The Parts of a Lamp Shade
- Lampshade Frame Forms the Shape. The frame of the average lampshade is exactly what it sounds like: the metal framework...
- Lampshade Fabric Adds Style. The fabric on a lampshade is the material visible on the outside of the shade. According to...
- The Lampshade Lining Affects the Light. The lining is the material used inside the lampshade; it's...
What are the different parts of a lamp?
- Weight: Body: 5.7 kg, Bottle: 19 kg, Total: 24.7 kg
- Product size: Height: 152 cm (59.84 inches) 5ft, Width: 54 cm (21.26 inches), Depth: 48 cm (18.90 inches),
- Diameter: 61 cm (24.02 inches)
- Power: Mains power
- Materials: Polished Laser Cut & Spun Aluminium – Borosilicate Glass Bottle – Mathmos lava formula
What are the components of a lamp?
Parts of a Table Lamp (top to bottom):
- Lock: Locks the lampshade in place.
- Lampshade fitting: structural frame for the lampshade.
- Lampshade: Softens the light.
- Bulb: Provide the light.
- Harp: Vertical shade support and shade attachment into the socket.
- Socket shell: light socket for bulb.
- Insulation sleeve: Secures socket shell to the switch and base.
- Switch: Turns light on and off.
What are the parts of a standing lamp?
- Table lamp anatomy;
- Floor lamp anatomy;
- Lampshade styles; and
- Lampshade fittings.
What are the parts of a fluorescent lamp?
- Ballast
- Ignitor (or Filament)
- Starter
What are the parts of a lampshade?
Where does the spider attach to a lamp?
About this website
What are the different parts of a lamp shade?
The Parts of a Lamp ShadeLampshade Frame Forms the Shape.Lampshade Fabric Adds Style.The Lampshade Lining Affects the Light.The Fitter Matters Most.
What is the thing that holds a lampshade in place?
Finials are decorative caps that fit over shades at the top of a lamp. They help secure the lampshade in place and complete the lamp aesthetics.
What is the piece called that holds a lamp shade on a lamp?
A lamp harp is the component of a lamp to which the lamp shade is attached. It typically comes in two separate parts, a saddle which is fastened under the lamp socket, and the harp itself which consist of a lightweight frame attached to the saddle at its lower end and extending upwards to a point above the bulb.
What is a shade Gimble?
Shade carrier or gimbal. A shade carrier (otherwise know as a gimbal or gimble) is used to connect a lampshade to a lamp holder (the bit on the base or lamp stand that holds the lampshade and bulb in place).
7 Types Of Lampshade Fitters (With Photos) – Upgraded Home
The three main types of lamp shade fitters are UNO, spider, and clip-on. However, there are variations of also each of these options. Continue reading to understand the different types of lamp shade fitters and help determine which fitter type you need for your specific purposes.
Lampshade Terminology – A Beginner’s Guide
If you’re buying a lampshade, it’s important you know what all of the terminology is referring to. Whether it’s the fringe to the fitter, there are quite a few different terms used to describe lampshades that you won’t have heard before, or that have a different meaning when it comes to lampshades.
What are the parts of a table lamp?
Parts of a Table Lamp (top to bottom): 1 Lock: Locks the lampshade in place. 2 Lampshade fitting: structural frame for the lampshade. 3 Lampshade: Softens the light. 4 Bulb: Provide the light. 5 Harp: Vertical shade support and shade attachment into the socket. 6 Socket shell: light socket for bulb. 7 Insulation sleeve: Secures socket shell to the switch and base. 8 Switch: Turns light on and off. 9 Base: Lighting element base that attaches to the lamp body. 10 Threaded tube: Attaches lighting components to the lamp body. 11 Body: Aesthetic design/body of the lower part of the lamp. 12 Plug: Conduit for electricity to power lightbulb. 13 Lamp base: base/foundation for body. 14 Anti-slip material: Can be felt or rubber to keep lamp in place on surface.
