Ultra1Plus™ SAE 5W-30 Synthetic Blend Motor Oil, API SN Plus, ILSAC GF-5 is formulated with a blend of conventional and synthetic base oils and a premium additive package. These oil are designed for use in carbureted, fuel injected, turbocharged and supercharged gasoline engines in both normal and extreme operating conditions.
What kind of oil is ILSAC GF-5?
What Kind Of Oil Is Ilsac Gf-5? A typical ILSAC GF-5 oil has a HTHS of 3 ( 3). The SAE 10W-30, 5W-30, 0W-30, 5W-20, 0W-20 and 0W-16 are based on API Group II, Group III or Group IV base oils, and are combined with API SN PLUS, API SN and resource conserving claims.
What is the ILSAC GF-1 and GF-2 standard?
The ILSAC GF-1 standard indicates the oil meets both API SH and the Energy Conserving II (EC-II) requirements. It was created in 1990 and upgraded in 1992 and became the minimum requirement for oil used in American and Japanese automobiles. ILSAC GF-2 replaced GF-1 in 1996. The oil must meet both API SJ and EC-II requirements.
What is the difference between API SM and ILSAC GF-4?
The standard also requires less additive degradation and reduced oil consumption rates over the service life of the oil. ILSAC GF-4 is similar to the API SM service category, but it requires an additional sequence VIB Fuel Economy Test (ASTM D6837).
What is the ILSAC GF-6 timing chain wear test?
The upcoming ILSAC GF-6 specification includes a two-stage timing chain wear test using a 2.0L Ford turbocharged GDI engine. The test uses a silent chain and runs for 216 hours, under slow and normal driving, and reviews percentage chain stretch — an indirect measure of wear.
Is Ilsac full synthetic?
Ultra1Plus™ SAE 5W-20 Full Synthetic Motor Oil, API SP, ILSAC GF-6A is formulated with synthetic base oil and a premium additive package. This oil is designed for use in carbureted, fuel injected, turbocharged and supercharged gasoline engines in both normal and extreme operating conditions.
What is Ilsac GF oil?
The ILSAC GF-1 standard indicates the oil meets both API SH and the Energy Conserving II (EC-II) requirements. It was created in 1990 and upgraded in 1992 and became the minimum requirement for oil used in American and Japanese automobiles.
What is Ilsac g5?
ILSAC GF-5 oils are formulated to improve fuel efficiency and provide improved performance across a wide range of areas including high temperature deposit protection for pistons, improved protection against the formation of engine sludge and protection of engines operating on ethanol-containing fuels up to E85. to show ...
Is Honda oil fully synthetic?
FUll synthetic oils are produced without the types of chemical compositions found in conventional oils that contribute to oil oxidation and sludge buildup. Honda Ultimate Full Synthetic motor oil is developed for Honda vehicles to enhance engine performance at extreme temperatures or under severe driving conditions.
What is the difference between Ilsac GF-5 and GF-6?
As the successor of the ILSAC GF-5, the GF-6 will be a new industry standard and will be backwards compatible with the previous standards. This means that a GF-6 oil can be used in an engine that previously was using a GF-5 oil, as the GF-6 is simply a higher standard for the oil's properties.
What is the difference between Ilsac and API?
ILSAC GF-6 applies to the fuel efficient viscosity grades, while API SP applies to those heavier viscosity grades like 10W40 and 20W50. API SP will be fully backward-compatible with previous API service categories, including API SN PLUS, SN, SM, SL or SJ.
Is ACEA A5 oil synthetic?
Fully synthetic engine oil of at least ACEA A5/B5 must be used. Lower oil grades may not offer the same fuel economy, engine performance or engine protection.
Is GF 3 synthetic oil?
Hyundai Premium Gasoline Engine Oil SAE 5W20 SL/GF-3 is an half-synthetic engine oil with an improved performance.
What is GFS oil?
ENVIRO+ GF-S is a premium full synthetic, SAE 5W-30, API Licensed engine oil recommended for modern fuel efficient, low emission petrol engined vehicles. It uses advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology.
What type of oil does Honda recommend?
Honda Recommended LubricantsTypeProductEngine Oil (Petrol)5W-40 Semi-Synthetic Fuel Efficient OilEngine Oil (Petrol)0W20 Semi-Synthetic Fuel Efficient OilEngine Oil (Diesel)0W30 Fully Synthetic ACEA C2/ C3Engine Oil (Hybrid)Honda Green Oil10 more rows
What brand is Honda synthetic oil?
After rigorous testing and refinement, Honda began to fill their new Insight Hybrid at the factory with Idemitsu 0W-20. This lower viscosity higher grade synthetic oil used unique additives to enhance stability and reduce volatility – the typical drawbacks of low-viscosity oil.
What brand of synthetic oil does Honda use?
Starting with the 2011 models, most new Honda vehicles come from the factory with the Honda engineered 0w-20 synthetic oil.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
ENEOS Motor Oil 0w-20 is a gasoline motor oil that provides extremely good fuel economy. Blended with organic molybdenum friction-reducing additives, this oil minimizes engine friction and has a very low viscosity of 0W-20.
Customer reviews
There was a problem filtering reviews right now. Please try again later.
