What should be used to install T 111 siding?
Things You Will Need
- House wrap or 15 mil tarpaper
- Staple gun
- Utility knife
- Self-adhering window flashing
- 1 5/8-inch exterior screws
- Drill
- No 2 Phillips bit
- 12d galvanized nails
- Hammer
- 4-foot level
How do I seal T111 siding?
- Split logs – a popular wooden look which can be made from other types of wood as well as fiber cement.
- Shingles and shakes – Plywood is installed in big panels, not as shingles and shakes.
- Lap siding – this is a very traditional look in which the different parts overlap. ...
How to stain T111 siding?
Tools and materials for painting T1-11 siding.
- Ladder (if applicable)
- Wire brush
- Brush or broom to clean up scrapings
- Paint scraper
- Paint trays or 5 gallon bucket with roller grid
How to repaint T111 plywood types of siding?
T1-11 siding is wood or wood-based siding for homes. It’s made from either plywood or oriented stand board. You can paint or stain it to create a beautiful look for your home. It’s cheaper than most siding types. T1-11 siding is falling out of popularity.
Is T1-11 treated lumber?
T1-11 siding features narrow, evenly spaced grooves on a rough-finished board for a pastoral appearance. Pressure treated for above ground applications, T1-11 siding features grooves spaced either 4" or 8" on-center to provide options for achieving the look you desire for your home, shed or pump house.
Does T1-11 siding need to be painted?
T1-11 siding is wood or wood-based siding for your home. You should paint T1-11 siding with a high-quality acrylic exterior paint.
Is T1-11 siding wood?
Plywood T1-11 is also known simply as plywood siding. A versatile material, it can be stained to simulate a natural wood look, or it can be primed and painted. Additionally, T1-11 plywood siding can be purchased in either sanded or roughhewn varieties, depending on the finished look desired.
What is T1-11 siding made of?
T1-11 is an exterior wood siding product made from plywood, wood composite or oriented strand board, which is a layered board made of compressed wood chips. If treated with chemicals that fight decay and rot, the siding will be noted as a treated wood siding product—an important requirement for outdoor use.
Does T1-11 need to be treated?
T1-11 siding is not treated and is vulnerable to moisture damage. It comes in two types: plywood and OSB (oriented strand board).
Does T1-11 need to be sealed?
Don't leave T1-11 unsealed. Sun and rain can cause unprotected sheets to de-laminate after only a few years. T1-11 siding has a rustic appeal. T1-11 is an engineered plywood product.
How is T1-11 treated?
Mix a powdered oxygen bleach product with water in a plastic bucket according to the manufacturer's directions. Apply the solution to the T1-11 wood siding with a long-handled scrub brush. Scrub the siding from the bottom up, then rinse thoroughly with a garden hose and spray nozzle. Allow to dry for at least 24 hours.
Do you need Tyvek under T1-11?
Do I Need Tyvek Under T1-11 Siding? T1-11 is both a siding and a sheathing and can be fastened directly to the exterior face of the studs. House wrap like Tyvek or tar paper provides a wind and moisture barrier which can be beneficial depending on the purpose of the structure it is used on.
How do you stain a T1-11?
0:154:48How to stain T1-11 siding with Woodrich Brand Timber-Oil using a ...YouTubeStart of suggested clipEnd of suggested clipWith the overhang cut in we can move on to staining the rest of the wall normally you'd want to useMoreWith the overhang cut in we can move on to staining the rest of the wall normally you'd want to use a drop cloth or a tarp to protect the grass from overspray.
Is it better to paint or stain T1-11 siding?
Paint or Stain Your T1-11 Siding with a Sprayer. You can paint or stain plywood siding, but I prefer acrylic stain because it peels less than paint due to the fact that it seeps into the surface instead of forming a heavy layer on top like paint. On rough sawn T1-11, stain will penetrate even better.
What is T1-11 wood siding?
T1-11 siding is a functional siding with great aesthetics so what is the issue with this siding. Water damage is the primary reason it fails. The plywood siding has less of an issue with water damage than the OSB has. To prevent water damage with any siding it requires proper installation, sealing, and maintenance.
Is T1-11 better than plywood?
Durability Comparison T1-11 Siding: The less expensive OSB grade does not hold up well to exposure to water and over time it will probably expand and warp. It is also susceptible to rot and general wear and tear. The plywood grade is more expensive but it does hold up better than OSB.