What is a husk lamp?
Husk: Attaches poll to floor lamp base. Base: Usually fairly heavy and wide (in relation to lamp poll) to anchor floor lamp and keep it upright. See our types of floor lamps for more information.
Do you have to consider the type of lightbulb when choosing a lamp?
Lamp bulbs and various parts of lamps are no exception. Therefore, while the design of a lamp is very important when choosing a lamp for any room, you also want to consider the type of lightbulb and hence the type of light it gives off. Perhaps you like all your home lighting to have a particular type of bulb or light.
What is a floor lamp shade?
Floor-Lamp lamp shades. Floor lamps typically require a slightly larger shade than table lamps. Also due to the height of the lamp, they tend to look better with a drum or floor-style shade. A floor shade is almost a drum shade, except the sides are slightly slanted.
How many sides does a hexagon lamp shade have?
Unusual-shaped shades include Hexagon and Octagon Lampshades, with 6 or 8 flat sides. A little more extreme than simply a cut-cornered square shade, these shades feature equal-length edges around the top and bottom of the shade.
How does the shade of a lamp affect the light?
The correct shade greatly affects the kind of light the lamp gives off, as well as where that light is directed . Different types of lamp shades correlate to different functions for practical purposes, be it sitting nearby, at a distance, or as an ambient light source.
How big should a lamp shade be for a floor lamp?
Measuring lamp shades for floor lamps. Floor lamps take a shade with a bottom diameter of 16" or 18" or larger . Similar rules apply as for table lamp shades, where the shade needs to be tall enough to cover the hardware so that you don't see the lamp socket or fitter from the side.
How high should a lamp shade be?
A good height for lamp shades for table lamps is about 3/4 of the width of the shade, or 3/4 the height of the base up to the socket.
What is reflective lining?
A reflective lining such as gold or silver helps to reflect light away from the shade surface and focuses it out of the top and bottom. This keeps the outer appearance of the shade the same color and tone as when the light is off. This is useful for dark or black shades that you want to stay dark-looking even when the lamp is on. It also prevents the shade from absorbing some of the light, increasing overall light output. A reflective lining also hides the appearance of a bright-spot from the light bulb, as seen through the shade. Other types of lining include plastic, linen and other fabrics, each with its own degree of diffusing and reflecting light. Some linings allow some light through while also increasing the output through the top and bottom of the shade.
What is the difference between a cylinder shade and a drum shade?
Drum shades tend to be wider and cylinder shades tend to be taller. In some cases the difference between them is hard to distinguish - a tall drum shade may be similar to a short cylinder shade.
What is the base of a lamp?
Base – this is the bottom part of the lamp, which holds the shade and bulb. On floor lamps it’s usually wide and flat, to support the height of the lamp. Braid – on lampshades, the braid is a fabric decoration that usually sits around the top and bottom, but also around the edge of any scallops or crowns on more unusual frames.
What is drop in lampshade?
Drop – the distance between the top of the lampshade and the fitter, or the distance between the bottom of the lampshade and the fitter. Fitter – a metal frame that attaches the lampshade to the lamp. The most common types of fitter are as follows: Washer – a small circle with three arms reaching out to the top of the lampshade.
How to tell if a lampshade is a scallop?
It’s identified by the bottom of the lampshade appearing like a scallop, with a series of curved endings forming its base. A double scallop lampshade has two of these rims, while a single scallop has one.
What is a hard back lamp?
Hardback – a lampshade which has a hard backing on the inside. It’s applied to the fabric during production and helps maintain the shape of the lampshade over time. Lining – this is an additional layer beneath the outer lampshade, on the inside. It’s added to a lampshade to make it more opaque.
What is the phone number for lampshade repair?
For more information on this service, our lampshade repair service, or any of our products, give our friendly team of lampshade experts a call on 01204 414 366.
What is the fun part of choosing a lamp shade?
