Receiving Helpdesk

how long does it take to ignite traeger

by Laurence Rohan III Published 3 years ago Updated 3 years ago

roughly 5 minutes

Full Answer

Why will my Traeger not ignite?

If your Traeger grill fails to start, then some of the possible causes are a tripped GFCI on the outlet, bad power outlet, blown fuse on the back of the controller, bad extension cord, and break in the power cord. Your grill won't light.

Why does my Traeger still says igniting?

If you receive this error, you do not need to do anything; the grill is simply notifying you that it is taking a little longer to ignite. A slow ignition will typically be followed by an overshoot of the set temperature before leveling out.

How do I know if my Traeger is igniting?

0:302:58Traeger Grills - Troubleshooting: Initial Firing - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut your hand over the fire pot to feel that air and also feel that the hot rod is warming up makeMorePut your hand over the fire pot to feel that air and also feel that the hot rod is warming up make sure you do not stick your hands inside the fire pot because you may burn your fingers.

How long does it take for a smoker to ignite?

After about 4-5min you will see lots of smoke. Wait until you hear the roaring sound of the fire and less smoke, then shut the lid and turn to the desired temperature. Wait until the temperature is reached before putting your food in.

Does Traeger take a while to ignite?

Open-Lid Startup Process Set your Traeger grill to the SMOKE setting with the lid open. You will hear the fan running. Wait for the fire to ignite and establish, roughly 5 minutes, give or take. You should hear a difference in sound from just the fan to hearing a flame going.

Is it normal for Traeger to smoke when igniting?

This may seem alarming, but seeing smoke coming from the hopper during a cook is indicative of an airflow issue--not the pellets in the hopper ready to ignite. Typically the fan is not blowing to create the correct pressure to vacuum out the exhaust, allowing smoke to escape out of the hopper.

How does a Traeger ignite the pellets?

Traeger grills use electricity to power the auger the feeds real hardwood pellets to the fire and the fan that circulates heat and smoke to ensure consistent results. The fire in a Traeger grill is fueled by 100% all-natural hardwood pellets.

How long does it take for a Traeger hot rod to turn red?

Look in the firepot and verify that the auger is turning—the auger motor should be turning on a cycle, roughly 15 seconds on, 1 minute off (this can vary). As the cycle proceeds, check to see if pellets are feeding into the firepot. If the auger is not turning, go to the next step.

What do you do when your Traeger won't turn on?

0:073:49Why Doesn't My Traeger Grill Power On - Traeger Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipMay just be a simple reset on that GFI you should be good to go and the third thing is you may haveMoreMay just be a simple reset on that GFI you should be good to go and the third thing is you may have a break in your power cord that's connected to your trigger. Make sure you check that out.

How long does a pellet grill take to heat up?

10 to 15 minutesLike gas grills, pellet grills preheat fast (10 to 15 minutes). The design discourages flare-ups. Some pellet grills allow you to regulate temperatures in 5-degree increments, giving you pinpoint heat control. A thermostat in the cooking chamber sends precise signals to the controller and regulates pellet delivery.

How do I start my Traeger for the first time?

1:202:58How To Fire Up Your Traeger - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn it to the shutdown cycle. And let the fan run until it turns. Off. Now that the auger isMoreTurn it to the shutdown cycle. And let the fan run until it turns. Off. Now that the auger is charged turn your controller back to the on position. And set the temperature dial to smoke.

How do you start a Traeger pellet grill?

0:041:41How to Start and Ignite a Traeger Pellet Grill - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe control panel turn them out to smoke. And then flip the power switch on. This turns on the fanMoreThe control panel turn them out to smoke. And then flip the power switch on. This turns on the fan motor and the auger starts feeding pellets into the firebox.

Is it possible to smoke a Traeger at 225 degrees?

On the 225 setting, your Traeger will produce some smoke, but not nearly as much as on the Smoke setting. However, if you attempt to cook a complete meal in Smoke mode, the meat may never be done.

