What is the standard height of a water heater?
They usually store between 30 and 50 gallons of water but can hold as low as 10 gallons. Taller water heaters can be exorbitantly different. They can have a height that ranges anywhere between 46 and 60 inches tall and a diameter between 18 and 21 inches wide. They are more cylindrical than the shorter variety, which has a more diverse shape range.
How tall is a tall water heater?
What Is a Tall Water Heater? As its name says, tall water heaters are indeed tall. They are made to be around 50 to 76 inches in height and will be able to hold up to 100 gallons of water. Ideally, they’re installed in your basement or garage – wherever they can be close to your home’s plumbing system.
How big is a residential water heater?
Capacity: Standard residential tank water heaters can range in size and capacity. Tank water heaters range from 20- to 80-gallon capacities. Capacity is all about being sure your hot water heater can meet the needs of your home.
How high to raise water heater above floor?
The Uniform Plumbing Code, which establishes standards nationwide, says that the flame or sparking mechanism in a gas water heater must be at least 18 inches off the ground. This means that an accurate measurement for proper installation is not based on the distance from the bottom of the water heater to the floor.
How tall is a standard water heater?
Tall water heaters installed in homes range in height from 46 to about 60 inches. They have cylinder shapes that range in diameter from 18 to around 21 inches, and typically store anywhere from 30 to 100 gallons of water.
How tall is a 50 gallon water heater?
A 50-gallon American Standard water heater has a height of 57.75 inches and a diameter of 20.31 inches. American Standard water heaters are reliable and have a lot of value.
How tall is a 40 gallon tall water heater?
20.25 in Product Height (in.) 58.875 in Product Width (in.) 20.25 in.
Does water heater height matter?
Short water heaters vary between 30 to 49 inches and hold up to 50 gallons of water. The nickname for tall water heaters is “short boy.” Tall water heaters range from 50 to 76 inches and can hold up to 100 gallons of water. They're ideal for basements or garages where height isn't an issue.
Which is better short or tall water heater?
Short water heaters are generally more energy-efficient as they have a lower power rating. They also heat the cold water faster and recover than tall ones due to the lower water volume in the storage tank. This is important when trying to save money.
How tall is a 50 gallon Rheem gas water heater?
The Rheem Performance Platinum Gas Water Heater (50 Gallon) has an overall height of 50.5” (128.3 cm) and diameter of 23.75” (60.3 cm).
How tall is a state 40 gallon water heater?
Frequently Purchased With...Brand:State IndustriesCollection:ProLineDimensions:51.5 in X 22 inFuel Type:Natural GasHeight:51.55 more rows
How tall is a 40 gallon gas hot water heater?
58.25"Smith® 40-Gallon Tall Natural Gas Water Heater 18" D x 61-3/4" H | HD Supply....About this item.Assembled DimensionsProduct Depth18"Product Height58.25"Product Weight130 LbProduct Width18"1 more row
How tall is a 40 gallon Rheem hot water heater?
58.5 inCompare Similar Gas Tank Water Heaterscurrent product Best SellerTop RatedApplication TypeResidentialResidentialWater Heater ProfileTallTallVent TypeAtmosphericAtmosphericProduct Height (in.)58.5 in60.25 in9 more rows
Can gas hot water heater sit on concrete floor?
Gas water heaters can sit directly on the floor if they are FVIR(flammable vapor ignition-resistant).
How tall is a 30 gallon water heater?
46 1/2"Product DimensionsType:TallHeight:46 1/2"Diameter:19"Width:19"Depth:19"1 more row
How high should a gas water heater be off the ground?
How high should my gas water heater be off the ground? Your gas water heater should be 18 inches off of the ground, as per the National Fuel Gas Code. This is the standard for water heater installation requirements.
Does a basement water heater need to be 18 inches?
Basement water heater installation doesn’t require an 18-inch elevation, but it certainly can’t hurt. This rule is in place for the safety of you and your family, to help prevent fires and even explosions in the event that a flammable substance is spilled near your gas heater. These rules are part of the Uniform Plumbing Code, ...
How far off the ground should a water heater be?
The Uniform Plumbing Code, which establishes standards nationwide, says that the flame or sparking mechanism in a gas water heater must be at least 18 inches off the ground. This means that an accurate measurement for proper installation is not based on the distance from the bottom of the water heater to the floor. Instead, it is based on the distance from the pilot or lighting mechanism to the ground. Codes vary by city and county and may be more strict than national standards, so check with your local officials prior to installation. In addition, some newer models of gas water heaters have combustion chambers that are completely sealed, eliminating the need for space between the ground and the ignition mechanism. In many cases, however, building codes have not caught up with this new technology and still require a minimum distance to the ground.
Why is the minimum distance required for a water heater?
For example, the minimum distance from the ground is intended to prevent fires and explosions in case a flammable substance is spilled on the floor near the water heater.
Do gas water heaters have combustion chambers?
In addition, some newer models of gas water heaters have combustion chambers that are completely sealed, eliminating the need for space between the ground and the ignition mechanism. In many cases, however, building codes have not caught up with this new technology and still require a minimum distance to the ground. av-override.
How tall is a water heater?
Tall. Tall water heaters installed in homes range in height from 46 to about 60 inches. They have cylinder shapes that range in diameter from 18 to around 21 inches, and typically store anywhere from 30 to 100 gallons of water. The nickname for tall water heaters is "tall boy.".
How wide is a water heater tank?
They have wide and round tanks that range in diameter from 20 to 26 inches. The nickname for short water heaters is "low boy.". They often installed in homes that have a crawlspace instead of a basement or inside of a closet inside the home or the garage or attic.
What kind of water heaters work with propane?
Short and tall water heaters work with natural gas, propane or electricity and can also store water for solar water heating systems or work with a heat pump system that works in conjunction with the heating and cooling system for a home. While the plumbing height can be adjusted for either a short or tall water heater, ...
How much water does a short water heater store?
Most short water heaters used for "whole home" water heating store anywhere from 30 to 50 gallons of water. However, there are short water heaters that store as little as 10 gallons of water. Advertisement.
What is the third place water heater?
Next to heating, cooling and refrigeration, your water heater comes in third place in terms of energy use and costs. As a general rule, you should take an "if it ain't broke, don't fix it" approach in selecting a tall or short water heater.
Can you adjust the height of a water heater?
While the plumbing height can be adjusted for either a short or tall water heater, it is a best practice to install the pipes vertically for faster delivery of hot water through the plumbing system and into the faucets of rooms. Advertisement.
Do you have to raise the ignition on a water heater?
And even then, the code is that the ignition mechanism is what needs to be raised. If your water heater is electric or a heat pump, no need to raise it per code. But if you WANT to raise it then you certainly can, though building something is likely overkill.
Do you raise the water heater code?
Water heaters only need to be raised (per code) if they are using an ignitable fuel source (gas, propane, etc). And even then, the code is that the ignition mechanism is what needs to be raised. If your water heater is electric or a heat pump, no need to raise it per code. But if you WANT to raise it then you certainly can, ...