Insert the metal end of the VersaPak battery into the charger. The indicator lights on the four) are being charged. When the flashing light glows steadily, the battery or batteries are fully charged. Maintenance charge safely keeps batteries fully charged and ready to use. To extend battery life, leave battery in charger until ready for use.
Full Answer
How long do you charge VersaPak batteries?
For charger model VP130: The Silver VersaPak battery requires only 6 hours to charge initially and 3 to 6 hours to recharge. Additionally, you can leave the batteries in the charger indefinitely without harming your batteries.
How long does it take for a Black and Decker VersaPak to charge?
Charging the Silver VersaPak The standard VersaPak battery, the silver form, employs nickel cadmium chemistry. Using the Black & Decker VP130 or VP131 battery chargers, this battery requires an initial charge of six hours. Recharging varies between three and six hours.
How long to charge Black and Decker 40v?
Product Description The BLACK+DECKER LCS40 MAX Fast Charger, 40-volt is designed to charges BLACK+DECKER 36v or 40v Max batteries in under 2 hours. This unit charges LBX36 in 1 hour, LBXR36 in 1.5 Hours, and LBXR2036 in 2 hours. The charge indication light lets you know when your battery is charged!
How do you revive a versapak battery?
Here is how it's done:Step 1: Fully Charge the Battery. Use the factory power charger to fully charge your NiCad or NiMH batteries. ... Step 2: Fully Discharge the Battery. Next, insert your battery into a tool, and put it into heavy use until it fully discharges. ... Step 3: Repeat.
How long does a Black and Decker battery charge?
Instead I bought a Black & Decker L2ACF-OPE 20V MAX Lithium Ion Fast Charger. It averages around 30-minutes per battery. Some units are even faster and will charge two batteries at a time. Depending on your needs, you can check into those too The battery is fine as is the charger I ordered for it.
How long does it take to charge a 40V battery?
A Ryobi 40V, 4-amp battery can take up to one hour to recharge for each 25-percent increment, requiring as long a 4-hours to completely recharge a discharged battery.
How long does Black and Decker 40V battery last?
The batteries take a long time to charge and only last about 20 minutes when in use. It takes two days to mow my lawn.
How long does it take to charge a Black and Decker 20v lithium battery?
Charges the LBXR20 (1.5Ah battery) in 45 minutes or less.
How to carry a charger?
carry charger by cord or yank it to disconnect from receptacle. Keep charger cord from heat,
What countries use Versapak?
Australia and New Zealand VersaPak users. Please refer to your charger and product
What is included in the VP132 starter kit?
Starter kits: VP132 includes a VP130 two-port charger and one VP100 VersaPak battery.
How to extend battery life?
To extend battery life, leave battery in charger until ready for use . A rapid flash indicates that the battery no longer accepts a charge and should be. recycled in accordance with the information in the "RBRC Seal" section. NOTE: Your VersaPak battery was sent from the factory in an uncharged condition.
How long does it take to charge a nickel battery?
Before attempting to use it for the first time, it must be charged for 1 hour per battery up to. 4 hours for conventional nickel cadmium (silver) batteries and 1 1/2 hours per battery up to. 6 hours for nickel metal hydride (gold) batteries. Subsequent charging for most fix-up jobs. will require less time.
How long does a battery last in silver?
silver labeled and 6-9 hours for gold labeled batteries.
What are the safety precautions when using electric tools?
• Do not store or carry battery so that metal objects can contact exposed metal end shown.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Product Description
PowerGiant is specialized in designing and manufacturing varieties of power tool batteries and chargers for over 18 years. We are constantly devoted to providing our customers with high quality, safe and reliable, affordable items. All PowerGiant products comply with FCC, RoHS and CE security testing standards.
Important information
There was a problem filtering reviews right now. Please try again later.
How to take apart Verapak battery?
Step 1: Taking the Battery Apart. You will need to take apart the Verapak battery. Start at the end with the black plastic end piece. It is very hard to get off. I used a razor blade to cut a vertical slit to put my small flat head screwdriver in to pry it off. Try not to deform the plastic because we still need it.
What to do if screwdriver isn't working?
If the screwdriver isn't working, use a putty knife or pocket knife. Now you can start cutting out a large slot like you see in the picture. Make it wide enough so you can fit the battery holders. Make sure the battery holders are set in deep enough with a battery installed.
How to carry a charger?
carry charger by cord or yank it to disconnect from receptacle. Keep charger cord from heat,
What countries use Versapak?
Australia and New Zealand VersaPak users. Please refer to your charger and product
What is included in the VP132 starter kit?
Starter kits: VP132 includes a VP130 two-port charger and one VP100 VersaPak battery.
How long does it take for a gold battery to charge?
gold labeled) batteries. Subsequent charging for most fix up jobs will require 3-6 hours for
Where to take a damaged Black and Decker?
damaged in any way; take it to a qualified Black & Decker service center.
Is continuous charging safe?
charger. Continuous charging is not a safety concern.
Can you charge batteries with a Versapak charger?
Charge batteries only with VersaPak battery charger.
What type of batteries are used in a Versapak?
The VersaPak system uses stick-type 3.6-volt nickel-cadmium (Ni-Cad) or nickel metal hydride (NiMH) batteries. Ni-Cad batteries are an older design; NiMH are an improved form that contains no dangerous cadmium and offers certain performance advantages. As other battery systems came into vogue, especially lithium-ion, the VersaPak tool systems became somewhat obsolete. But there are millions of drills, drill-drivers and other hand power tools still in operation that use the 3.6-volt VersaPak batteries, so the demand for replacement batteries is still strong. Also strong is the wish to recondition existing batteries, if possible.
How to charge a NiMH battery?
Step 1: Fully Charge the Battery. Use the factory power charger to fully charge your NiCad or NiMH batteries. Image Credit: Power Tool Express. Place your NiCad or NiMH batteries in their charger, and allow them to charge for at least twice the time they normally charge. Advertisement.
How many times should I charge a NiMH battery?
Repeat this charge/discharge cycle three to five times to get the full capacity of your Ni-Cad and NiMH batteries back. You will likely notice a distinct difference after two cycles, but continue to charge and discharge several more times to get the full benefit of this restoration method. If the battery refuses to hold a charge even after this repeated cycling, it needs to be discarded and replaced.
Where to dispose of batteries?
Cadmium, in particular is highly toxic and a well-documented environmental hazard. Always dispose of batteries at a recycling center. If your community has recycling pickup, make sure to set batteries aside from ordinary recyclables and label them. If no curbside recycling is available, take discarded batteries to a recycling center.
Can you recondition rechargeable batteries?
Be aware, though, that most tool manufacturers discourage some of these practices, and may even have safety warnings cautioning users about dire results if they attempt to recondition rechargeable batteries that have lost their ability to hold a charge.