Traeger barbecues are available at Costco

Century Pellet Grill 22/34 (Costco) The Century has Traeger’s innovative Warming Drawer and a Digital Elite Controller with LED display. Its 6-in-1 adaptability lets you to consistently grill, smoke, bake, roast, braise, and BBQ with wood-fired taste. Costco is the only place where you can get it.

Is a Traeger grill need to be seasoned?

You’ll need to season your new Traeger before cooking your first batch of meals on it. You’ll get the most out of your Traeger Wood Pellet Grill if you follow this easy, one-time initial firing procedure.

What is the best way to utilize a Traeger Pro 575?

To use the Traeger, turn on the power, choose the appropriate grill temperature, set the required temperature for the meat probe, and push the ignite button. In less than five minutes, you’ll see smoke. Close the cover after placing the meat on the grill and inserting the probe. Now you have to wait.

When my Traeger says LEr, what does it mean?

If an LEr error number appears on your grill’s display, it signifies the grill’s temperature is less than 125 degrees Fahrenheit. It may happen if you set it to a low and slow smoke, or if you ran out of pellets if they were too dusty, or if the fire pot was too unclean and filled.

Is it possible to use a Traeger in the rain?

I use my pellet barbecue all year since I don’t have to stand outside in the rain. Something like this would be HIGHLY recommended for your Traeger, both for your comfort and to increase the life of the grill. The most important thing is to keep the pellets dry. I’ve worn mine in the rain and snow with no problems.

Is there a smoke setting on the Traeger Pro 575?

Before you can relocate the grill, you must first elevate the complete front. In addition, unlike the Traeger Pro 22 and 34, the Traeger Pro 575 lacks a true smoke function. On the Pro 575, however, a nice smoke ring may still be created.

How Long Does It Take To Ignite A Traeger Grill?

So many factors determine the ignition time of a Traeger grill from the size and shape. However, It takes 4 to 5 minutes for a proper functional Traeger grill to ignite. This is due to the time it takes smoke to set.

Is It Easy To Ignite A Traeger Grill?

Even though the Traeger grill model varies, they are all easy to ignite. Whether you are a beginner in the grill and barbeque niche or an advanced chef, the ignition process of a Traeger grill is simple. Just follow the instructional sheet to set them at the appropriate temperature for preheating and you are good to go.

How Long Should A Traeger Grill Take To Ignite?

Two to five minutes should be ideal, but with internal and external factors that come into play for some Traeger grill models, it should not exceed 15 to 20 minutes.

How To Ignite A Traeger Grill

While most Traeger grill models have the same ignition process. Endeavor to read the instruction sheet that comes with the Traeger grill or check online using your model number.

Does the Traeger always smoke?

Smoke Time Many models of Traeger grill will not produce a lot of smoke once set to higher temperatures.

Does a Traeger smoke at 225?

Your Traeger will put out pretty good smoke on the 225 settingbut probably not as much as on the Smoke setting. However, if you try to run an entire cook in Smoke mode, you may never get the meat done.

Does Costco carry Traeger grills?

Century 22/34 Pellet Grill (Costco) The Century features a Digital Elite Controller with LED display, and Traeger's patented Warming Drawer. of cooking space and it's 6-in-1 versatility allows you to grill, smoke, bake, roast, braise, and BBQ with wood-fired flavor every time. Only available at Costco.

Do you need to season a Traeger grill?

Seasoning your Grill - Initial Burn In Before cooking the first batch of food in your new Traeger, you will need to season the grill. This simple, one-time initial firing process will ensure that you get the most out of your Traeger Wood Pellet Grill.

How do you use a Traeger Pro 575?

With the Traeger, you flip the power switch, dial the temperature you want for the grill, set the desired temperature for the meat probe and press the ignite button. You'll start seeing smoke in less than five minutes. Put the meat on the grill, insert the probe and close the lid. Now you wait.

Can you use a Traeger in the rain?

I use my pellet grill year round and not having to stand in the rain makes a big difference. I'd HIGHLY recommed something like this for your Traeger both for your comfort and extending the grill life. The biggest thing is keeping the pellets dry. I've used mine in the rain and snow without any ill effect.

What does it mean when my Traeger says LEr?

