Receiving Helpdesk

what is a heatilator fireplace

by Miguel Halvorson I Published 3 years ago Updated 3 years ago

Heatilator fireplaces, also known as "old-style zero clearance fireplaces", are a combination of heater and ventilator and are by their nature, fireplaces that circulate air. Old-Style Heatilator Fireplaces use a special venting system that draws in cool room air and releases it as warmer air.Jun 17, 2020

Full Answer

How do I remove a heatilator from my fireplace?

How to Clean the Glass on a Gas Fireplace. This video walks you through the steps of cleaning the glass on a gas fireplace. YouTube. Heatilator Fireplaces. 980 subscribers. Subscribe. How to Clean the Glass on a Heatilator® Gas Fireplace Video. Watch later. Copy link.

What is the best electric heater for a fireplace?

The best electric fireplace heater that you can buy right now is the Carlisle Infrared Electric Fireplace Heater.

How does a heatilator wood burning fireplace work?

  • The flue damper must be fully opened
  • Put twisted papers at the bottom of your fireplace
  • Place a tent made of chopped wood on top of the fireplace grate
  • To reduce smoke, pre-heat your flue
  • Place a piece of burning paper under a flue damper
  • You can also add 3-4 pieces of split firewood

Which fireplace is best?

The 10 Best Fireplace Inserts of 2021

  • Classic Flame 23” 3D Infrared Quartz Electric Fireplace Insert. ...
  • Vogelzang Plate Steel Wood Burning Insert with Blower – 69,000 BTU. ...
  • Home Decorators Collection Brindle Flame 20 in. ...
  • Symple Stuff Brimfield 23.5” W Electric Fireplace Insert. ...
  • Valuxhome Electric Fireplace, 36 Inches Fireplace Insert. ...
  • Red Barrel Studio Hull Electric Fireplace Insert. ...

Are Heatilator fireplaces good?

Builders install Heatilator fireplaces because they know it's the best fireplace brand, assuring their customers many years of comfort and reliability at a reasonable price. For this reason, Heatilator is often referred to as “the first name in fireplaces.”

Can you burn wood in a Heatilator fireplace?

An example is the Heatilator Constitution wood-burning fireplace. This attractive clean-burning unit can provide heat for up to 10 hours on just one full load of wood.

Are Heatilator fireplaces vented?

With Direct Vent fireplaces and inserts, 100% of combustion exhaust and fumes are removed from your home. These sealed fireplaces provide optimal heat, conserve energy and ensure clean, safe indoor air quality.

Are Heatilator fireplaces still made?

Established in 1927, Heatilator has built a long standing reputation for providing quality, dependable hearth products at unbeatable values. Today, Heatilator remains the most preferred, recommended and installed fireplace brand among building professionals.

Can you put a insert in a Heatilator fireplace?

An insert will make your masonry fireplace significantly more efficient. As the name suggests, a fireplace insert fits directly into your existing fireplace, greatly enhancing its performance and beauty. Inserts are available in multiple designs and fuel types.

How much is a Heatilator fireplace?

Starting at $2,398. The Novus is everything you need to provide your family and friends the comfort which has made it the best-selling gas fireplace of all time. The versatile Novus gas fireplace with glowing embers fits into almost any lifestyle and space, where other fireplaces can't.

Can you cover heatilator vents?

You cannot block those air ducts. You have soot tracks indicating significant heat/ smoke movement outside of the firebox. I stronly suggest you get a qualified hearth professional to inspect the fireplace and open the walls to ascertain if there is any fire damage first.

Where are Heatilator fireplaces made?

Mt. Pleasant, IowaThe manufacturing facility relocates to Mt. Pleasant, Iowa. The Heatilator Mark 123 is introduced. It goes on to become the biggest selling masonry form in the industry.

Why is there a hole in the bottom of my fireplace?

An ash pit is a hole in your firebox in which old ashes can be placed. Its convenient location allows you to sweep in any ashes and embers, then seal them in by closing a small door. Ash pits are designed to withstand the heat from your fireplace while being easily accessible for the homeowner.

How do you light a Heatilator fireplace?

Locate the control knob, push it in, and rotate so “pilot” is at the hash mark. While still pushing on the knob, press the igniter several times until it fires. Continue pushing in on the knob for about 30 seconds to ensure it stays lit. If it doesn't light, wait five minutes and retry.

How do you turn off a Heatilator in a gas fireplace?

Remember to shut the gas supply valve off (picture #1). If it remains lit, press the valve knob in slightly and rotate counter-clockwise until the word "ON" is in the 6 o'clock position. STEP 8: Finally, turn the unit's ON/OFF switch (or wall switch or remote control) to the "ON" position to start your fire.

How do you replace a Heatilator on a fireplace?