What is T1-11 siding?
Wood must be protected from the elements to prevent weathering. Image Credit: Jupiterimages/Photos.com/Getty Images. T1-11 siding is a plywood product used on the exterior of modestly priced homes since the 1970s. When properly installed and maintained, it is a durable exterior surface.
How do I clean T1-11 siding?
Mix a powdered oxygen bleach product with water in a plastic bucket according to the manufacturer's directions. Apply the solution to the T1-11 wood siding with a long-handled scrub brush. Scrub the siding from the bottom up, then rinse thoroughly with a garden hose and spray nozzle. Allow to dry for at least 24 hours.
How do I repair a crack in my siding?
Repair any holes or deep cracks in the siding with an epoxy filler formulated for wood. Apply with a putty knife, smoothing the top of the patch. Sand lightly when dry to blend the patch with the surrounding wood. Wipe with a tack cloth to remove all dust before priming and painting .
How often should I repaint exterior siding?
When properly installed and maintained, it is a durable exterior surface. In many cases, homeowners didn't realize that it required restaining every three to five years and repainting every 10 years. Even if the siding has suffered from weathering, it is salvageable as long as it hasn't delaminated. Advertisement.
How do I paint a T1-11?
Apply two coats of a high-quality latex paint to the T1-11 siding. Paint the grooves with a paintbrush first, then roll the paint over the entire surface of the siding. Allow to dry before applying the second coat of paint.
How do I seal wood siding?
Apply a penetrating epoxy sealer to the surface and exposed edges of the siding with a paintbrush or roller. Pay particular attention to the sides and edges of the siding, since water can wick into the wood and delaminate the layers of plywood. Allow to dry for two to five days.
How long has T1-11 been used as siding?
While originally being developed as a temporary solution before intended to be replaced or having siding added on top of it, some homeowners report having left it as their main siding for 30 years.
What is T1-11 siding?
In the pursuit of the answer to the question of what T1-11 siding is, is that it’s an engineered wood siding product that can help add protection to your structure and given its natural characteristics is often used on sheds and barns.
What size nails are needed for T1-11?
For thicker material, the size of the nails is usually 8d, while thinner material will only require smaller nails.
What happens if you don't use nails on T1-11 siding?
Without the use of good fasteners, in this case the nails used for the T1-11 siding, the material is prone to getting lose, allowing air leaks to arise and cause the range of problems that moisture inside the material could be providing to your structure.
What is split log siding?
Split logs – a popular wooden look which can be made from other types of wood as well as fiber cement. Shingles and shakes – Plywood is installed in big panels, not as shingles and shakes. Lap siding – this is a very traditional look in which the different parts overlap.
How much does T1-11 siding cost?
This sheet of T1-11 siding costs $33 per sheet.
What is a T1-11?
T1-11 is a type of siding made of plywood, meaning it’s a material made from thin sheets of wood veneer. These are glued together to give you the look you see. It also means that this is an engineered type of wood.
How thick is T1-11 siding?
You can find T1-11 siding in sheets that are 48 inches x 96 inches or 48 inches x 120 inches. It comes in thicknesses of 3/8 of an inch, 5/8 of an inch and 3/4 of an inch.
What is the difference between OSB and T1-11 siding?
There are two types of T1-11 siding. Plywood and OSB (oriented strand board). The OSB is the cheaper of the two. The OSB is less expensive because it is wood flakes or strands glued and pressed together and a little lower quality than plywood. Plywood is stronger and will hold up in the weather a little better with either type though you'd need ...
What to do before installing siding?
A pre-installation tip is to paint or stain the edges of the siding panels before you install to seal them up and prevent moisture from seeping in from the sides. It takes a little more time to do, but it is worth it because you will appreciate the longer life your siding will have.
Why does OSB siding fail?
Water damage is the primary reason it fails. The plywood siding has less of an issue with water damage than the OSB has. To prevent water damage with any siding it requires proper installation, sealing, and maintenance. OSB T1-11 siding has more issues with water because of how it is manufactured. It is made with wood strands and flakes ...
What type of siding is used for stucco?
There are lots of options out there for siding from vinyl siding to stone or brick to stucco and lots of variety and options in between. One of the more common types of siding used residentially is T1-11. It is common due to it's more natural wood grain look that people liked when it was popular.
What happens if OSB T1-11 is wet?
