US Screw size conversion chart:
| Screw Size | Inch Decimal | Nearest Fraction | Metric Equivalent |
| #0 | 0.060 in. | 1/16" | 1.52 mm |
| #1 | 0.073 in. | 5/64" | 1.85 mm |
| #2 | 0.086 in. | 3/32" | 2.18 mm |
| #3 | 0.099 in. | 7/64" | 2.51 mm |
What does M10 stand for?
metric Measurement Excellence and Training Resource Information Center (Virginia Health Services Research and Development Service) Multi-Echelon Technique for Recoverable Item Control
What size hole to drill for M10 bolt?
The manufacturer, Fischer, specifies a 16mm hole to be drilled. One may also ask, what size is m10? 31496") The M10, about 10 mm in diameter, (. 3937") and the M12 about 12 mm in diameter, (. 4724"). The "M" designates the bolt is Metric and the number after the M indicates the size.
What size wrench fits M10 bolt?
Metric Bolt Head and Wrench Size
- Privacy. We don't collect information from our users. Only emails and answers are saved in our archive. Cookies are only used in the browser to improve user experience.
- Advertise in the ToolBox. If you want to promote your products or services in the Engineering ToolBox - please use Google Adwords.
- Citation
What is the hole size of M10 thread?
The allowable minor diameter indicates sizes from minimum to 6H, but the fine threads smaller than M1.8×0.2 are 4H and that of smaller than M2×0.25 are 5H.
What is M10 screw size?
Metric clearance and tapping drill hole sizes.SizeClearance Hole mmTapping Drill (std Pitch)M10118.5 mmM121410.25 mmM161814 mmM202217.5 mm5 more rows•Jun 19, 2020
What size is M10?
SizeClearance HoleTapping Drill (fine pitch)M897 mmM10119.0 or 8.75 mmM121410.5 mmM161816.5 mm5 more rows
What size is M10 in inches?
Tap sizeBasic major dia (mm)Basic major dia (inch)M8 x 18mm.3150M10 x 1.510mm.3937M10 x 1.2510mm.3937M12 x 1.7512mm.472424 more rows
Are M10 and 3/8 the same?
That said, they are very close, the 3/8" bolt is about 0.019" smaller and the pitch's are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..
Does M10 mean 10mm?
If the size is M10 x 25, that would mean that the diameter is 10 mm.
Is an M10 bolt 10mm diameter?
Steel bolt with M10 metric thread. Metric threads are designated with a capital M plus an indication to their nominal outer diameter and their pitch: This bolt is M10 x 1.5 - which means the outside diameter is 10mm and the threads are 1.5mm apart (the most common thread pitch for M10).
What size is M10 in Imperial?
Body Size MetricNearest Imperial Equivalent SizeM5-10-32M6-1/4-28M8-5/16-18M10-3/8-164 more rows
What size is a M10 nut?
10 mmM10 nuts have a diameter of 10 mm and are one of the most common sizes of nut available. We stock different types of 10mm nut such as tee nuts, wing nuts and standard 10mm locking nuts.
What size drill bit do I need for an M10 bolt?
We use a Fischer type M10 shield anchor. These are specified using a high-grade steel with a corrosion resistant zinc plated finish. The shield requires a 16mm hole to be drilled that is dust and debris free.
What is M10 equivalent to?
Thread conversion tableMetric coarseMetric fineBSF/BSWM6 x 1M6 x 0.751/4"M8 x 1.25M8 x 15/16"M10 x 1.5M10 x 1.253/8"M12 x 1.75M12 x 1.251/2"12 more rows
Which is bigger 10mm or 3/8 inch?
10mm = just over 3/8 inch. 11mm = almost 7/16 inch.
Will a 10mm bolt fit a 3 8?
Yes, a 10mm hanger will physically fit on a 3/8" bolt. 3/8" = 9.525mm I don't see any problem with that at all.
What is the size of a metric screw?
The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). For nuts, size will appear as diameter and pitch. There is an exception though—if pitch isn't specified, the fastener is coarse threaded. Consider this size….
What is M12 thread?
M12 is a matching coarse threaded nut. (To avoid confusion, we always include the thread pitch for both coarse and fine metric fasteners.) If you normally work with inch fasteners, pitch can be a little confusing—pitch is the distance between adjacent threads. In the example above, a pitch of 1.0 means that from one thread to the next thread, ...
What is a thumb screw?
These metric thumb screws are made of chemical-resistant 18-8 stainless steel. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.
What are metric screws used for?
These metric lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects. They're commonly found in hand-powered clamps, vises, grates, doors, and work tables.
What is a dog point screw?
Also known as dog-point set screws, these metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. Made of 18-8 stainless steel, they have good chemical resistance.
What is a class 8 screw?
These Class 8. 8 steel screws are suitable for fastening most machinery and equipment. They are over 50% stronger than stainless steel thread-locking screws. For vibration resistance, they have a thread locker bonded to the threads.
What is a metric button head screw?
Made from 18-8 stainless steel, these metric button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant hex drive (also known as a pin-in hex drive) makes them difficult to remove without special tools.
What is metric set screw?
Made from alloy steel, these metric set screws have a thin edge that digs into hard surfaces for a secure hold. They have a nylon locking patch that grips threads to resist loosening.
How to use metric screws?
Turn these metric screws by hand using the hex head, or tighten them with a wrench for extra torque. With an extended tip that locks into a mating hole or slot— sometimes known as a dog point— they are often used to align and secure parts such as gears and pulley wheels.
What size spanner fits a M10 bolt?
A 17mm spanner therefore fits a nut 17mm across its flats and this is normally a nut to fit a 10mm diameter bolt (M10). Also, hexagonal key sizes are given as the distance across their flats and so a M10 Allen Screw for example would need a 8mm key to fit it.
What does the M before a number mean?
The M before a number stands for metric. The next number is the diameter size. For example, M8 is a metric screw and has a diameter of 8mm. To tell the difference, there are several options available. I’ve seen people simply drill holes into wood using the appropriate sized bit as a measuring gauge.
How many thread pitches are there in a SAE?
There are for each system SAE or Metric, a number of standardized and common sizes and threads; usually for each diameter there are at least two common thread pitches, fine and coarse versions. Plus a variety of head types. Typically there are standard head sizes for each diameter. Related Answer.
What is the M series thread?
They were one of the first international standards agreed upon when the International Organization for Standardization (ISO) was set up in 1947. The design principles of ISO general-purpose metric screw threads ("M" series threads) are defined in international standard ISO 68-1. Each thread is characterized by its major diameter and its pitch.
What does TPI mean in fasteners?
Thread Count (TPI) TPI stands for Threads Per Inch, which means the total number of threads per inch measured along the length of a fastener. TPI is used only with American fasteners. Metric Fasteners use a thread Pitch. In general, smaller fasteners have finer threads, so the thread count is higher.
Why use superfine pitch threads?
This is because extra fine threads are more resistant to coming loose from vibrations.
What is thread pitch?
Metric fasteners are specified with a thread pitch, instead of a thread count. The thread pitch is the distance between threads expressed in millimeters. In general, smaller fasteners have finer threads, so they have a lower thread pitch.
