How To Replace a Fluorescent Tube with LED Batten lights?
- Switch all power off at the mains.
- Remove the fluorescent tube from the body of the fitting by rotating the tube and prizing the pins out at either end.
- Unscrew the base of the fluorescent fitting from the ceiling.
- Disconnect the wiring from the mains to the fitting. ...
Full Answer
Are LED lights better than fluorescent?
Yes. In fact fluorescent lamps are hazardous as they contain mercury, a dangerous and toxic element. That alone makes LED lights better. Secondly, LED lights are more efficient, so they save money and reduce human warming. Thirdly, LEDs can be tuned to natural light color and brightness to support your circadian needs.
Does a LED light run cooler than a fluorescent light?
While some fluorescent tubes now use a different type of phosphorous powder to produce a warmer color, most fluorescents produce only a cold blue/white light. It is stark and not very welcoming. LEDs on the other hand provide all manner of different colors easily for any purpose. This is what makes LEDs so adaptable.
Are LED lights more efficient than fluorescent?
LED lights are 50% more efficient than Fluorescent. It has a longer life than Fluorescence. But Fluorescent are also used for specific applications. It can be said that with the coming of the modern era, LED lights are far better than Fluorescent.
How to easily replace fluorescent tubes with LED tubes?
LED Tubes – The Ultimate Guide to Replacing Fluorescent Tubes
- Tube Color Temperature. ...
- Understanding Tube Sizes. ...
- LED Fluorescent Replacement Tubes. ...
- LED Fluorescent Replacement Tube Options. ...
- Universal (T12 Magnetic or T8 Electronic) Ballast Compatible LED Tubes. ...
- We Are LED Fluorescent Replacement Tube Experts. ...
- Selecting the Right Replacement. ...
Can you replace fluorescent tube lights with LED?
Can I convert a fluorescent fixture to LED? Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes.
Can you use LED tubes instead of fluorescent tubes?
In short, YES! New linear LED tube bulbs are simple plug-and-play and ballast compatible. You will simply need to remove your fluorescent bulb and plug in your LED light replacement.
Do LED tubes require a starter?
LED tubes do not need to have a starter (fuse) and can be fixed to be used without ballast. LED tubes are mostly used for home offices, garages and storage spaces at home.
Do you have to remove the ballast for LED lights?
An LED light does not require a ballast because it uses a component called a “driver” to regulate the power going into the bulb.
Do you need a ballast with LED lights?
No, you do not need a ballast with LED lights to regulate current. However, if you do use a direct fit the ballast will still use energy and add to...
How to convert 4ft fluorescent light to LED
Maybe you have a home office or kitchen and want to convert your 4ft fluorescent light to LED. If you purchase a UL Type A LED tube you can simply...
Can I put LED bulbs in a fluorescent fixture?
The simple answer is yes you can put an led bulbs in a fluorescent fixture, but you must work out which type of fluorescent tube and fixtures that...
How do you bypass an LED tube ballast?
To bypass an LED tube ballast is a few easy steps, but we would recommend that you use a qualified electrician. Although quite straightforward, it...
What is LED tube?
The LED tubes are a great energy efficient alternative to fluorescent tubes. They are also featured with improved color rendering (CRI), burn out less frequently, and require overall less maintenance.
What is the least expensive LED replacement?
The most commonly installed but also least expensive (and oldest) option is the direct wire or ballast bypass LED fluorescent replacement tube. Rather than building expensive circuitry within for the ballast to function, what this option does instead enables the ballast to be bypassed entirely by the user. At installation, it will run directly ...
What is the demand for replacement LED lights?
There has been a high consumer demand for quality replacement products for LED, which brought about a lot of industry changes, starting with the introduction of the proper light output and safety standards. Much of the development stems from facility and building managers that are looking for ways to replace fluorescent tubes that are problematic with a longer life solution. There is more of a need for development to work on phasing out the T12 ballast technology, which has brought many people to look for solutions allowing for reuse of any existing fixtures without having to go through a costly conversion to a different technology. Replacement tubes for LED fluorescent options not only lacked any great light output, but the safety certifications were fairly non-existent. A lack of quality brought about early replacement solutions that unfortunately gave early buyers a poor impression of the technology for LED fluorescent replacement options.
How to tell if a bulb is T8 or T12?
This will tell you quite a bit about the current tube and indicate whether or not the bulb is a T8 or T12. If you do not see markings, the size or diameter of the tube will be the easiest way to tell the kind that you have installed. T8 tubes will be one inch in diam. and T12 will be 1 1/2 inch in diameter.
What are the advantages of hybrid tubes?
Another advantage that hybrid tubes have is they allow the tube light to bypass the ballast quickly if the ballast ends up failing due to its dual operating nature.
How big is a T8 bulb?
T8 will have one-inch diameter, the T5 will have a 5/8 diameter, and a T12 will have 12/8 inch or 1.5 inch diameter. If T8 and T12 have the same bi-pin base, then you can use the bulbs interchangeably using the same fixture just as long as you check the milliamp requirements for the ballast.
What is a T5 ballast?
If you happen to have a tube that is relatively small in diam., about 5/8 of an inch, it is a T5. Once you know exactly what kind of tube that you have installed, the key will then be to understand the kind of ballast. Generally, the T8 will use the electronic ballast, while the T12 tubes will have magnetic ballasts.
What happens when you turn on a fluorescent light bulb?
Each time you turn on a fluorescent bulb, a small amount of a mercury vapor is burned off. Once that is diminished, the bulb will no longer work. On the other hand, the life of an LED bulb is not affected by the number of times it is turned on and off.
How long do fluorescent lights last?