If a LEr error code has appeared on your display of a grill, it means the temperature of the grill is less than 125 degrees Fahrenheit. It may happen if you set it for a low and slow smoke, or maybe you ran out of pellets or they are too dusty and the fire pot is too dirty and stuffed.

How long does it take for a traeger grill to ignite?

Set your Traeger grill to the SMOKE setting with the lid open. You will hear the fan running. Wait for the fire to ignite and establish, roughly 5 minutes, give or take. You should hear a difference in sound from just the fan to hearing a flame going.

How long to cook a traeger grill with lid closed?

Next, set your Traeger grill directly to the desired temperature and preheat with the lid closed for approximately 15 minutes.

How long does it take to cook on an AC grill?

This is normal, and the wait time may be closer to 15 minutes on some AC grills and will vary from grill model to model. Once you find the "sweet spot" for your grill, you should be able to follow that time as a rule of thumb moving forward.

Can you put food on a 375° grill?

At 375º, the consumer is okay to put food on the grill. The "Pre-heating" screen goes away once one of two events occurs: either 10 minutes after the ignition sequence ends and pre-heating has begun or within 5 degrees of the set temperature. Typically if it is cold, it will hit the 10-minute mark first and alert.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version2.24sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[07:31:50] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[07:31:50] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[07:31:50] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[07:31:50] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[07:31:50] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:31:50] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (12.5ms)
  • Application (2.23s)
  • 1 x Application (99.42%)
    2.23s
    1 x Booting (0.56%)
    12.50ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed2.21s
    • select * from `posts` where `published_at` <= '2025-06-30 07:31:50' and `slug` = 'how-long-does-it-take-to-ignite-traeger' and `posts`.`deleted_at` is null limit 1
      3.04ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-30 07:31:50
      • 1. how-long-does-it-take-to-ignite-traeger
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 168034 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.14msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 168034
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      650μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      370μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      300μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      2.2s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 23300 limit 1
      610μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 23300