If the OSB T1-11 siding gets wet, it swells and expands, flaking, chipping and eventually will rot. T1-11 will last and stay beautiful if adequately installed, painted or stained, sealed and maintained. It has gotten a bad rap due to improper installations when it is used where it is not recommended, such as roofs and decks.
Is T1-11 siding good?
Even though T1-11 siding has gotten a bad reputation, it is a great product that is strong, durable and highly functional if appropriately maintained. As mentioned previously sealing, staining, painting, and maintaining it will allow it to last the full term of its life span.
Is T1-11 siding waterproof?
T1 – 11 siding is not treated and is vulnerable to moisture damage. It comes in two types: plywood and OSB (oriented strand board). This type of plywood siding is injected with rosins and other chemicals, under pressure, to make it waterproof and protected against termites, rot, and fungal decay.
Why is it called T 1 11 siding?
T1 – 11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘ T ‘ in T1 stands for “textured,” which references the grooves or channels cut into the siding. T1 – 11 siding is strong, highly functional and durable – it has a long life as compared to other sidings.
Do you need plywood under T1-11 siding?
As originally designed, T1 – 11 siding was made from Softwood plywood. The addition of OSB was made as a cost-cutting measure. But the best T1 – 11 siding is still made of softwood plywood. OSB is much more susceptible water soaking in and swelling the sheet, especially at the edges.
Is T1-11 treated?
T1 – 11 siding is a functional siding with great aesthetics so what is the issue with this siding. OSB T1 – 11 siding has more issues with water because of how it is manufactured. It is made with wood strands and flakes and is treated with a resin to bind it together when pressure is applied in the process.
How often does T1 11 siding need to be painted?
T1 – 11 siding should be inspected annually (quarterly is even better) so that holes, water or moisture intrusion can be identified and corrected immediately. Hands down, the best way to guard this siding against the elements (and various bugs and critters) and protect and lengthen its lifespan is to paint it.
Does T1 11 siding need to be painted?
Unlike natural hardwood sidings, wherein painting or staining isn’t always needed, t1 11 sidings need to painted or primed at the time of installation—this is an unavoidable installation and maintenance expense.
How do I keep my T111 from rotting?
WOW’s way works well as you just have to cut off the rot and then apply a trim board. PVC is great because it won’t rot and can touch the ground without wicking up moisture. Wood is ok too, but you will want some sort of barrier underneath it where it hits the ground or it will rot in short order.
What does T 111 stand for?
Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘ T ‘ in T1 stands for “textured,” which references the grooves or channels cut into the siding.
What kind of wood is t 111?
T1-11 is a type of siding made of plywood, meaning it’s a material made from thin sheets of wood veneer. These are glued together to give you the look you see. It also means that this is an engineered type of wood.
Is T1-11 siding waterproof?
This type of plywood siding is injected with rosins and other chemicals, under pressure, to make it waterproof and protected against termites, rot, and fungal decay. It is the best version of T1 – 11 siding as it lasts considerably longer. Both Plywood and OSB T1 – 11 siding should be treated or primed.
Is T1-11 siding good?
T1 – 11 siding is strong, highly functional and durable – it has a long life as compared to other sidings. However, for many in the building community, it is thought of as cheap and is considered a low-quality material.
Is it better to paint or stain T 111 siding?
Staining T1-11 is less work than painting it — you may need only one coat — but prior cleaning of the substrate is even more important, because any dirt and discoloration shows through. Adding a mildewcide to the stain prevents mold from forming and adding an unappealing sooty surface coating.
What kind of nails do you use for T 111?
Trim T1-11 with 1- by 3- or 4-inch lumber. Nail the trim to the corners of the house and around windows and doors with 8d galvanized finish nails. It is also common practice to trim the tops to the sheets, where the wall meets the soffit, and the bottoms, where it meets the foundation.
How do I keep my T1-11 from rotting?
WOW’s way works well as you just have to cut off the rot and then apply a trim board. PVC is great because it won’t rot and can touch the ground without wicking up moisture. Wood is ok too, but you will want some sort of barrier underneath it where it hits the ground or it will rot in short order.
Product Overview
Ideal for your exterior siding, this 5/8 in. x 4 ft. x 8 ft. T1-11 12 in. On-Center Pressure-Treated Plywood is made of weather-resistant pine. Each durable panel is protected against rotting, fungal decay and termites. It comes ready to paint or stain to create a customized look.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
