What is the standard height for a washing machine drain?
What is Correct Height for a Washing Machine Standpipe?
- The standpipe accepts water from the washing machine drain hose.
- The top of the standpipe can be no more than 36 inches above floor level.
- Subtract the height of the P-trap from 36 to find the maximum length of your standpipe.
- Example: If your P-trap is 6 inches from the floor, your maximum standpipe length is 30 inches.
What size drain do you need for a washing machine?
What Size Pipe Is Needed for a Washing Machine?
- Stand Pipe. The stand pipe, which taps into the water supply drain line, should be 2 inches in diameter. ...
- Drain Hose. The drain hose, which drains the water out of the washer, can be connected to an existing laundry sink or into the stand pipe.
- Hot and Cold Hoses. ...
- Installing. ...
What size PVC for a washing machine drain?
Product Overview
- Will not rust, corrode or crack
- Includes PVC drain fitting
- Bottom outlet only (not pre-cut)
- Made from durable, no-break polypropylene
- White matte finish
Are all washing machines the same height?
Washing machine height is the same on virtually all washing machines. Out of the 33 washing machines I checked only 3 were less than 85 cm high. And they were only fractionally lower. They were 84, 84.5 and 84.8 cm. If you need one to be quite a bit lower you may be able to get around it.
Does a washing machine drain hose need to be elevated?
Yes, the drain hose should be raised, and it's always safer to do so higher than the washing machine itself. This would eliminate the possibility of siphoning. You may also take other measures to ensure that you have the best drainage possible.
How high can I run washing machine drain hose?
The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).15-Jun-2018
What height is a washing machine drain and hook up set at?
between 30 and 55 inchesWasher drain hookups should be between 30 and 55 inches from the bottom of the washer. The same measurements apply if the washer drains into a laundry tub. While the faucet heights may vary, the water supply is generally installed directly behind the washer.
How long should the drain hose be on a washing machine?
It is best if your drain hose is 28'' high from the ground. For a top load washing machine, 5'' of the hose will go inside the drain pipe. And for front load machines, the length should be 7''.16-Sept-2021
How do you run a washing machine drain hose?
2:153:21Connecting the Drain Hose and Inlet Hoses to your Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlways secure the drain hose to a laundry tub leg a drain stand pipe or an inlet hose with a cable.MoreAlways secure the drain hose to a laundry tub leg a drain stand pipe or an inlet hose with a cable. Tie. Slowly turn on the water to check for leaks a small amount of water may enter the washer.
How do you route a washing machine drain hose?
Reach around to the back of the washer with the measuring tape or yard stick. Leave the machine in its current position. Measure the maximum height of the discharge hose, at the arch, from the floor where it terminates into the standpipe in the floor, nearby laundry sink or recessed drain in the wall.
Can a washing machine drain into 1 1 2 pipe?
Drain and Trap Requirements A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers. As with all plumbing fixtures and appliances, a washing machine drain pipe must also contain a P-trap.
How high should a sink drain be from the floor?
The standard kitchen sink is 8 inches deep, which means that the normal distance between a kitchen sink drain and the floor is 28 inches. This will vary, depending on the height of the counter and the depth of the sink bowl. In the bathroom, the sink drain is typically between 24 inches above the floor.
How high off the floor should a washing machine be?
Whirlpool recommends a minimum of 39” above the floor, and GE has a 30” minimum, except that GE allows the top of the drain pipe opening to be lower if you secure the hose to the back of the machine near the top at a place the manufacturer indicates using a plastic “anti-siphon clip” Both manufacturers have a maximum ...21-May-2019
How far should washing machine drain hose go into standpipe?
Make sure that the drain hose has not been inserted too far into the waste pipe. The maximum should be 15cm inserted, otherwise a vacuum may form which can cause siphonage. The drain hose should be connected to the standpipe at the correct height for it to work properly.
How high can a washing machine pump drain water?
Generally, the maximum height is around 39" (99 cm). Newer washers often have a drain hose permanently attached, which is designed to make drain installation fool proof. The supplied drain hose shows you exactly how high the washer can discharge.
