Description Hospira
Hospira
Hospira was an American global pharmaceutical and medical device company with headquarters in Lake Forest, Illinois. It had approximately 19,000 employees. Before its acquisition by Pfizer, Hospira was the world's largest producer of generic injectable pharmaceuticals, manufacturi…
Where to buy sterile water for injection?
Sterile Water for Injections - available online at Bound Tree. Due to COVID-19, orders for high demand products may be impacted. Learn how we can help you here.
Do you need a prescription to buy sterile water?
You do not need a prescription. The prescription is to make sure that you get water sterile per medical requirements, and so that you get to claim it against your insurance. You do not. However, it is often more convenient to lump it together as prescription drugs are often provided as a dry salt, and need to be made up with sterile water.
Where to purchase sterile water?
The generics giant said the acquisition will complement its injectable product portfolio as well as enhancing its R&D operations It will pay the full amount in cash to the current owner, Water Street Healthcare Partners, with an option for a further US$ ...
When to use a 10ml syringe?
Syringes are available in many sizes, ranging from 0.3-mL insulin syringe to 60-mL or greater capacity. The decision to use a specific syringe is based on the volume of medication to be administered and the route of administration. The 3-mL and 5-mL syringes were introduced in Chapter 5 for oral liquid medications.
See more
What is the use of sterile water for injection?
Sterile Water for Injection, USP is used for fluid replacement only after suitable additives are introduced to approximate isotonicity and to serve as a vehicle for suitable medications. Sterile Water for Injection, USP is indicated in the aseptic preparation of parenteral solutions.
What is water for injection 10ML?
WATER FOR INJECTION 10ML is a diluent vehicle that contains clear, colourless, odourless water. It is sterile and contains no antimicrobial agents or other added buffers. WATER FOR INJECTION 10ML is intended for dissolving and diluting drugs, which are meant for parenteral use.
What is sterile water used for in pharmacy?
Sterile water for Inhalation is Water for Injection that is packaged and rendered sterile and is intended for use in inhalators and in the preparation of inhalation solutions.
What is the difference between sterile water for injection and water for injection?
Water for injection is water of extra high quality without significant contamination. A sterile version is used for making solutions that will be given by injection. Before such use other substances generally must be added to make the solution more or less isotonic.
Why do doctors use distilled water for injection?
Because distilled water is so pure, it is a common tool used in the medical field. Hospitals use distilled water to prepare food for their patients and sterilize materials. Surgeons use distilled water during medical procedures.
Is water for injection a medicinal product?
Water for Injections is indicated to be used as a vehicle for dilution and reconstitution of suitable medicinal products for parenteral administration. The dosage administered will be dictated by the nature of the additive used. The administration rate will be dependent upon the dose regimen of the prescribed drug.
Can I drink sterile water?
Sterile Water for Irrigation is not potable water and is not intended for oral administration. Sterile Water for Irrigation that has been warmed must not be returned to storage.
Can you practice Injections with sterile water?
In addition, sterile water for irrigation is not labeled for use as an injection in patients. Sterile water for injection must pass a USP particulate-matter test that sterile water for irrigation does not have to pass, so they are not considered equivalent.
Does sterile water expire?
Sterile Water for Injection is given an expiration date by the FDA based on how long the product is expected to maintain sterility (“shelf life”). After the expiration date, the vacuum may no longer be working, and bacteria may get in to contaminate the water.
Is sterile water distilled water?
Is sterile water the same as distilled water? No, sterile water should not be confused with distilled water. Distilled water is created by a process of steaming and condensation, and does not contain any minerals like salt, calcium or iron. A distinction should further be made between sterile water and saline solution.
What is sterilized water?
The process of killing, inactivating, or removing microorganisms (bacteria, viruses, etc.) from a quantity of water. The normal methods of sterilization involve agents such as heat, chemicals, or radiation.
Can sterile water be used instead of normal saline?
Conclusion: Sterile water is an inexpensive alternative to isotonic saline for irrigation during PCNL. We did not find any difference between the two irrigation solutions regarding the safety; however, this should be confirmed further, especially for larger calculi.
What is sterile water used for?
Sterile Water for Injection is indicated for use only as a solvent or diluent vehicle for parenterally administered drugs or solutions and as a source of water for parenteral fluid replenishment after suitable additives are introduced.