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        XIf502kNdbDWFcVtXr0yYFGrpDqs7cNiGj8cVvPV
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-long-does-it-take-to-ignite-traeger" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-long-does-it-take-to-ignite-traeger
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "XSRF-TOKEN=eyJpdiI6Im9PVmNFdEVKL1hNSkVYc08zYW1IOGc9PSIsInZhbHVlIjoiMzZWMFg1cVJNbmsrcWgvSzdFUFJ0OUdFTlc2dkUya1JZMjl3Y3RjTHB6YjhiL0tnUEtwcEU2UE9vc2llalhWblZEOXhGN1BJSSs5Q09rMmExU2R0TmFJSHFnNkVnbXFzbG1Kbk1lL2psTlgzSHBFNi80NFZrckhzQU9tNFJXTHUiLCJtYWMiOiI3MzVjNWJmOGVkYzQ1OTRhNmI1ZDc1Mzg2YjkwMTQ4NGFhMWFmYmI1ZDZmNTgwZmUwM2UwYjc4MzhhZTBmYmNjIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IitqNnJHbVhMSzY2WWJRVkk2alFuNWc9PSIsInZhbHVlIjoicDMrcCtxMFlxSVlXMXhZRmFzY3AwNmdXUEI0clNsYzJDelV0Z2M2eXlJNzRsbzlxZEhCYjBGRzZoUW5hTTlsOU5OVy9zYzVKcHRBNDR4V0N1ZnhiQUVZQisvSmRJQkdRb2hWbW1vaW85WjNyYVlmT3FDRzl4eXd4L3lKM2ZZUDEiLCJtYWMiOiJmMzUzMTcwZDcyNzM4OGIxZDgyODg2NmNkNDI5ZGU4ZmE5YzEzMDdmMzY5ZmJmNTI5M2Q5NWZlOWM5ZmUyYTg1IiwidGFnIjoiIn0%3D; _pk_id.64.7c30=a0ef752bdef985ef.1751248909.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6Im9PVmNFdEVKL1hNSkVYc08zYW1IOGc9PSIsInZhbHVlIjoiMzZWMFg1cVJNbmsrcWgvSzdFUFJ0OUdFTlc2dkUya1JZMjl3Y3RjTHB6YjhiL0tnUEtwcEU2UE9vc2llalhWblZEOXhGN" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.114" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "957a13f9ecf110c4-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.114, 172.69.59.35" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-long-does-it-take-to-ignite-traeger" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-long-does-it-take-to-ignite-traeger" "REMOTE_PORT" => "59060" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.59.35" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "XSRF-TOKEN=eyJpdiI6Im9PVmNFdEVKL1hNSkVYc08zYW1IOGc9PSIsInZhbHVlIjoiMzZWMFg1cVJNbmsrcWgvSzdFUFJ0OUdFTlc2dkUya1JZMjl3Y3RjTHB6YjhiL0tnUEtwcEU2UE9vc2llalhWblZEOXhGN1BJSSs5Q09rMmExU2R0TmFJSHFnNkVnbXFzbG1Kbk1lL2psTlgzSHBFNi80NFZrckhzQU9tNFJXTHUiLCJtYWMiOiI3MzVjNWJmOGVkYzQ1OTRhNmI1ZDc1Mzg2YjkwMTQ4NGFhMWFmYmI1ZDZmNTgwZmUwM2UwYjc4MzhhZTBmYmNjIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IitqNnJHbVhMSzY2WWJRVkk2alFuNWc9PSIsInZhbHVlIjoicDMrcCtxMFlxSVlXMXhZRmFzY3AwNmdXUEI0clNsYzJDelV0Z2M2eXlJNzRsbzlxZEhCYjBGRzZoUW5hTTlsOU5OVy9zYzVKcHRBNDR4V0N1ZnhiQUVZQisvSmRJQkdRb2hWbW1vaW85WjNyYVlmT3FDRzl4eXd4L3lKM2ZZUDEiLCJtYWMiOiJmMzUzMTcwZDcyNzM4OGIxZDgyODg2NmNkNDI5ZGU4ZmE5YzEzMDdmMzY5ZmJmNTI5M2Q5NWZlOWM5ZmUyYTg1IiwidGFnIjoiIn0%3D; _pk_id.64.7c30=a0ef752bdef985ef.1751248909.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6Im9PVmNFdEVKL1hNSkVYc08zYW1IOGc9PSIsInZhbHVlIjoiMzZWMFg1cVJNbmsrcWgvSzdFUFJ0OUdFTlc2dkUya1JZMjl3Y3RjTHB6YjhiL0tnUEtwcEU2UE9vc2llalhWblZEOXhGN" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.114" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "957a13f9ecf110c4-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.114, 172.69.59.35" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1751248910.4031 "REQUEST_TIME" => 1751248910 ]