Does a washing machine drain hose need a loop?
Does a washing machine drain hose need a loop? - Quora. No ! It doesn't you can simply put the drain hose into the elevated pipe this provides a air gap and because it's elevated the water from the washing machine won't be being sucked out.
How to check if a washing machine drain hose is clear?
An easy way to check that the drain hose is clear is to blow air through it. If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump. If the hose is worn or badly kinked, replacing the hose may improve the ability of the machine to pump water.
How high should a clothes washer trap be?
The trap for a clothes washer shall be installed at a maximum of 12 inches (305 mm) above the finished floor.
Can you extend a drain hose?
It is not advisable to extend a drain hose. The drainage system should be brought closer to the appliance, eg extend the plumbing to the washer. The drain pump is designed to pump water to the extent of the drain hose, no further.
Can you extend a washing machine drain hose?
Is it OK to extend washing machine drain hose? It is not advisable to extend a drain hose.
How high should a washing machine drain be?
According to the Universal Plumbing Code, the standard for new washing machine drain sizes is now 2 inches. The pipe should be between 18 and 30 inches above the ground, while the P-trap should be between 6 and 18 inches. These standpipes are connected to the sewage system in the house.
How tall is a washer drain hose?
The maximum height is usually about 39". (99 cm). A drain hose is often permanently connected to newer washers, and is built to make drain installation a breeze. The drain hose that comes with the washer shows you how far it will discharge.
Why is the washer drain hose so high?
Elevating the drain hose is a preventative measure. It’s meant as a barrier to prevent dirty water from coming into the washer from the drain line. If your drain line is clogged and backs up or the city drain is clogged and backs up, that incoming dirty water will be stopped where your drain hose hooks into the drain line. That’s why the washer drain hose comes up so high.
Why does a washing machine pump get hotter?
A greater height or distance of the drain hose will cause the pump motor to work harder and longer - if taken to the extreme the pump will get hotter and for longer and may effect its life. (Some pumps may have design duty cycles and often incorporate an internal overheat thermostat or fusible link.) Some pumps are combined pump /motor units whilst others are direct or belt driven by the main washing machine motor.
Why do you need a hose to loop up high?
Ideally it should be as short as possible, however on many machines you need the hose to loop up high before going into an open stand pipe or waste disposal so that the machine doesn’t siphon and water from the sink doesn't want to flow back to the washer.
What happens if you go too far in a drain pump?
Go up too far or along too far and the drain pump will be under too much load. It either won’t manage to pump at all or won’t pump efficiently and it won’t last as long as it should.
Where should the drain hose be hooked to a washing machine?
Ideally all washing machine or dishwasher drain hoses should be hooked into a sink or stand-pipe (slightly larger than the drain hose so that there is an air-gap) just above the maximum water level in the machine. This is to prevent water flowing out of the machine whilst filling or washing / rinsing and to prevent siphoning out. In some machines the INTERNAL hose from the pump (the pump is always mounted below the wash bowl) rises above the maximum water level so this should not be an issue.
How far away from the base of a washing machine should the drain pipe be?
The distance from the base of the washing machine shouldn’t be higher than 8 feet and no less than 18 inches.
Where does the hose run on a washing machine?
This hose runs from the back of your washing machine to the standpipe.
Why does my washing machine drain overflow?
Any time your washing machine drain overflows, it’s usually a clog in your drain pipe that’s to blame.
Why use a standpipe on a washing machine?
By choosing to use a standpipe instead of connecting your washing machine to a drain line, you can avoid water overflow, as well as unwanted fumes from the sewer. If it is clear that your washing machine pump is functioning properly but water isn’t draining from it, there is likely a clog in the rubber drain hose.
How far away should a washing machine be from a tub?
Furthermore, the tub and hose should be no more than 45 inches from your washing machine. Using a plastic zip-tie, secure the drain hose to a leg of the laundry tub. It’s also a good idea to ensure that the drain hose isn’t near the bottom of the tub, as this can restrict water flow.