What is the osmolarity of sterile water for injection?
When administered intravenously as a vehicle for drugs, sterile Water for Injection provides a source of water for parenteral fluid replenishment after sufficient solute is introduced to achieve an osmolarity of 112 mOsmol or more per liter.
What is USP sterile water?
Sterile Water for Injection, USP is a sterile, nonpyrogenic, solute-free preparation of distilled Water for Injection. It is for use only as a sterile solvent or diluent vehicle for drugs or solutions suitable for parenteral administration. The pH is 5.5 (5.0 to 7.0).
How much molarity is needed for intravenous injection?
Do not use for intravenous injection unless the osmolar concentration of additives totals at least 112 mOsmol/liter (two-fifths of the normal osmolarity of the extracellular fluid - 280 mOsmol/liter).
When to remove solution container from overwrap?
Do not remove solution container from its overwrap until immediately before use. Use sterile equipment and aseptic technique.
How is water balance maintained?
Water balance is maintained by various regulatory mechanisms. Water distribution depends primarily on the concentration of electrolytes in the body compartments and sodium (Na +) plays a major role in maintaining physiologic equilibrium.
How much water is needed to maintain a healthy body?
Average normal adult daily requirement ranges from two to three liters ( 1.0 to 1.5 liters each for insensible water loss by perspiration and urine production). Water balance is maintained by various regulatory mechanisms.
What are the adverse effects of sterile water?
Serious adverse reactions, including cerebral or pulmonary edema, massive hemolysis, and acute renal failure can result from the hypotonicity of Sterile Water for Irrigation [see Excessive Water Absorption ].
When to discontinue sterile water for irrigation?
Monitor patients closely for absorption of clinically relevant amounts of fluid during and for an appropriate period after the procedure. If absorption occurs , discontinue Sterile Water for Irrigation.
What is the pH of sterile water for irrigation?
No antimicrobial agent or other substance has been added. The pH is 5.5 (5.0 to 7.0). Sterile Water for Irrigation is hypotonic with an osmolarity of zero mOsmol/L.
What to check before adding a substance?
Before adding a substance or medication, verify that it is soluble and/or stable in water and that the pH range of Sterile Water for Irrigation is appropriate.
What to do if sterile water is not clear?
Inspect Sterile Water for Irrigation visually for particulate matter and discoloration prior to use. Discard if the fluid is not clear or the seal is broken.
What is a flexible plastic container?
The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the fluid significantly. Water in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials.
How hot should a pharmaceutical product be?
Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat. Store at room temperature (25°C): brief exposure up to 40°C does not adversely affect the product.
How to store WATER FOR INJECTION 10ML ?
Store WATER FOR INJECTION 10ML at a controlled temperature not exceeding 20°C to 25°C. Do not freeze and store it away from direct sunlight.
What should I be aware of before using WATER FOR INJECTION 10ML ?
Do not inject a cloudy looking or any precipitate containing product. Always make sure that WATER FOR INJECTION 10ML is a clear solution and free from any particles.
What is water for injection?
WATER FOR INJECTION 10ML is a diluent vehicle that contains clear, colourless, odourless water. It is sterile and contains no antimicrobial agents or other added buffers. WATER FOR INJECTION 10ML is intended for dissolving and diluting drugs, which are meant for parenteral use. WATER FOR INJECTION 10ML is also used to wash small wounds and during minor surgical procedures.
What is the purpose of parenteral preparations?
This process helps in the prevention of haemolysis, i.e., the breakdown of red blood cells.
Can you use 10ml water for kidneys?
WATER FOR INJECTION 10ML should be used with caution and only under doctor's supervision if you have any kidney diseases since WATER FOR INJECTION 10ML may contain aluminium that may impair the kidney functioning in high levels.
Does water for injection have aluminium?
WATER FOR INJECTION 10ML may contain aluminium which may impair the kidney functioning at high levels. It is advised to seek doctor advice before starting WATER FOR INJECTION 10ML if you have kidney diseases.
Is water for injection 10ml affected by alcohol?
It is not known if WATER FOR INJECTION 10ML is affected by alcohol consumption. Please seek medical advice for more information.