What is a linear foot for countertops? Countertops are typically measured by contractors and fabricators in a unit called "linear feet." This unit is simply the total length in straight lines (thus the term "linear") of a countertop of a given depth.
How do you calculate the square footage of a countertop?
You Will Need:
- Measure the length of all your countertops, including the base cabinets and the island area if necessary.
- The standard width of a countertop is 26 inches.
- Add the two totals together and that is your overall estimate of the granite needed in inches.
What is the average size of a kitchen countertop?
What Size Slab Do I Need for My Countertops?
- Countertop Measurements and Your Stone Slab. Many homeowners choose to buy an entire slab to cut their countertops and additional stone surfaces.
- Artistic Cuts Along the Grain. As stone fabricators, we are passionate about beautifully cut countertops. ...
- Ways to Use Your Slab Remnants. ...
How to measure square footage of your countertop?
Things to Remember When Measuring and Budgeting for Counter-tops:
- The average slab size is 120×55” (or about 41 square feet). Some stone types come in jumbo slabs as well. ...
- Don’t forget the backsplash. If you decide to have a backsplash from the same materials as the countertop, plan for an extra 4-inch-wide section across the length of the ...
- Don’t forget to plan for labor and fabrication costs! ...
What is the standard width of a kitchen countertop?
What Is the Standard Width of a Kitchen Countertop?
- Typical Countertop Dimensions. Unlike kitchen base and wall cabinets, there are no standards for complete countertop dimensions. ...
- Countertop Length and Thickness. Big-box home improvement stores also sell pre-cut countertops in a few standard lengths, such as 4, 6, 8 or 10 feet.
- Kitchen Island Widths. ...
How do you figure linear square feet for countertops?
2:186:19Step-by-Step Guide to Measuring Your Countertop for RemodelingYouTubeStart of suggested clipEnd of suggested clipBox number two which I've subtracted the width of the counter that gives us 84 point five timesMoreBox number two which I've subtracted the width of the counter that gives us 84 point five times twenty five point five again your inches divided by 144. Here's your magic number.
How much is a linear foot of countertop?
You also need to measure how tall your countertop should be. This is often represented as linear feet instead of square feet when you shop around. The equivalent of a linear foot is 12 inches by 12 inches. The depth of a linear foot is 25 inches while the width about 12 inches.
How do you calculate a linear foot?
To measure linear footage, start by measuring the length in inches. Then divide the total inches by 12. The length is the linear footage, so no fancy linear foot calculator is required.
How many linear feet of countertops are in an average kitchen?
Depth and Length The standard depth for cabinets and countertops is about 25 inches. Therefore, the 30 sq-ft average assumes a total countertop length of about 14 feet.
Is granite sold by the linear foot?
The price is often calculated by linear foot. Although you might not be able to minimize the length of the edge that is polished, the edge itself will have an impact on the price. Standard edging will keep the cost to a minimum.
How much is a 10 ft granite countertop?
Granite countertops will cost you around $40 to $60 per square foot, with the total price for installation and materials coming in between $2,000 to $4,500.
How many linear feet are in a 10x10 kitchen?
20 linear feetThere are 20 linear feet in a 10x10 kitchen. Simply divide your 10x10 kitchen price by 20!
What is the difference between linear feet and regular feet?
A linear foot is similar to a standard foot in that it is also equal to 12 inches (one foot). A linear foot differs slightly in that it measures the distance from point A to point B in a straight line.
How wide is a linear foot?
12 inchesRemember, a linear foot is 12 inches in a straight line. A linear foot measured on a ruler and two measuring tapes. If you measure something and it's 12 inches long, it's one linear foot in length. If it's 24 inches long, that's two linear feet, etc.
How do I figure out how much countertop I need?
To calculate the total square footage (after placing seams) you will need to follow this formula: “L” x “W” / 144 = s.f. (Length times width divided by 144 = square feet).
How are countertops measured?
To measure your countertops, start by measuring the length of all counter tops, base cabinets, and island. Also include the inches of back splash. Now measure the width of the counter tops and multiply the total length of the counter tops by the width in inches.
How many feet of kitchen countertop do I need?
Many experts suggest that any kitchen should have at least a minimum amount of 13 feet of countertop surface. Trying to squeeze more countertop than this into a small kitchen could rob the room of other features like a sink or stove large enough to meet your needs. Or it may make the room hard to safely walk around in.
At a glance
Simply put, a linear foot is 12 inches in a straight line—hence “linear.” Basically anytime you measure something in a straight line in the United States, you’re measuring how long that thing is in linear feet.