What is a laundry tub?
Laundry Tub. What is it: A laundry tub provides your washing machine with one of the best drainage options. More often than not, a clog is to blame for laundry tub failure. When this occurs, the clog is typically located in the U-trap or further down the piping.
What is the best draining option for a washing machine?
What is it: If you want the absolute best draining option for your washing machine, an underground pipe is the way to go.
What is the correct height for a washing machine drain?
Manufacturers specify a height in their installation manual. Whirlpool recommends a minimum of 39” above the floor, and GE has a 30” minimum, except that GE allows the top of the drain pipe opening to be lower if you secure the hose to ...
How high can a standpipe be in Florida?
The only code standard is that the top of the standpipe above the trap weir (top level of standing water in the trap below) can’t be less than 18” or or more than 42” according to the Residenital Edition of the Florida Building Code (P2706.1.2) and the International Residential Code. But the trap at the bottom of the standpipe is usually not ...
How high should a compact washer drain pipe be?
Compact washers can pump up only 5 feet. The drain pipe should be a minimum of 1½" I.D. (inside diameter) to assure proper draining. The washer drain hose is 1¼" O.D. (outside diameter). To be confident that no siphoning of water will take place, the drain plumbing should be a minimum of 30" high. In order for the drain hose to function properly, ...
What is the drain clip on a top load washer?
Please Note: If the drain for your Top Load washer is not 30" high, included in the installation package with a new Top Load washer is a drain hose clip (sometimes called an anti-siphon clip) that attaches to the hose and the back of the washer to lift the drain hose up higher. This is not needed for a Front Load washer due to the design of the unit.
How far does a Whirlpool washer drain hose extend?
When we called Whirlpool customer service, their recommendation was don’t add more than a 4-foot extension to the basic drain hose, which would allow placement of the washer about five feet from the termination. We recently encountered a washing machine that had been relocated from one side of a long laundry room to the other, with a series of drain hose extensions that ran about 12 feet along the floor at the baseboard, then up to the standpipe.
Why does my washing machine smell?
There was a noticeable foul smell in the empty washing machine, however, which was due to the standing water in the hose along the floor that remains after the washer tub has been pumped out. Washing machine drain water contains organic debris from food stains and shed skin cells, along with trace fecal matter from underwear.
How high should a washing machine drain be?
Ideally, the drain should be at least 30 inches from the floor. However, many washing machines require a standpipe height of at least 36 inches and a maximum of 96 inches.
Where should the drain hose go on a washing machine?
Basically, a washing machine drain hose should come from the bottom of the machine and be able to reach upward. Then, one option is to drain the washing machine to the outside of your house. Alternatively, you loop the drain hose over the edge of a laundry tub or a standpipe (more typical).
How far down should a drain hose go?
When you place the drain hose into the standpipe, it should reach down about 4 to 6 inches. You simply place it over the side of the standpipe and down enough, so it doesn’t fall out. You can also use a 180-degree pipe hook to help keep it in place.
What does a washing machine drain hose do?
Plus, it also has a big impact on how your laundry room smells . If a drain hose isn’t the right length or poorly placed, it can lead to a host of problems.
Why attach a standpipe to a washing machine?
You attach it to the hose and the back of the washing machine to raise the hose’s height. If your standpipe is too low, it can lead to overflow issues. Conversely, if it’s too high, you could end up with water flowing back into the machine. Backflow problems can cause your machine to work overtime to pump out water.
What happens if your standpipe is too low?
If your standpipe is too low, it can lead to overflow issues. Conversely, if it’s too high, you could end up with water flowing back into the machine. Backflow problems can cause your machine to work overtime to pump out water.
What happens if your drain hose ends up too long?
If your drain hose ends up too long with everything in its proper position, you’ll need to make adjustments. Remember, you don’t want too much hose crammed into the standpipe, piled up on the floor, or crushed behind your machine. Any one of these instances would require a shorter hose.
