Installing a Beaded Pool Liner
- Step 1 - Preparation. Make sure that you install your pool liner on a warm day where the temperature is 75° or more. ...
- Step 2 - Preparing the Liner. ...
- Step 3 - Push Out Wrinkles. ...
- Step 4 - Attaching the Beads. ...
- Step 5 - Smooth Out Wrinkles. ...
- Step 6 -Start Filling the Pool With Water. ...
- Step 7 - Continue Filling the Pool. ...
- Step 9 - Skimmer and Return Holes. ...
How do you use a beaded liner on a pool?
Using a bead receiver that hangs over the top of the pool wall, the beaded liner simply snaps into the bead receiver giving you an even and consistent look. Because they install evenly around the pool wall, beaded liners form beautiful designs and patterns including wall borders and tile trims.
How do you attach a pool liner to the wall?
First, go to the north corner of the pool and slide the beaded edges of the liner into the groove of the bead track at the top of the pool wall. Then repeat the process for the south, east and west corners. Then attach the northwest, southwest, northeast and southeast corners in that order to ensure the pool liner stretches evenly.
What is a bead above ground liner?
This refers to a bead that can fit either J-hook or standard beaded pools and allows the manufacturer to have a single bead type for both kinds of beaded pool. When ordering your bead above ground liner, you will need to choose the bead type. By the way, the choice of pool liner bead may affect the price of your liner.
What is a beaded receiver strip for a pool liner?
Bead receiver strips hang directly onto the pool wall to allow for installation of a standard beaded liner. Beaded liners are easier to install, as the top ledges do not need to be removed for installation.
How do you install a beaded pool liner?
0:050:53Beaded Above Ground Pool Liner Installation (With Voiceover)YouTubeStart of suggested clipEnd of suggested clipPlace the liner in the center of the pool. And work outwards work barefoot or in socks because theMorePlace the liner in the center of the pool. And work outwards work barefoot or in socks because the treads of your shoe could rip the liner choose a hot day so the liner is stretchy.
What is an EZ bead pool liner?
EZ-Bead. The EZ-Bead bead type is two beads in one; it can be used as either a standard bead that fastens into a bead receiver on the pool wall or as a J-hook used 'as it is' - hanging on the pool wall. There is no need to modify the bead to utilize either of these installation methods.
What is the easiest pool liner to install?
Beaded pool liners are the easiest type of liner to replace. Using a bead receiver that hangs over the top of the pool wall, the beaded liner simply snaps into the bead receiver giving you an even and consistent look.
How do you install an expandable pool liner?
Expandable pool liners stretch into shape as you fill the pool, by slowly releasing the vinyl liner as the pool fills with water....How to Install an Expandable Pool LinerSTEP ONE: DRAIN THE POOL, REMOVE THE LINER. ... STEP TWO: WALL & FLOOR PREP. ... STEP THREE: INSTALL THE LINER. ... STEP FOUR: FILL THE POOL, LET OUT THE LINER.
Which is better beaded or overlap pool liner?
Particularly for an amateur, that makes overlap liners much easier to install. You can even change the pool's bottom, cove size, and bottom thickness, and still the liner can be made to fit. Beaded liners have no room for adjustment. You either built the pool right, or you didn't.
What is the difference between an overlap pool liner and a beaded pool liner?
The difference between a “beaded” style liner, and an “overlap” style liner is the way the liner is held in place at the top of the swimming pool. Beaded aboveground pool liners have a very small groove or lip at the top edge of the liner.
How do you overlap a beaded pool liner?
0:001:38Overlap, Beaded and Unibead Liner installation video - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a bead receiver that hangs over the top of the pool wall the beaded liner simply snaps intoMoreUsing a bead receiver that hangs over the top of the pool wall the beaded liner simply snaps into the receiver. Giving you an even and consistent.
How tight should pool liner be?
Fill it up and it should stretch and push the wall out. It's buckled because its a tight fit. When installing unibead and j-hook liners, just imagine the pool as a clock. Lay the liner in the pool and center it in the bottom.
Why does my pool liner keep falling?
Long-Term Damage. Over time, the liner track can open up due to factors like water pressure and the age of the liner. The lip on the bead will no longer stay in the track by itself. Once the liner pull is done, a liner lock or retainer strip will be needed to temporarily hold the liner in the track.
How deep can an expandable pool liner go?
With an expandable liner, you can go down 12” to 36”, but there will be wrinkles. With both of these options, you at least have the opportunity to keep more shallow water at the edge, for children. If you use a snap-in or beaded liner, don't try to dish-out. That type of liner has no room for adjustment.
What is overlap expandable pool liner?
Overlap liners basically hang over the side of your above ground pool wall. The Liner is made with excess material so it can fit on the common 48" or 52" walls. Secured with Pool Coping Strips that hold the liner in place (not included). The excess material is then simply cut off.
How much overlap should be on a pool liner?