        request_cookies
        0 of 0
        array:4 [ "XSRF-TOKEN" => "XIf502kNdbDWFcVtXr0yYFGrpDqs7cNiGj8cVvPV" "askhelpdesk_session" => "Q5RwRUE9NcSsVsuVb82p9Bsk6IMX8K3Mg6ktfjh9" "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Mon, 30 Jun 2025 02:01:50 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlRLUnFmbnFTc0g2UFBoL0R5NUVudUE9PSIsInZhbHVlIjoiRnJub0g0TUJlWXRtS3d2bmFCSGJwWUVLdUR6UGlVOGErU01kYTlIZS93WTljcWlCYjB6em9qVG5yVU5kR0RNaldNbTRaalJMVzNmN1EraTZwSW1wc1dWc3NlTG1Wemd4anFETWpzdERQc0tDU0JUUUxRVk4yM0lMNEl5YjJOU1giLCJtYWMiOiJiYzE2MTk3ZWI3MTc2M2Y5MjU0YWJhZmM2OGJlM2E0ZmIyMzM5NTBhNWE5YjM0MTdlMGRmNzE2NDJmNThjODJiIiwidGFnIjoiIn0%3D; expires=Mon, 30-Jun-2025 04:01:52 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IlRLUnFmbnFTc0g2UFBoL0R5NUVudUE9PSIsInZhbHVlIjoiRnJub0g0TUJlWXRtS3d2bmFCSGJwWUVLdUR6UGlVOGErU01kYTlIZS93WTljcWlCYjB6em9qVG5yVU5kR0RNaldNbTRaa" 1 => "askhelpdesk_session=eyJpdiI6InVTRFdRSUdvVjIwc0JkSW1senRHV0E9PSIsInZhbHVlIjoieHF1QSsxdkpDZFRMSVNTZkpkNm9yd2kwc2QzZGRmTmxxYXNyeHgzR3dNTWlTWC9LaTFWeWRPOWlzMVZqQzhNYStvY1FWeFlZRyt3bWRnSmJjUUN6R0Z6bG9VTGdreDN5Wk93UENWb1dDdFVFWm8zUHlkSnIydDcrYW13VDRuOFoiLCJtYWMiOiJlY2I1ZDliNDdkMzFkYjFkOGMyZTBlMmM0NWFmZTZkOGVkMTFiOTk5MzcyNWNiZTc0YWM1YTM2NjMyYzMyNjg2IiwidGFnIjoiIn0%3D; expires=Mon, 30-Jun-2025 04:01:52 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6InVTRFdRSUdvVjIwc0JkSW1senRHV0E9PSIsInZhbHVlIjoieHF1QSsxdkpDZFRMSVNTZkpkNm9yd2kwc2QzZGRmTmxxYXNyeHgzR3dNTWlTWC9LaTFWeWRPOWlzMVZqQzhN" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlRLUnFmbnFTc0g2UFBoL0R5NUVudUE9PSIsInZhbHVlIjoiRnJub0g0TUJlWXRtS3d2bmFCSGJwWUVLdUR6UGlVOGErU01kYTlIZS93WTljcWlCYjB6em9qVG5yVU5kR0RNaldNbTRaalJMVzNmN1EraTZwSW1wc1dWc3NlTG1Wemd4anFETWpzdERQc0tDU0JUUUxRVk4yM0lMNEl5YjJOU1giLCJtYWMiOiJiYzE2MTk3ZWI3MTc2M2Y5MjU0YWJhZmM2OGJlM2E0ZmIyMzM5NTBhNWE5YjM0MTdlMGRmNzE2NDJmNThjODJiIiwidGFnIjoiIn0%3D; expires=Mon, 30-Jun-2025 04:01:52 GMT; path=/XSRF-TOKEN=eyJpdiI6IlRLUnFmbnFTc0g2UFBoL0R5NUVudUE9PSIsInZhbHVlIjoiRnJub0g0TUJlWXRtS3d2bmFCSGJwWUVLdUR6UGlVOGErU01kYTlIZS93WTljcWlCYjB6em9qVG5yVU5kR0RNaldNbTRaa" 1 => "askhelpdesk_session=eyJpdiI6InVTRFdRSUdvVjIwc0JkSW1senRHV0E9PSIsInZhbHVlIjoieHF1QSsxdkpDZFRMSVNTZkpkNm9yd2kwc2QzZGRmTmxxYXNyeHgzR3dNTWlTWC9LaTFWeWRPOWlzMVZqQzhNYStvY1FWeFlZRyt3bWRnSmJjUUN6R0Z6bG9VTGdreDN5Wk93UENWb1dDdFVFWm8zUHlkSnIydDcrYW13VDRuOFoiLCJtYWMiOiJlY2I1ZDliNDdkMzFkYjFkOGMyZTBlMmM0NWFmZTZkOGVkMTFiOTk5MzcyNWNiZTc0YWM1YTM2NjMyYzMyNjg2IiwidGFnIjoiIn0%3D; expires=Mon, 30-Jun-2025 04:01:52 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6InVTRFdRSUdvVjIwc0JkSW1senRHV0E9PSIsInZhbHVlIjoieHF1QSsxdkpDZFRMSVNTZkpkNm9yd2kwc2QzZGRmTmxxYXNyeHgzR3dNTWlTWC9LaTFWeWRPOWlzMVZqQzhN" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "XIf502kNdbDWFcVtXr0yYFGrpDqs7cNiGj8cVvPV" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-long-does-it-take-to-ignite-traeger" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]