What are the different types of cable sleeves available?
Sleeves are available in sizes for cable diameters from 1/32" to 1/2". Copper stops can be used with stainless steel cable. Aluminum stops can also be used with stainless steel cable, but only in relatively controlled (or mild) environments. Aluminum stops and copper stops can be used with galvanized steel aircraft cable.
Can aluminum sleeves be used with stainless steel cable?
Aluminum sleeves can also be used with stainless steel cable, but only in relatively controlled (or mild) environments. Copper sleeves, aluminum sleeves, and zinc plated copper sleeves can be used with galvanized steel aircraft cable. Sleeves are available in sizes for cable diameters from 1/32" to 1/2".
What is a steel insert sleeve?
These sleeves have been designed with a small lip that helps the part lock into place once properly installed. With the beauty of 316 stainless steel, the Steel Insert Sleeve brings a look of elegance to any Viewrail cable railing system.
What are swage sleeves made of?
The oval is a standard egg-shaped swage sleeve that is designed to bind the end of a wire rope into a loop. At US Rigging our Stainless Steel Swage Sleeves are made with a classic oval shape. Because they are constructed from stainless steel, these sleeves offer the most resistance to corrosion. What Are Duplex Sleeves?
How do you use steel cable sleeves?
4:257:07How to Select and Use Swage Sleeves - Installation GuideYouTubeStart of suggested clipEnd of suggested clipTogether be sure to leave a small area in between each of the sleeves. And extend the cable ends onMoreTogether be sure to leave a small area in between each of the sleeves. And extend the cable ends on each side beyond the outer edge of the sleeve. By at least two times the cable diameter.
What is a swaging sleeve?
swage sleeves for your application. Swaging refers to. the process of using a tool or machine to apply force to. a sleeve or ferrule, compressing it onto and around a. portion of cable.
What is a rope sleeve?
Sleeves and and stop sleeves are used to terminate the ends of wire rope and cable. They are primarily used on the to keep your cable from fraying. Our specialists are standing by and ready to help. ( yep real people)
What is a wire rope sleeve?
Swage sleeves, also known as ferrule sleeves, cable ferrules, or crimp sleeves, are cylindrical, metal tubes used for terminating ends of wire rope. They are a widely used solution for many rigging and lifting applications as they are stronger, more cost effective, and require less maintenance than wire rope clips.
What is the difference between crimping and swaging?
The basic difference between the two is that the swaging process reduces the ferrule size as it moves towards the fittings, while crimping changes the shape of the entire circumference of the hose.
What is a cable swage?
Swaging is a method of securing cable railing wire with a permanently fitted cable or sleeve. The connection typically exceeds the rated breaking strength of the wire rope or cable. This is accomplished using fittings known as swages. By definition, a swage fitting is a wire rope component.
How do you use a rope protector?
0:241:32Sterling Safe Guard Rope Protector - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide it under your rope. And seal the flaps back up you probably noticed the plastic insert on theMoreSlide it under your rope. And seal the flaps back up you probably noticed the plastic insert on the inside.
What is a friction saver?
Friction savers protect your climbing rope and the tree from damage caused by the rope running over a limb. They reduce friction for an easier climb on moving ropes. Every moving rope system needs a friction saving device at the suspension point.
How do you clamp a rope together?
1:145:26Using Ropeze Rope Clamps - How to Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the end of the rope on one side of the clamp. And use the live end of the rope to form the eyeMorePlace the end of the rope on one side of the clamp. And use the live end of the rope to form the eye to the appropriate size. Needed. The Rope should be positioned in the clamp is shown.
What is cable ferrule?
In the context of wiring, a ferrule is a small deformable metal tube, generally made out of tin plated copper. This short tube (or long ring) is placed over a section of stranded wire extending from stripped insulation, then compressed with a crimping tool to hold the strands together.
How do you make steel cable ends?
0:301:50Making Wire Crimps, Swage Balls, Oval Sleeves Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the correct hole on the head of the crimping. Tool for the wire you're using crush the swage onMoreFind the correct hole on the head of the crimping. Tool for the wire you're using crush the swage on the upper. Half turn it 180 degrees and crimp it again on the lower.
How do you make a steel loop cable?