There should not be any wrinkles, however, there will most likely still be a very small air gap between the liner and the cove. 3-5” is ideal, but a little more is ok. The liner will stretch in place further once water is added.
Why do you need sunshine on a liner?
This increases the elasticity of the liner and will greatly improve the final results of the liner install.
What is a H.I.I. pool?
by Doughboy manufactures oval pools true to size. The measurement between face of buttress to face of buttress on straight sides will be a bit smaller, however, the bottom rails between buttresses are scalloped which increases the total width measurement of the pool.
Can you install a pool liner in cool weather?
If attempting to install in cool weather (70 degrees or less) the installer needs to take the height of the pool floor and height of the pool cove into serious consideration . If necessary, raising the height of both will increase the level of success of the liner install in cool weather due to the liner not being as pliable as it would be in warmer conditions.
What is a beaded pool liner?
Beaded pool liners are the easiest type of liner to replace. Using a bead receiver that hangs over the top of the pool wall, the beaded liner simply snaps into the bead receiver giving you an even and consistent look. Because they install evenly around the pool wall, beaded liners form beautiful designs and patterns including wall borders ...
Where should a curved seam be on a pool liner?
The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. Smooth out all wrinkles in the bottom. Smooth out the floor of the liner by pushing it toward the pool wall. A soft push broom will be very helpful.
Why is my pool liner not creased?
The liner should not have creases in it because it is twisting around the pool. If the liner is twisting, it is because it is not sitting properly in the pool. Make necessary adjustments before proceeding. Start filling the pool with only a few inches of water.
What happens if you don't attach a wall around a pool?
If you do not attach the wall in this manner and begin from one location and your wall completely around the pool, one of two situations will exist. Either you will have an excess of material or flap on the circumference of the wall or you will be short and have to stretch the material to make it fit.
Do you need to remove the top ledges to install beaded liner?
Beaded liners are easier to install, as the top ledges do not need to be removed for installation. BUY NOW AT THE POOL FACTORY.
Can you put sand on top of a foam pool liner?
Adding mason sand to the cove area will help alleviate the unwanted stress on the pool wall and the liner. You can also add mason sand on top of the foam pool cove.
What is a Unibead liner?
UniBead liners can be used in two ways; either as a traditional Beaded Liner in a swimming pool that uses a Bead Receiver or as a J-Hook Liner in a pool that does not use a Bead Receiver.
How far from the top of a bead is the grove on a UNIBEAD?
Using a Utility Knife/Box cutter, CAREFULLY slice inbetween the grove on already existing on the Unibead Tear Strip (just above the rectangular beaded portion), approximately 7/8" from the top of the bead.
Can you pull a Unibead liner?
NOTE: Never forcefully pull or drag the liner. A UniBead liner can be hung link a J-Hook liner right out of the package by hooking the liner to the top of your pool wall. If you plan to use a UniBead liner as a Standard Beaded Liner, there is an additional step you must take as well as an additional part you will need.
Do you need a bead receiver for Unibead?
You will need a Bead Receiver in order to use your UniBead liner as a Standard Beaded Liner. To use with a bead receiver you must trim off the J-Hook portion of the UniBead system.
These above ground pool liner installation tips will have you back swimming in no time
These tips apply to pools with either overlap or beaded attachment types. Above ground pool liner installation can be pretty straightforward if you follow some simple steps and have everything you need to get started.
Section 2 Above Ground Pool Liner Installation: Removing your old pool liner
Before you begin your above ground pool liner installation, you must get the pool ready by removing the old liner and preparing the pool wall and floor for the new liner.
Section 3 Above Ground Pool Liner Installation: Installing the new pool liner
Now that the pool has been prepared, you can start your above ground pool liner installation of the new liner.
What is a Unibead pool liner?
Unibead pool liners are the ultimate in versatility since you can use it to replace an Overlap Pool Liners as well as Beaded Pool Liners. There are many pros of using UniBead Pool Liners (also called a J Hook Liner) for your pool. First, they are easy to install and ensure an even installation with printed waterline borders. Using a UniBead liner eliminates any need to use coping strips The only drawback can come from taking improper measurements. Following some simple steps makes installing your UniBead pool liner a snap, and ensure it is even all the way around your pool.
How to remove J hook from pool liner?
If you’re installing it as a traditional Beaded Pool Liner, make sure to remove the J-Hook by very carefully making a small incision along the UniBead tear strip just above the rectangular bead. Once the J-Hook is discarded, you can install the liner as a traditional beaded liner and fill your pool with water.
How to measure pool wall height?
Measure the pool wall height from the flat floor to the track or top of the wall. Measure diameter twice, using wall to wall measurements. Once you have your measurements and buy your new UniBead Pool Liner, your next step is to drain your pool and then remove the old liner.
Can you use unibead pool liners on a pool?
Unibead pool liners are the ultimate in versatility since you can use it to replace an Overlap Pool Liners as well as Beaded Pool Liners. There are many pros of using UniBead Pool Liners (also called a J Hook Liner) for your pool.