Some linear fluorescent lamps are now rated to last up to 84,000 hours, while the average life of a fluorescent tube lamp is only 30,000 hours. That is over twice as long, so keep that in mind when you are calculating your purchase. The LED lamp is more expensive, but you will need to replace your fluorescent bulbs 2 or 3 times during the lifespan of an LED. Keep in mind the labor costs of replacing those fluorescent bulbs, particularly if you are lighting a large warehouse.
How much more efficient are LED bulbs than fluorescent bulbs?
That means if you are spending $10,000 on your lighting energy costs per year, your bill will be reduced by $3,000 or more, every year that you use the LED bulbs. Standard 4-foot T8 LED bulbs are available at as low as 12 watts of power consumption, while their fluorescent counterparts will start at 25 watts.
How many settings does a fluorescent light have?
Most fluorescent lights have two settings, ON and OFF. That means that even if you only need a little bit of light, you still need to operate at full power consumption. Some expensive fluorescent bulbs are dimmable with a special ballast, but at that point your cost is comparable to an LED option.
Why are LED lights so efficient?
One of the big reasons why an LED is more efficient is because it only emits light in one direction. The light emitting diodes (LEDs) are all arranged along the bottom of the lamp and send light downwards. Fluorescent lamps emit light in all directions, including up towards the ceiling where it is not needed.
Can you replace a fluorescent bulb with LED?
In short, YES! LED lighting technology has come to a point where the efficiency makes it hard to justify keeping your old fluorescent or incandescent bulbs in place. Even though the initial replacement costs to choose tube LED tubes will be higher, you will see energy savings that will pay for those up front costs within 2 years in most cases. New linear LED tube bulbs are simple plug and play and ballast compatible. You will simply need to remove your fluorescent bulb and plug in your LED replacement.
Do LED lights have mercury?
LEDs contain no mercury. One of the downfalls of fluorescent lighting is that each bulb contains mercury, which is harmful to the environment and must be disposed of properly. You can purchase special recycling kits to dispose of your fluorescent lamps properly, but add that to the cost of opting for fluorescent lighting over LED.
How efficient are LED tubes?
Let’s take a look at the benefits of using LED tube lights: Better efficiency – LED tube lights are around 30% more efficient than fluorescents. They’re one of the most energy-efficient lights since their effectiveness reaches an impressive 80-90%. It means a vast majority of the power becomes light instead of heat.
How much energy does an LED bulb save?
Less expensive to run – LED tubes allow you to save up to 65% on energy bills. For example, a LED bulb will use as little as 5 watts of power to produce the same amount of light that a filament bulb would do with 40 watts. So, after using LED lights for a month, you will notice the difference in your electric bills.
What is directional light?
Directional Lighting – LED tubes offer directional light and produce a beam angle of 240 degrees, unlike fluorescent tubes with multi-directional light. This means some light is lost in the fixtures and other unnecessary places (such as the ceiling).
What is the best light for commercial space?
For many years, fluorescent tube lights were the number one choice for lighting indoor commercial spaces. They have quality light output and a decent lifespan. But over the years, LED tube lights became an increasingly popular alternative due to several economic and environmental reasons.
How long do LED lights last?
Lifespan – LED tube lights can last up to 30,000 hours, three times longer than a standard fluorescent tube (10,000 – 12,000 hours). With this, you can save the money you had to spend to maintain or replace the lights.
How much energy does an incandescent bulb convert to heat?
When it comes to incandescent bulbs, they convert 80% of their energy to heat. That is why their effectiveness count is only 20%. You can use LED tubes all over your flat or home, and even just after a year, you will notice the return of your investment.
Do LED lights have mercury?
Environment-Friendly – Unlike their fluorescent counterparts, LED tubes contain no mercury. This means they are easy to recycle and do not need special disposing. Also, the greenhouse gas emission is more negligible in the case of LED tubes when compared to incandescent and fluorescents.
Why do you want to use the same fluorescent fixtures?
Ideally, you would want to use the same fixtures due to cost and time considerations of changing the fluorescent fixtures. Unfortunately, sometimes there is no choice but to go through a costly conversion process before these newer tubes can work on the existing infrastructure.
What does the T mean on fluorescent lights?
For example, the initial “T” means the fluorescent fixture comes in a tubular shape and the number next to the ”T” is the estimated diameter in inches. If you are unable to find the label for whatever reason, you can just measure to find the correct diameter size.
How to know if a fixture is T12 or T8?
You also have to know if your fixtures are T12 or T8 beforehand. The good thing is that the bulbs are labeled on the end or, if you can’t find the label, you can just measure the diameter of the bulbs to know the type you need. Once you know the kind of tube, the next step is to find the type of ballas.
How to bypass a ballast?
How do you bypass an LED tube ballast? 1 Most important Kill the Power Supply by turning off completely. 2 Locate the ballast and cut the live (hot) and neutral wires. 3 Remove the ballast from the lamp holder or tuck the wires away. 4 Reconnect the wires.
Why do people use LED lights?
Many people convert to LED lamps because they have a much longer lifespan, are a brighter light and are a lot more energy efficient. Yet, replacing the fluorescent light fixtures can be a bit more complicated because the technologies are not compatible on their own.
Can you put LED bulbs in a fluorescent light fixture?
The simple answer is yes you can put an led bulbs in a fluorescent fixture, but you must work out which type of fluorescent tube and fixtures that you have for your lighting. With T8 tubes it can be as simple as take the old tube out and put the new LED in. But you must confirm the ballast compatibility.
Can you replace T8 bulbs with LED bulbs?
If you already have T8 fluorescent tubes and fixtures in place, it can be as simple as swapping those bulbs with LED bulbs without the need to do a ballast bypass as it has an Integrated Driver for use on Existing Fluorescent Ballast. so no rewiring is required.