How tall should loft railing be? Go from there to the height of your rail—usually 37 inches for residential applications—which allows one inch for carpet and pad, and puts your rail height at 36 inches.
What is the maximum height of a railing?
In General Industry , railing must be 42” high. Simple! But in Construction, the proper response is 42” plus or minus 3”. So, for all intents and purposes, your rail – in the Construction industry - is compliant if the top railing falls between 39” from the walking surface and 45” from the walking surface.
What size corrigated metal panel for a loft rail?
thanks… just working on a corrigated metal panel for a loft “rail” and try’n to figure best design/use of material Residential, inside and outside is 36". Stairs are 34" to 38". You might want to check your local code. I know here in CA it's 42".
How far should a railing be from the wall on stairs?
Details: When you have just one railing on a staircase, the outer edge of the railing must be at least 31 1/2 inches away from the wall on the other side of the staircase. Reason: When you have only one railing, you have more walking path width available than if you had two railings.
What size railing do I need for a 24 inch deck?
Guards are required when then deck is 24" (60 cm) above grade. The minimum height of the railing varies based on the height of the deck. Decks 24" to 5-10" (180 cm) need 36" guards and anything above 5-10" requires a 42" high railing.
How high should a railing be in a loft?
Go from there to the height of your rail—usually 37 inches for residential applications—which allows one inch for carpet and pad, and puts your rail height at 36 inches.
How tall should a top rail be?
(6) The height of handrails shall be not more than 37 inches (94 cm) nor less than 30 inches (76 cm) from the upper surface of the handrail to the surface of the tread, in line with the face of the riser at the forward edge of the tread.
How high are railings on balconies?
Guards for residential decks and balconies need a height between 36 inches and 42 inches, depending on the height of the surface above grade. The required height for railings is between 34 inches and 38 inches, measured above the finished stair tread nosings.
How high should guard rails be?
(a) A standard guardrail shall consist of top rail, midrail or equivalent protection, and posts, and shall have a vertical height within the range of 42 inches to 45 inches from the upper surface of the top rail to the floor, platform, runway, or ramp level.
What is the minimum height of the top guardrail?
36 inches to 44 inches(1) Existing guardrailing shall consist of a top rail, intermediate rail, and posts, or equivalent, and shall have a minimum vertical height of 36 inches to 44 inches from the upper surface of the top rail to the floor, platform, runway or ramp level. [Emphasis added.]
What is the average height for railings?
Handrails should be no less than 34 inches above the stair or ramp and no more than 38 inches above. If you are working with alternating tread devices or ship ladders, you should measure above the tread nosings. The handrail should be between 30-34 inches above.
How high does a balcony railing have to be UK?
1.1 metres highHeight Regulations & Children's Safety In domestic and residential areas, railings on outdoor roofs and balconies must be at least 1.1 metres high. Any railing used on stairs or balconies must have gaps of under 99mm in all directions so that children can't pass between them.
How tall is an interior railing?
34 to 38 InchesHandrail Height: 34 to 38 Inches Handrail height on the stairs should be no less than 34 inches and no greater than 38 inches. The way this is measured is to begin at the leading edge of the stair nosing and run an imaginary vertical line upward until it reaches the top of the railing.
The Basics of When Guardrail is Required
In General Industry, OSHA standards say the guardrail height railing must be 42” high. Simple!
Guardrail Height for Elevated Workers
One such caveat specifically noted in the OSHA regulations for Construction is if workers are working on stilts.
Measure from Working Surface
It is also important to remember that the height of 42” is measured from the walking/working surface which is not always the same as the floor or roof height.
Consider the Work Being Done
Other times, the tasks we are working on inadvertently cause us to bypass the protections that have been put in place. Take a look at any multi-story construction site you pass. First, do you see rails at the perimeter of the building? If so, let’s assume the rails meet all the proper height criteria.
Guardrail Exceptions for the General Industry
Finally, we can’t forget to turn to letters of interpretation to see if anything differs from the regulations as written. In this case, for General Industry, one such letter of interpretation exists.
How high should a handrail be on stairs?
Handrails on sides of stairs can be between 2'-7" and 3'-2" measured vertically from the line of flight. Rail heights on 'guards' (horizontal railings, not sloping) need to be 3'-6" high but there are times when 2'-11" is OK. Consult a building professional or call your local building official to confirm the proper height required ...
Do you need a handrail on a solid wall?
Currently, the Building Code doesn't require a handrail on the solid wall, but you do require a handrail and guard on the open side of the stairs. If the basement is unfinished, you can get away with just a handrail on one side.
Can you have a railing on both sides of stairs?
Generally, if the stairs are wider than 48", it is best to have a railing on both sides. I hope this helps.
How high should a handrail be on stairs?
Handrail height on the stairs should be no less than 34 inches and no greater than 38 inches. The way this is measured is to begin at the leading edge of the stair nosing and run an imaginary vertical line upward until it reaches the top of the railing.
How far apart should two railings be?
When you have two railings (one on each side of the stairwell) those railings must be at least 27 inches apart from each other, measuring between the inside (stair-side) surfaces of both handrails.
How far away should a handrail be from the wall?
When you have just one railing on a staircase, the inside (stair-side) edge of the railing must be at least 31 1/2 inches away from the wall on the other side of the staircase. Measure this distance from the side of the handrail closest to the wall and extend the line to the wall.
How much clearance do you need for a handrail?
Minimum hand clearance means the distance between the handrail and the wall. In other words, this is the area where your hand goes. Provide at least 1 1/2 inches of clearance between the wall and the railing for easy grasping by the hand.
What is the staircase code?
Staircase code is rooted in a set of solid ideas that all revolve around the notion that gravity isn't our best friend on staircases. So, the staircase code dictates that there must be handrails on the incline portion of stairs and guards on the horizontal parts.
What is a guard rail?
Guards are the rails that protect users from falling off of high areas, such as landings. Landings can be intermediate horizontal sections within a staircase or terminal sections at the top or bottom of a staircase.
How high can you fall off a deck?
The theory is that a person may become injured by falling off of an 18 inch-high deck, for example, but nowhere near as severely as if that person fell 8 feet down. Even though building code does not require a guard for surfaces that are lower than 30 inches, it is always safest to include one in these situations.
How high should a deck railing be?
The minimum height of the railing varies based on the height of the deck. Decks 24" to 5-10" (180 cm) need 36" guards and anything above 5-10" requires a 42" high railing.
How high is a guardrail?
USA Rail Height For REsidences. Guardrails are required once the deck is 30" or more above the grade. A 36" rail measured from the top of rail to the deck surface is required. California is the one exception where they require 42" guards.
