What are the red numbers on a tape measure?
- #1: The top row of numbers are your imperial measurements.
- #2: The bottom row of numbers are your metric measurements.
- #3: The line that hits the blade right before the “1” is a ½ inch.
- #4: The blade indicates zero inches or centimeters.
- #5: Every number on the top represents a whole inch.
What do the red markers on a tape measure mean?
We typically see the measurement increments of 16, 32, etc. on the tape measure. These red markers in increments of 16 are used mostly by construction workers to mark off stud placement.
What do the numbers on a tape measure mean?
On every tape measure, there are both small and large tick marks and sometimes numbers. The biggest tick mark usually denotes inches, the second biggest denotes 1/2 inches, and so on. The largest numbers correspond to inches, with fractions of inches being in between each of the largest numbers.
How do you read a 1/2 tape measure?
To learn how to read a tape measure to find 1/2 inch increments, locate the second-largest marks – they each correspond to 1/2 inch. To find 1/4 or 3/4 on a tape measure, locate the third-largest marks. They each correspond to 1/4 inch, with the longer 1/2 mark where the 2/4 inch mark would be.
What is the biggest mark on a tape measure?
On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them). As the increments decrease, so does the length of the mark. For example, ½" has a bigger mark than ¼" which has a bigger mark than ⅛", and so on.
What are the red marks on a tape measure for?
The red is for 16-inch-on-center spacing. The common framing spacing is for wall studs, floor joists and roof rafters. There will be red marks on the tape measure if you decide to space frame at 24 inch centers.
What are the numbers on a tape measure?
When referring to the diagram above you'll see a series of large numbers marked 1, 2, 3, and 4. These numbers sit next to long vertical marks which represent whole inches. Put simply 1 = 1", 2 = 2" and so on. Between those numbers are a series of shorter marks which represent fractions of an inch.
What are the red numbers on a tape measure UK?
The black numbers are inches and the red numbers are feet. TIP: There are 12 inches in a foot. Step 2: Identify the shorter marks Identify the shorter marks between the inch marks, divided into fractions of an inch.
How do I read a tape measure?
0:583:20How to Read a Tape Measure - REALLY EASY - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe can call these one quarter two quarters referred to as half an inch three quarters. And theMoreWe can call these one quarter two quarters referred to as half an inch three quarters. And the fourth quarter is the next inch every fraction on the tape measure has a preferred written form.
What is the purpose of the little black diamond on a tape measure?
The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers.” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.
How does tape measure age trick work?
1:152:47Find Your Age with a Tape Measure! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the way this works is you ask the person what year were you born and I was born in 1989. SoMoreSo the way this works is you ask the person what year were you born and I was born in 1989. So somebody asked me we would go to 1989. And then you'd turn it around and you'd see how old I am.
What is 19.2 on a tape measure?
The black diamond marks every 19.2" on our tape rule blades. This is for spacing of engineered joists common on job sites. The 19.2 inches allows for a break at 8 foot to accommodate full sheets of plywood.
How many 16ths are in an inch?
Determine the number of smaller units per unit of the larger quantity. In this case, there are 16 units of smaller quantity (1/16 inch) in one unit of the larger quantity.
What is the biggest mark on a tape measure?
On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them). As the increments decrease, so does the length of the mark. For example, ½" has a bigger mark than ¼" which has a bigger mark than ⅛", and so on. Read 1 inch.
What is a tape measure?
They are among the most common measuring tools used today. Generally speaking, the term “tape measure” refers to a roll-up, self-retracting style tape measure that’s designed for carpentry.
How to measure length?
Measure a length. Put the end of the measure at one end of the item or space you want to measure. When the length stops, take a reading on the tape measure. Find the length. In order to determine the length, you must add the lengths between inches together.
How to find the length of an inch?
In order to find the length, add the length of the inch (1) with the space between the second inch mark and the third. In this case, you’d add 1 inch + 1/4 inch to get 1¼ inch, or “one and a quarter inches. For a length less than 1 inch, simply read off the tape measure the length.
What is the red box on a tape measure?
The red box around the 16 is used in the construction of studs on a wall. Actually, the red box is marked on the tape measure every 16 inches, (16, 32, etc.) which assists in the construction of the studs in a wall.
What color are the markers on a tape measure?
Looking at the tape measure we always see markers in red. Some of them make sense and some of them don’t. We typically see the measurement increments of 16, 32, etc. on the tape measure.
How much does a tape measure move?
Actually it is intentional for it to move. When you measure and press the end of the tape measure against a surface it moves in 1/16th of an inch to ensure accuracy. Then when you pull on it to measure it moves out 1/16th of an inch to provide an accurate measurement.
How many marks are there on 1/4 inch tape measure?
For the 1/4 inch measurement, you will want to use the next smaller marks. There will be two marks which you will use in conjunction with the half for four quarters. Additionally as you use the inch numbers reflected on the tape measure you will notice typically a black or red box around every 12 inches.
What is the biggest mark on a tape measure?
Most tape measures use imperial (On Top) and metric measuring marks (On Bottom). The biggest mark is the inch mark with a number and then the next biggest mark is the half-inch (1/2 inch). The next smallest marks are quarters (1/4 inch), then down to eighth (1/8th) measurements. They also typically include red boxes for marking every 16 inches ...
How often should I use red tape for wood studs?
They also typically include red boxes for marking every 16 inches to assist in the construction of studs in a wall. Although there are a lot of different types of tape measures on the market today they all offer the simplest solution to measuring your wood project.
What is the black diamond on a tape measure?
What Are The Black Diamond On A Tape Measure. This is a question that is asked quite a bit. There are many marks on the tape measure and one of them is the black diamond. This is a specialty mark used to match the spacing for I-beam timbers (a substitute for solid material floor joists).
How many inches is a 16 foot tape measure?
A 16ft tape measure, for example, will have sixteen one-foot marks along its length and 192 one-inch marks (12 inches per foot). Each inch will then have eight 1/8th of an inch and sixteen 1/16th of an inch marks. 1 foot = 12 inches.
What is a hook on a tape measure?
The hook or 'tang' of the tape measure is the small, usually metallic component at the end of the blade. In pocket tapes (as seen in the image below), this is usually a straight piece of metal attached to the blade by a number of rivets. You will normally find (on any pocket tape of quality) that the hook 'floats'. In other words it moves in and out ever so slightly. Some people mistakenly think of this as a manufacturing defect but this is not the case.
Where do you put the hook when measuring?
When taking external measurements, however, the hook can be placed around/behind the object and pulled gently towards the measurer. Not only does this keep the blade in place whilst measuring, it also guarantees an accurate measurement by compensating for the thickness of the metal hook in the measurement.
When taking internal measurements, the hook can be pushed against the object?
skirting board) providing an accurate measurement .
Do you need safety glasses for tape measure?
All manufacturers recommend that users make use of safety glasses/goggles when doing any work that requires a tape measure for exactly this reason. What's more, some tape measures (regardless of expense or quality) can feature steel blades with relatively sharp edges.
