What is the standard size piece of vinyl siding?
Standard sidings are usually 12' to 12-1/2' long. With standard siding panels, seams appear every two to three feet. Longer length sidings are typically offered in 16'8”, 20' and 25' ranges. The primary benefit of a longer length siding panel is that it reduces the number of seams on the wall.
What is the widest vinyl siding available?
Also called barn siding, board and batten siding is the widest of all, with planks of up to 12 inches wide. The boards are installed either vertically or horizontally, with narrow strips of wood nailed over the gap between the boards.
What is the depth of vinyl siding?
0.035 inchesFor most sidings in the United States, a quality vinyl siding is required to have a thickness of 0.035 inches but if you are looking for more durable and long-lasting sidings then they usually range 0.4 inches onwards.Nov 28, 2019
How wide is a strip of siding?
Furring/Furring Strip: usually a wood 1” x 2” (25.4mm x 50.8mm) strip used to even a surface in preparation for installing vinyl siding.
Are there different widths of vinyl siding?
As a rule of thumb, vinyl siding usually comes in the following widths: 4”, 5”, 6”, 7”.
What is the most popular type of vinyl siding?
Horizontal vinyl is also cheaper and easier to install that either vertical or shake. Also known as clapboard or lap siding, it is one of the most popular types of siding sold today. It is a long narrow board or panel that is placed horizontally across the house.
What is the difference between standard and premium vinyl siding?
Standard & Premium Vinyl Siding Standard and premium vinyl siding may appear similar, but premium vinyl siding is thicker with enhanced nailing hems that make it stiffer and easier to install. Premium panels also have larger profiles that create deeper shadow lines, enhancing the overall appearance.
What kind of insulation should I use under vinyl siding?
Using exterior rigid foam board insulation is a great way to make a building more energy efficient, quieter and more likely to prevent moisture infiltration problems. The method works for both new construction and remodeling and doesn't affect siding and trim details very much.
Are there different grades of vinyl siding?
The thickness of each siding varies depending on the grade of the siding. In most cases, homeowners prefer the super-thick grade siding which is around 0.50 thick as it gives a good balance between the price and the amount of durability that you can get.Nov 28, 2019
Do you need starter strip for vinyl siding?
4:155:30Vinyl Siding Installation - Getting Started - 2018 - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor backed siding the starter strip must be spaced away from the wall to accommodate the thicknessMoreFor backed siding the starter strip must be spaced away from the wall to accommodate the thickness of the backing on the siding.
What are the two types of vinyl siding?
The three main types of vinyl siding are horizontal, vertical, and architectural. Clapboard horizontal siding: This is the most common type of vinyl siding and it looks like straight horizontal pieces of wood overlapping each other.
How long is a piece of starter strip for vinyl siding?
105.5" longOur Vinyl Starter Strip is universal for all Foundry Shake and Shingle siding profiles. Available in cartons of 20 pieces. Each piece is 105.5" long.
How is vinyl siding sized?
Similar to other siding products, vinyl is sized by width and length. However, the overall width of a vinyl siding panel may also include the additional width of the nailing hem used to attach the panel to the exterior surface and the interlocking edge detail used to link panels together. When purchasing vinyl siding, it is important to verify the "exposed" width of the siding. The exposed dimension stated on the siding's technical specification sheet is the width that is viewed after installation. Nailing hems and interlocking details usually hide under or interlock with the panels around them, which prevents them from being exposed.
How wide is vertical vinyl siding?
A double, 5-inch vertical vinyl panel would indicate two, 5-inch on center planks per panel with an overall panel width of 10 inches. Some manufacturers may refer to the panel's total exposure instead of the panel's total width. Standard vertical panel lengths are 12 feet.
How wide is a 3 inch vinyl panel?
The triple 3-inch lap panel would have an overall width of 9 inches plus its nailing hem and interlocking detail. Overall, horizontal panel sizes typically run between 6 and 10 inches in width. Standard length for horizontal vinyl siding panels is 12 feet. Advertisement.
How many laps are in a 4 inch vinyl siding panel?
For example, a 4-inch lap panel usually contains two laps and is referred to as a "double, 4- inch lap panel.". A vinyl siding product referred to as a "triple, 3-inch lap panel" would indicate three, 3-inch-wide laps.
What is vinyl siding?
Vinyl siding offers a low-maintenance alternative to traditional wood siding and a decorative way to protect the exterior of your home. Measuring the height and width of the home's exterior walls helps the installer decide upon the appropriate sizes of vinyl siding to purchase.
What is horizontal siding?
Horizontal siding is used to create various siding styles such as clapboard and Dutch lap. Horizontal lap siding is often referred to by the size or width of a single lap board. For example, 4-inch lap would indicate a 4-inch-wide plank. The lap is created as a panel that includes two or three of the lap planks, however.