0:014:05Heatilator Firebox Remove and Replace - YouTubeYouTubeStart of suggested clipEnd of suggested clipAreas where creosote can form behind the steel. And when they fail it's got to be cut out andMoreAreas where creosote can form behind the steel. And when they fail it's got to be cut out and removed. So once the steel is taken out we then are left with exposed masonry.

Why do we need a heatilator in a fireplace?

Old-Style Heatilator Fireplaces are constructed with a double walled fireplace that keeps the heat where it belongs. Since the fire is kept in the fireplace chamber itself, Heatilators are able to avoid the transfer of excess heat into the walls of the home. This is an important safety feature because over time, excess heat transfer can accelerate the degradation of building materials. In extreme cases, heat transfer can contribute to the danger of combustion within the walls of the home. The double walled fireplace will minimize these hazards.

How does a blower work in a fireplace?

A blower increases fireplace efficiency by evenly distributing warm air throughout the home which maximizes the performance of your fireplace thereby ensuring that it increases the amount of heat it gives off . Mantle - A fireplace mantle is a decorative framework around the fireplace.

What is the smoke chamber on a fireplace?

Smoke Chamber - The area above the fireplace and below the flue, used to allow smoke to mix and rise into the flue.

What are wood stove hearth pads?

Hearth pads are sections of fireproof material that can be used underneath wood, pellet and gas stoves to protect floors from sparks and embers and on the back walls behind heating appliances to protect the walls from intense heat. Shop Now.

Where is the firebox on a fireplace?

The firebox normally sits on a masonry base at the floor level of the room. Hearth - The fireproof area directly in front of a fireplace. The inner or outer floor of a fireplace usually made of brick, tile, or stone. Bottom Air Vent - The bottom air vent on Old-Style Heatilator Fireplaces are where cool room air is drawn into the fireplace.

How do I protect my mantle from the heat?

Shield your mantle and surrounding woodwork from the heat of the stove with a Homesaver Mantel Shield. It's easy to install, just cut the shield to your size requirements and use the included hardware to attach it to your mantel.

Why is a double walled fireplace important?

In extreme cases, heat transfer can contribute to the danger of combustion within the walls of the home. The double walled fireplace will minimize these hazards.

What is a fireplace blower?

A fireplace blower blows the warm air to your room. It uses a little space at the back of the fireplace. When the cool air warms up in the fireplace, it blows out the air from the unit.

What is an old style fireplace?

Old-style fireplaces are a great combo of ventilators and heaters. They use a unique venting system that pulls the cool air and releases the same air after making it warm.

Why is a chimney important?

The chimney keeps the flue heat and prevents the contact of heat with other flammable materials. It also helps to eliminate the toxic fume and smoke out of the house.

How does a blower work?

The blower helps to circulate the warm air in the room. The fan motor and baffles of the blower help to do the job smoothly. The fan pulls cold air, warm it up within the baffles. After that, the air blows out of the room.

Why do fireplaces have grates?

Many fireplaces come with a grate that facilitates fire build up above the hearth. You can place the grate in your living room. It will help to air supply and hold the fuel in its place.

What does the opening of a fireplace do?

The fireplace opening let the user light the fire. You can build a fire from here and the fire will produce heat. The opening of the fireplace also will allow the radiation of heat through the house.

How long does it take for a blower to turn on?

It takes around 10-20 minutes to turn on and off or to complete the process once. It can not turn on and then turn off instantly. The blower needs at least 10 minutes to do the job.

Operational Instructions For Your Fireplace

The following heatilator wood fireplace instructions would help you to know how the Heatilator wood fireplace work and allow you to operate your fireplace properly.

Heatilator Wood Fireplace Manual: The Main Part

Before installing your fireplace there are few things you need to take into consideration. They are as follows.

How does a Heatilator fireplace work?

Heatilator fireplace works with a air circulation method. First, it circulates the hot air around the firebox and then it spreads it all around the room.

Why does my Heatilator fireplace keep going out?

Dirty pilot orifice and pilot burner are the reasons behind your fireplace shutting off.

Can you manually light a Heatilator fireplace?

Yes, you can. If power is actively supplied to your fireplace, just turn the on/off switch to on mode and you’re the main burner will ignite.

How do you light a fireplace without electricity?

You can light your fireplace without electricity using battery backup. And in case of a standing pilot with your gas fireplace, it will light itself without electricity.

Conclusion

A fireplace can be a big headache sometimes as it contains many different and small elements. So, to install it properly just follow the instructions given in this article and you won’t face many problems.

How far away can you draw heat from a fireplace?

Draw heat from the fireplace to another room in the home, up to 20 feet away. When a Heat-Zone kit is run continuously, it can redirect up to 25% of the heat to another area, also reducing wall temperatures above the fireplace. Two Heat-Zones run continuously will redirect up to 50% of the total heat output.

What is heat management?

What is the concept of “heat management”? 1 Ability to control where, how and when heat from a gas fireplace is managed within the home#N#Extended daily and year-round enjoyment

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9