L1 is live and L2 is neutral. These will not short out.... Still not a good idea though... This subject should be stop now! Connect the neutrals with a crimp or connector. If you connect to L2 when the light is switched off the breaker will trip.
What wire goes to L1 and L2?
The yellow wire goes into the common terminal, red goes into the L1 terminal and blue goes into the L2 terminal. The grey wire goes in the common terminal, the brown wire goes in the L1 terminal and the black wire goes in the L2 terminal.
What color wire is L1 and L2?
The incoming circuit wires that provide the power are referred to as the line wires. L1 (line 1) is a red wire and L2 (line 2) is a black wire. Together, they show the motor voltage. Having both an L1 and L2 indicate that the motor voltage may be 240 volts.
What does L and L1 mean on a light switch?
The common is for the live wire that supplies the input voltage to the switch. The other terminal is marked as L1 and is the output to the light fixture.
Does Live go into L1 or L2?
Typically, these terminals will be marked COM and L1, or sometimes L1 and L2. Either way, it does not matter which wire is connected where. Usually the permanemt live (from the supply) is connected to COM and the switched live (to the lamp) is connected to L1.
What color is L1 wire?
blackUS AC power circuit wiring color codesFunctionlabelColor, commonNeutralNwhiteLine, single phaseLblack or red (2nd hot)Line, 3-phaseL1blackLine, 3-phaseL2red2 more rows
What does L1 and L2?
These terms are frequently used in language teaching as a way to distinguish between a person's first and second language. L1 is used to refer to the student's first language, while L2 is used in the same way to refer to their second language or the language they are currently learning.
What happens if you wire a light switch wrong?
But here's the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
How do you wire a l1 and l2 light switch?
3:335:21How to wire a 1 way light switch. One way lighting explained. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd an l2 at the bottom by pressing the switch you simply transfer the current from the common toMoreAnd an l2 at the bottom by pressing the switch you simply transfer the current from the common to either the l1 or when you press the switch it takes it over to the l2.
What is L and N in switch?
There are two different name, L (Live) and N (Neutral) on the AC input terminal. Please refer to Fig. 1 for the wiring of the AC input.
Does live wire go to common or L1?
The faceplate of a single, one-way switch has two terminals: "L1" is the terminal to which the neutral core wire is attached - the blue wire (traditionally black, before the change). "COM" or "Common" is the terminal to which the live core wire is attached - this is the brown wire (formerly red).
What Colour is the live wire?
BrownPlug wiring coloursWireColourLiveBrownNeutralBlueEarthYellow and Green
What is L1 L2 L3 in electrical wiring?
Terminology. The three winding end connected together at the centre are is called the neutral (denoted as 'N'). The other ends are called the line end (denoted as 'L1', 'L2' and 'L3'). The voltage between two lines (for example 'L1' and 'L2') is called the line to line (or phase to phase) voltage.