Can you use longer lengths on vinyl siding?
Seams in vinyl siding installations can be avoided by specifying longer panel lengths. Manufacturers do not typically offer longer lengths in standard vinyl siding sizes. Custom lengths can be requested, but some manufacturers may require installers to purchase a specific number of panels to justify making the longer panel sizes.
Siding dimensions chart
All numbers in the chart are approximate measurements of typical siding panels, boards and sheets. For exact dimensions check manufacturer specifications of a certain product.
How heavy the siding is?
Weight of a siding will depend on the material type siding made of and its thickness. One 10” x 12’ vinyl siding panel will weight approximately 4.5 – 4.7 pound (2.04 - 2.13 kilograms). Bevel or lap engineered wood siding is a few times heavier. Each square foot of stone veneer siding weight 8 – 12 lbs. (3.6 - 5.4 kg).
Estimating siding coverage area
While calculating how many siding panels or sheets you need for a house always round to a bigger number and depending on house style and siding design add 10% - 12% for a waste.
How big is a square of siding?
One unit of siding (one square ) is equal to 100 square feet, so knowing how to measure in square feet for siding is key to a successful estimate.
How do you measure a square for vinyl siding?
Start by measuring the height and width of each wall of the building. Multiply each length and height measurement to find the square footage of each wall, then add them together to find the total square footage. Divide the total by 100 to find the number of squares of vinyl siding to order.
How many pieces of vinyl siding are in a square?
The length and width of the vinyl determine the number of pieces in a box. A carton of siding contains between 14 and 24 pieces and will cover 100 ft² or 200 ft².
How much does it cost to vinyl side A 1500 square foot house?
Vinyl Siding Cost for 1,500 Sq. On average, it costs between $3,500 to $20,100 to install vinyl siding on a 1,500 square foot house with one story.
How many square feet is a box of soffit?
a box a soffit panels =2 square, which would give you approximately 200 1 ft. pieces. a box a soffit panels =2 square, which would give you approximately 200 1 ft.
How much does a square of vinyl siding cost?
The cost for vinyl siding is usually around $3.50 per square foot. A high quality vinyl siding would increase the price and you could expect to pay as much as $7 per square foot. It is smart to use a siding installation cost calculator like above to get an estimate of what you’ll spend.
How much does a box of vinyl siding cost?
Vinyl siding cost by box The standard box of vinyl siding contains 24 pieces, with each measuring 4 inches by 150 inches. One box of vinyl siding is enough to cover 100 square feet, and it costs around $160 per box, on average.
How do I know what size vinyl siding I have?
The size of the panel is usually the most important factor. When matching vinyl siding, one needs to measure from the bottom of the panel to the first “lap”. This measurement will typically be 4, 4.5 or 5 inches. There are 2 laps, giving the appearance of 2 boards per each individual panel.
How is J Channel vinyl siding measured?
the length of starter strip equals the width of the wall (the bottom part), the length of j – channels equals twice the height of the wall, and the width plus twice the height of all windows and doors.
How Do You Measure J trim?
Measuring. J channel siding will need to be measured accurately to allow for proper installation. The measurement is taken from around the door or window, or on the corner it is being installed. Measure from the outside of the existing trim for the best fit.
How much does it cost to vinyl side A 1500 square foot house?
Vinyl Siding Cost for 1,500 Sq. On average, it costs between $3,500 to $20,100 to install vinyl siding on a 1,500 square foot house with one story.
How many pieces of siding are in a 2 square box?
The number of pieces of vinyl siding in a box depends on the width and length of the pieces. A carton typically contains between 14 and 24 panels and covers 100 ft² or 200 ft², or 1 or 2 squares, and will cost from $90 to $250 a square.
How many square feet does a box of vinyl siding cover?
Box of Vinyl Siding Cost A box of vinyl siding costs $160. It contains 24 pieces of siding of 4 inches by 150 inches, which is enough to cover 100 square feet.
How much siding do I need for a 1600 sq ft house?
The average cost to install vinyl siding on a 1,600 sq. ft. home is $4,800–$5,600, or $3.30 per square foot installed depending on the size of your home, quality of siding, and the number of accent pieces. Higher-quality siding on the same house will cost between $10,200 and $11,100 or $6.70 per square foot.
What Is Vinyl Siding?
During the first half of the 20th century, constructors only used wood and aluminum sidings to cover the parts of houses, buildings, and warehouses. That was a way to protect them from harsh weather conditions.
Vinyl Siding Advantages
Like any other siding, the first reason to pick out this option is your home’s more appealing exterior. It is a cheap way to cover the imperfections of the walls and hide any possible flaws on their surface.