0:291:40How to Make a Connecting Loop in Steel Cable (EASY) - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne end of cable through either arrow guided clutch button on the urban trapeze. Until severalMoreOne end of cable through either arrow guided clutch button on the urban trapeze. Until several inches of cable emerge. To complete the loop continue threading the cable through design connector.
Stainless Steel Cable Mesh Sleeves
Our stainless steel cable mesh sleeves are constructed using a proprietary process to create a multi-layer, dense knitted cable. With a higher level of compression strength, stainless steel cable mesh sleeves are often used as tadpole gasket bulb or tail cores and can be customized for a variety of applications.
Hollow Stainless Steel Cable Mesh Sleeves
Hollow stainless steel cable mesh sleeves provide a spring-like compression strength for use as tadpole gasket bulb or tail cores. Our hollow knitted steel cable mesh sleeve can be over-braided with fiberglass to provide a thermal gasket or coated with silicone rubber to provide an added level of heat and environmental protection.
Stainless Steel Knitted Wire Mesh Tape
Our stainless steel mesh knitted wire tape is constructed of knitted type 304 stainless steel wire. Stainless steel knitted wire mesh tape is widely used for EMI and RFI shielding for electronics enclosures.
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.
High-Speed Oil-Embedded Mounted Sleeve Bearings
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.
Corrugated Sleeving
The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.
Made-to-Order Unthreaded Spacers
Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.
Polished Unthreaded Spacers
With their mirror-like finish, these are the go-to spacers when appearance matters.
Unthreaded Spacers for Keyed Shafts
Also known as arbor spacers, these are notched to space components on a keyed shaft.
Steel Binding Barrels
Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.
What is a swage sleeve?
Swage sleeves go by a few different names- cable ferrules, cable crimp sleeves. Whatever term you prefer, they serve two main functions for wire ropes. They can be used to connect loops and form an eye in the wire. Other swage sleeves are used as a stopper at the end of a line, anchoring the line and preventing its end from passing through other materials.
Where are swage sleeves made?
US Rigging offers swage sleeves that are made in America and designed to meet high standards and safety guidelines.
What is an oval swage?
The oval is a standard egg-shaped swage sleeve that is designed to bind the end of a wire rope into a loop. At US Rigging our Stainless Steel Swage Sleeves are made with a classic oval shape. Because they are constructed from stainless steel, these sleeves offer the most resistance to corrosion.
What is cable crimp made of?
Our Duplex Sleeves are available with zinc or tin plating to add resistance to corrosion, or made from copper or aluminum. The aluminum Duplex Sleeves come in several different variations.
Where is US rigging made?
US Rigging is a manufacturer and master distributor of climbing ropes, fall protection equipment, and industrial rigging equipment located in Santa Ana, California. This Orange County-based company is proud to provide American Made products with both safety and service in mind.
What are wire rope sleeves?
Wire rope sleeves and stops are wire rope accessories used to terminate the ends of wire rope and cable. A wire rope stop may be placed anywhere on the steel cable but is primarily used at the ends to keep the wire rope from fraying. The oval sleeves are used on to make eyes on the end of a wire rope sling or steel cable. Sleeves and stops can be made from a variety of materials depending on their application including aluminum, copper, stainless steel and galvanized steel. Most sleeves and stops utilize a hydraulic press for swaging but some may be "hand swaged" by using a special swage tool. Don't see the sleeve or stop you need here? Please contact our sales team and our sales associates would be glad to assist you.
What are sleeves and stops made of?
Sleeves and stops can be made from a variety of materials depending on their application including aluminum, copper, stainless steel and galvanized steel. Most sleeves and stops utilize a hydraulic press for swaging but some may be "hand swaged" by using ...
What are sleeves and stops?
Sleeves and stops are available in aluminum, stainless steel, copper, and zinc plated copper; stops are offered in aluminum, stainless steel and copper. Zinc plated copper sleeves and copper sleeves can be used with stainless steel cable . Aluminum sleeves can also be used with stainless steel cable, but only in relatively controlled (or mild) ...
Can you use copper stops on stainless steel?
Copper stops can be used with stainless steel cable. Aluminum stops can also be used with stainless steel cable, but only in relatively controlled (or mild) environments. Aluminum stops and copper stops can be used with galvanized steel aircraft cable. Aluminum stops and copper stops are also available in sizes for cable diameters ...