The full picture
If you have a ruler or a measuring tape with markings in one-inch increments, you’re ready to measure anything in linear feet. Remember, a linear foot is 12 inches in a straight line.
FAQs about linear feet and other measurements
A linear foot is 12 inches in a straight line, which is why it is called a “linear” foot.
Recommended resources
Looking up measuring info because you’re planning a move and need to know how big your stuff is? These resources can help you plan and prepare for moving day:
How many inches is a linear foot?
There’s a reason this measurement is so important. But in short, a linear foot is simply twelve inches that are in a straight line. Many construction materials are sold by linear foot. This includes boards and other oblong materials that depend on the length rather than the width.
What is square foot in construction?
Square foot covers a surface area and is the most common type of measurement used in construction. It is two measurements, length times width. Here are a few things that are measured by square feet.
What are the two measurements used to sell materials?
There are two general measurements used to sell materials. Square foot and linear foot. But another important measurement is the cubic foot, which measures the length, width, and height, rather than just one or two measurements. That’s a good way to remember which one is which.
How to measure a 10x10 room?
Measure the length of one wall first. For a 10×10 room, this will be ten feet. This is a linear measurement. Then, you take that same wall and measure the height. This is another linear foot measurement.
What is cubic feet?
Cubic feet is actually another word for volume. So if you learned that in school, you can figure cubic feet. It is length times width times height. Here are a few things sold by the cubic foot.
What is the easiest construction measurement?
Learning each of them can help save you a lot of time, money, and headaches. One of the easiest yet most important terms of measurement is the linear foot.
How to measure the length of a wall?
You simply measure the length of a wall. then, measure the length of the opposite wall in the same room. You can generally assume that each opposite wall is the same. Finally, you measure the other two walls. Length only, not height. Now, add all four lengths together. This number is the linear foot of the room.
What is linear feet?
By definition, "linear feet" are measured in feet. However, the individual pieces you need may be measured in inches or a combination of feet and inches. It may help first to convert all your measurements to inches, then add them, and convert to feet and inches in your final step.
How many linear feet of countertop material are needed?
Thus, the total number of linear feet of countertop material that you need is 2+3+2=7 feet. Check your project instructions. For some projects, the design plan or instructions may tell you the number of linear feet that you need.
How to find the total number of linear feet?
Add the individual lengths together. To find the total number of linear feet that you need for your project, add together the lengths of the individual parts. Imagine the individual pieces lined up end-to-end and determine the length from one end to the other. In the countertop example, you need three pieces of two feet, three feet, and two feet.
How many tiles are needed to make 70 linear feet?
If you put two of them together end to end, it will be 3 inches wide and a foot long. To make 70 linear feet, 3 inches wide, you need 140 (70x2) tiles. You don't say how wide you want the tiling to be.
How to measure the length of a piece?
Measure the lengths of the pieces you need. Review the design plan for your project. Identify all the pieces of any particular material type that you need. Determine the length of each separate piece.
How to find the square footage of a deck?
Assume for this example that you are building a simple rectangular deck. The area is found by multiplying the length of the deck by its width.
Measuring Your Backsplashes
In addition to calculating your countertop square footage, most people want a small backsplash that backs the countertop along the wall. To calculate your backsplash, take the combined length of each backsplash section. Multiply that combined length by the height of the backsplash you want to have installed.
The Average Countertop Square Footage
The average measurement for a kitchen countertop is 30 square feet. However, the variation between kitchen designs is vast. There are kitchens with much smaller or significantly larger countertop measurements. The right size for your kitchen will depend on the floorplan and counterspace you want in your kitchen design.
How to Calculate Square Feet from the Measurement in Inches
For example, say the length of the countertop is 108” and the depth of the standard countertop (on a 24” deep cabinet) is 25 ½”;
What About the Sink Cutout?
If you have cutouts in your countertop, include them in your square footage requirements. Because we’ll be cutting your countertops from a solid slab, cutouts and shaping till factor into the size of the countertop you’ll need.
What Size Slab Do I Need for My Countertops?
The average size of a countertop-ready stone slab is about 115″ by 70″, or 60-70 square feet each – give or take according to the slab, quarry, and shipment.
Waterfall Islands and Counter Ends
What about waterfall counter design? A waterfall counter is one where the slab extends vertically beyond the edge of an island or countertop end. Often, it is cut artistically so the grain extends perfectly, like a waterfall, over the top and edge of the counter to spill down the side.
