Stub out meaning A stub out pipe, also called a pipe out, is the portion of a pipe that is exposed when the pipe is installed during gas, plumbing, or electrical rough-in processes and is ready for connection to a device or fixture. They come out of plumbing walls and can be seen as sealed-off pipe endings.
What does stub out stand for?
stub out. To extinguish a lit object, especially a cigarette or cigar, by pressing the lit end against a hard surface. A noun or pronoun can be used between "stub" and "out." He stubbed out the cigarette and got up to leave. I'm so sorry, I didn't realize the smoke was bothering you. Let me stub this out.
How to install stub out?
Things You'll Need
- Sand
- Saw
- Tape Measure
- Pipe Adhesive (If Needed)
- Rebar (If Needed)
- Pipe Wrench (If Needed)
- Duct Tape
- Teflon Tape (If Needed)
- Stub Out Pipe
What does stub out mean in plumbing?
How to Plumb a Stub Out
- Preparation. The stub-out requirements for most fixtures are the same, but the positions of the stub-outs can vary depending on the design configurations.
- Water. Unless you have an unusual pipe configuration, there will be a 90-degree elbow at each mark you make for a water supply stub-out.
- Wall Drains. ...
- Floor Drains. ...
How to write a stub?
We have to tweak it a bit to:
- Use the Maven Wrapper ( mvnw) script as recommended by the official Spock reference.
- Use a project-wide cache to speed up build time.
- Separate building from testing so it’s easy to add more tests later.
What does stub out mean?
phrasal verb. When someone stubs out a cigarette, they put it out by pressing it against something hard. Signs across the entrances warn all visitors to stub out their cigarettes.
How do you stub out water pipes?
1:312:30HOW TO STUB OUT PureFlow PEX | Viega - YouTubeYouTubeStart of suggested clipEnd of suggested clipSupport or an elbow to make the tight radius 90 degree turn 4 bend stub outs with a flange secure.MoreSupport or an elbow to make the tight radius 90 degree turn 4 bend stub outs with a flange secure. The flange to the wood via wood screws trim. The packs to the appropriate length leaving.
What is a stub out in construction?
Stub outs are greywater collection plumbing which dead ends at a cap. They provide for for easy diversion of graywater to a future graywater system to be made during the construction of a house, without having to install the complete graywater system.
What is a stub pipe?
Pipe stub outs are pipes that stick out from a wall or pipe tee. Stub outs are also called stub-ups. They are capped until a branch pipe is attached. The branch pipe can be inserted after the pipe cap is removed.
How far out should a stub out be?
Wall Drains Like the supply stub-outs, the drain stub-out extends from a fitting -- usually a sanitary tee -- to a point 3 or 4 inches beyond the wall. The drain, which is usually 2-inch plastic pipe, maintains a minimum slope of 1/4 inch per foot from the stub-out to the point where it ties into a main waste pipe.
What does stub up mean?
Home / Glossary / Stub-up. A term used to indicate that preparation has been made to install a fixture. An example is that a drain pipe is stubbed up in the floor in preparation for attaching a toilet.
What is a plumbing leave out?
These are sections of the slab that are left unfilled with concrete so that plumbing penetrations may be manipulated and so that the structure may drain in the event of any future leaks. ... Think about it: Leave-outs can be as large as 2' x 2' and scattered around the footprint of a home or structure.26-Jun-2017
Why are stub outs called stub outs?
So-called because they extrude from the wall at locations where new fixtures are slated to go in, plumbing stub-outs are the end result of the rough-in phase of a plumbing installation.
What is a drain stub out?
The drain stub-out represents two separate pathways. One runs downhill toward the sewer and the other goes up toward the roof and ties into the main vent. Like the supply stub-outs, the drain stub-out extends from a fitting -- usually a sanitary tee -- to a point 3 or 4 inches beyond the wall.
Where do stub outs go?
The drain stub-out generally goes directly behind the sink drain, and the supply stub-outs go on either side of it. Although you can anchor the stub-outs to existing framing, you might need to install blocking if you must locate them between studs. Once you've determined the positions of the stub-outs and nailed in all the necessary blocking, it's prudent to mark those positions so you won't lose track of them while doing the plumbing.
How much slope do you need to run water from a stub out?
The slope rule for running pipes from floor stub-outs is the same as the one for wall stub-outs: you must maintain a 1/4-inch per foot minimum slope to keep water running. Advertisement.
What is a stub out in plumbing?
The plumbing stub-outs are the end result of the rough-in phase of plumbing a residential or commercial building. They are usually installed while the walls are still uncovered; and after the drywall work and painting is complete, a plumber comes back and hooks them up to the plumbing fixtures. There are two kinds of plumbing pipes in ...
What is a capped pipe?
The plumber solders on a cap that gets cut off prior to connecting the fixture. The capped pipe is a supply stub-out.
How many kinds of plumbing are there in a building?
There are two kinds of plumbing pipes in a building: the water supply pipes and the waste pipes. Consequently, there are two kinds of stub-outs.
What size drains do toilets use?
Toilet waste lines, usually 3 inches in diameter , connect directly to the soil stack, and fixture drains typically connect to the toilet waste lines. Plumbers make fixture drains with 2-inch plastic pipes -- either PVC or ABS.
Do fixture waste pipes need venting?
Another difference is that fixture waste pipes need venting, so you may have to tie in a pipe that rises to meet the main vent if the soil stack is too far away. The size of this pipe and its distance from the opening of the stub-out are dictated by the plumbing code.