Correct Vinyl Siding Size
You should consider three vinyl siding size types, including length, width, and thickness. All of them determine the final product features.
4 Inches vs. 5 Inches Vinyl Siding
Generally speaking, there are not many differences between 4 inches (10 cm) and 5 inches (13 cm) vinyl sidings, and the choice depends on your preferences. You should pick the type that is more appealing to your eye and more suitable for your style.
Dutch Lap and Clapboard Vinyl Siding Styles
Nowadays, D4 and D5 are popular in two styles, Dutch Lap and Clapboard.
Vinyl Siding Compared to Other Options
For ages, people used wooden planks and wooden sidings to protect their homes. This material is too expensive, difficult to clean, and not having a long life span when maintained inappropriately. Therefore, vinyl siding replaced it quickly in many American homes.
Summary
As you can see, the differences between 4 inches (10 cm) and 5 inches (13 cm) vinyl sidings are minimal. You can easily decide by looking at the pattern or color as there is no significant difference in installation, endurance, purpose, and price.
What are the features of vinyl siding?
As you talk to your siding contractor, you will probably discuss features of vinyl siding including the following: Width. Thickness. Profile and Texture. Price.
What is the texture of siding?
The texture of siding refers to any apparent pattern on the surface of the plank. For example, the texture may resemble wood grain or be smooth. The profile refers to the different ways in which the panels are hung and the overall look of the finished product.
What is beaded seam siding?
When siding planks were handmade, this was a very expensive feature and only found on very upscale homes. Beaded seam has a very clean look , and is great for traditional homes.
What is lap siding?
Clapboard siding was first used in the U.S. in Colonial times, and is a traditional method of siding a house. It was used on some of the most historic homes in the country. It is often called lap siding or horizontal siding. Clapboard siding is designed with long, narrow boards of around 4”.
What does staggered edge siding look like?
Staggered-edge siding looks like hand-split shingles, much like cedar shakes. With shingle siding, the individual shingles are installed and the overall look shows complex shadow lines. Vinyl siding made with staggered-edge may be manufactured in panels.
What is fish scale siding?
Sometimes called “fish scale” siding, these are half-round shingles that create a picturesque look. They are especially nice in gables. The scallops are historic looking, and look great with a low gloss finish. Vinyl siding is available in this profile.
What is a mounting hem on siding?
All siding has a mounting hem. This is the strip where nails or screws are used to attach the siding. You will find that a double-layer mounting hem will provide more stability for the siding. It will hold it more securely in high winds.
What is the width of vinyl siding?
As a rule of thumb, vinyl siding usually comes in the following widths: 4”, 5”, 6”, 7”.
What is a vinyl board?
This is a style and pattern that has often been used on barns and similar structures. Essentially these are vinyl boards that mirror traditional wood siding – in the wood siding there are wide planks installed with narrow strips of wood in the space between the wider planks.
What is log siding?
Just as the name implies, log vinyl siding is manufactured in such a way as to mirror and reflect the same design that would be found in a log cabin. One of the chief benefits of this sort of vinyl siding is that you get the same overall appearance as the traditional log cabin without any of the maintenance needs.
What is wood grain siding?
Wood Grain. This is a type of vinyl siding that has been stamped in such a way as to imitate natural wood grain patterns. This can yield a very warm and comforting feeling in that we as humans have been using wood in our building for centuries and have become quite familiar with its appearance.
Is smooth vinyl siding a modernist style?
The stereotypical understanding of vinyl siding – smooth vinyl siding has no dimension or texture on its surface. This can provide a very architectural, contemporary look and would be a good option for those who enjoy the Modernist aesthetic.
What is vinyl siding profile?
Vinyl Siding Profiles. When people talk about vinyl siding profiles, they are referring to the way the long narrow planks or panels look. Some are wide, some are narrow, some have groves cut into them, some don't. Some are rough like fresh cut cedar logs, and some are exceptionally smooth like freshly painted sanded wooden planks.
What is the best siding for a house?
Hardie Board Siding. Hardie Board is one of the most popular types of home siding today. Much stronger than vinyl siding it is a excellent alternative to both real wood and vinyl siding. It comes in all popular styles, many different colors and factory primed for custom coloring. Hardy Board.
What type of siding is used on the front of a garage?
Board and batten siding is used here on the front of the garage. Note siding is running up and down or vertically. Also note homeowner used a different type of siding, cedar shake, on the gable of the main house. Vinyl allows you to mix and match different types, styles, colors and textures to create any look you want.
What is board and batten siding?
All the boards run up and down. Board and Batten Siding is a type of siding where long wooden boards are installed top to bottom of the house or 'vertically'. Where the boards come together a small several inch wooden 'batten' is nailed over the crack between the two boards. Hence the name, 'board and batten'.
