, during which the SWG is producing chlorine. To produce more chlorine you increase the percentage, to produce less chlorine you lower the percentage.
What does SWG mean pool?
Yes, it is a saltwater chlorine generator (SWG).
How does a SWG work?
A secure web gateway (SWG) protects users from web-based threats on the Internet by preventing malicious content from accessing the endpoint. SWG solutions typically work by blocking inappropriate or malicious websites based on policies set by the enterprise cybersecurity team.
How do you shock a SWG pool?
If using 6% liquid chlorine bleach, add 5 gallons per 10000 gallons. Add the Shock: With the filter system running, and the pH on the low side, 7.2-7.4, add the chlorine (granular or liquid) slowly to the pool, dispersing it around the pool edge, or broadcasting the pool shock over the surface.
How do you add salt to a SWG pool?
2:324:13How To: Add Salt To Your Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor best results empty the required salt into the shallow end of the pool. And let it dissolve andMoreFor best results empty the required salt into the shallow end of the pool. And let it dissolve and circulate through the main drain salt may take about 24 hours to dissolve.
What is umbrella SWG?
Cisco Umbrella's SWG is a full proxy that logs and inspects your organization's web traffic to deliver full visibility, URL and application-level controls, and advanced threat protection.
What is SWG CASB?
A CASB solution with a native API integration can provide more granular protection than a simple in-line SWG solution. In contrast, SWG solutions offer broader protection, providing a safe Internet use solution without some of the granular SaaS protections that CASB offers.
Should you turn off salt cell when shocking pool?
This is why many pool experts recommend that you turn down, or shut off, your saltwater chlorine generator (SWG) while you're shocking your pool. Otherwise, you're running the risk of damaging the salt cell. And that could lead to it not generating enough chlorine after the shocking process finishes.
Can I add salt and shock to my pool at the same time?
Should you add shock to a salt water pool? It's absolutely okay to shock your salt water pool, and is actually pretty important!
How long should you wait to swim after shocking pool?
And how long do you have to wait before you can swim? You should wait one hour per pound of shock product added, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.
What happens if salt level is too low in pool?
If the level is low, determine the number of gallons in the pool and add salt according to the chart below. A low salt level will reduce the efficiency of your salt chlorinator and result in low chlorine production. A high salt level can cause your chlorinator to shutdown and may begin to give your water a salty taste.
How often should salt be added to pool?
How often do I need to add salt to my pool? There is no set timeframe of when you need to add salt to your pool. Because salt does not dissipate from your water, the only time you would add salt to your pool is when you add fresh water or after heavy rain that dilutes salinity levels.
Can I add salt to my pool without a saltwater system?
Adding salt, without a SWG, gives the water what many people describe as a silky feel, but it doesn't give you any of the other advantages of a SWG. For example you can't use lower FC levels with salt the way you can with a SWG.
What is a SWG generator?
Saltwater Chlorine Generator (SWG) uses electricity to convert salt to chlorine. As the chlorine gets used up, it turns back to salt, ready to be reused. With an SWG, you are yet using chlorine; the SWG simply helps to add the chlorine for you.
How often should you clean a SWG cell?
You should clean the SWG cell once per season or when there in an issue. The cell ought to be clear of debris, and the plates must appear either metallic or black.
What is the cell in a salt generator?
The cell is the section of the salt generator that turns salt into chlorine. Water crosses through the cell and above with iridium or ruthenium coated solid plates. These naturally occurring metals are charged from the control board turn the salt to chlorine through electrolysis.
What is the purpose of the control center in a chlorine generator?
The control center of the system, its primary purpose is to give electricity to the salt chlorine generator for the transformation process. Additionally, it lets you control the quantity of power sent to the mobile, thus allowing you to increase or reduce the amount of chlorine in the pool.
Toddro61
I live in Austin and I can say that my salt water chlorinator cut my pool maintenance by 90%. Chlorine is very expensive and with the Texas sun you will be spending tons of money on it if you try to chlorinate the traditional way (not to mention all the time you will spend trying to maintain the chlorine level).
chem geek
Interests:Interested in pool water chemistry. Undergrad degree in physics/chemistry. MBA. Other interests include swimming, skiing, genealogy.
Strannik
So far the only person I've seen who actually hates them is thepoolguy (you can google for his blog). This guy seems to have a real hate towards salt water pools.
.JPG)