The fun part is choosing your lamp shade that matches your taste. Because lamp shades come in all shapes, sizes, styles, colors, materials and textures, picking the right one can be a bit of a challenge. There’s a lot more that goes into lamp shades than you might think at first. So we put this guide together to help you through the process.
How to determine the shape of a lamp shade?
The shape of the shade— bell, coolie, drum, empire, hexagon , square (see diagram)—is usually determined by the size and shape of the lamp base . While there is no simple formula for fitting shades to floor lamps, there is one for table lamps: The height of the shade = 2/3 the height of the base; width of the shade = 1/2 inch wider on each side ...
How to tell if a lamp shade is large enough?
The crucial information you need to obtain in order to determine if the shade is large enough for the bulb strength you are going to use is the “critical radius” or measurement taken from the middle of the light bulb to the inside edge of the lamp shade (see diagram).
Why is the shade on a lamp longer?
on an upper shelf), the longer the shade must be because otherwise the bulb and assembly will be in view.
Why use dark colored shade for lamp?
For example, if the purpose of the lamp is to provide accent lighting or to create a diffused effect, then a dark-colored shade of a dense material is ideal because it will project light from the top and bottom but not much through the shade itself.
What is the cardinal rule for lamp shade size?
The cardinal rule of lamp shade size and placement, according to our own Ron Leddusire, Senior Designer at Destination Lighting, is, “Never let the hardware show at eye-level.”.
How wide is a lamp shade?
The height of the shade = 2/3 the height of the base; width of the shade = 1/2 inch wider on each side than the widest point in the base. Shade surface—the material the lamp shade is made of—is a little trickier, as that decision is based on both function and room decor.
What are bracket lamps made of?
Brackets can be made of brass, bronze, cast iron, etc. Founts can be either metal or glass. Many bracket lamps feature reflectors mounted behind the lamp to increase the light output. Bruise -- Usually an arc- or star-shaped area of damage with the piece of glass still intact.
What is a globe lamp?
Globe -- A term often used to describe a lamp shade, particularly a ball shade. Also to describe the lamp glass used in a lantern. Gone With The Wind Lamp -- Generally a vase or parlor lamp with a removable fount and matching painted or embossed decoration on both the lamp base and shade. Top of Page H Index.
What is an astral lamp?
Astral -- A lamp style employing an Argand burner and characterized by air intake holes near the base of the fount. Usually all metal lamps with pear-shaped founts and bases that often include marble or other stone. Top of Page B Index. Base -- The bottom portion of a lamp, or foot, upon which the lamp rests.
What is a leveler lamp?
Most often carried from place to place, thus of fairly rugged construction. Leveler -- A device used on a hanging lamp to keep the lamp hanging level. Often a spreader that pivots in the center.
What is a bruised lamp?
Bruises usually result from an impact of substantial force, such as the article being dropped. Burner -- The apparatus of a lamp that "produces" the flame. Usually consists of a metal enclosure, a wick to supply the (liquid) fuel, and a series of holes to provide air for combustion, and a method of adjusting the wick.
What is a composite lamp?
Collar -- The metal ring or band, usually threaded, that allows the lamp burner to be attached to the lamp fount. Composite -- A term used to describe a lamp comprised of more than one part or material.
What causes a crack in a lamp handle?
Can be heavy wire, cast iron, or brass. Heat Check -- A crack that is caused, in the case of lamps, when stress is created in the body of the object when the handle is applied. This occurs when the body of the lamp is cooler than the gather of glass used to form the handle or finger ring.
What are the parts of a lampshade?
Lampshade parts include a spider, fitter and a harp and finial. These parts work together to affix the lampshade to the lamp base. The outside of a lampshade can be made of fabric, glass, metal or paper. Advertisement.
Where does the spider attach to a lamp?
The spider attaches to the inside top rim of the lamp shade and connects to the lamp base either with a harp and finial, a clip that slides directly over the light bulb, or an uno fitter, which screws onto threads on the lamp's socket.
