Full Answer
Where should sockets be placed on a kitchen worktop?
The theory is that you shouldn’t be able to reach a socket while you are washing up, when you probably have wet hands. Having a worktop depth of around 600mm will mean that having the socket placed at least 300mm on either side of the sink/draining board will put it out of arms reach and away from any splash zone.
How high should a kitchen worktop be?
In Habitable rooms Sockets need to be a minimum of 450mmfrom the finished floor level and light switches, doorbells and intercom systems need to be at a maximum height of 1200mm. Any electrical switches, outlets or controls also need to be at least 350mm away from room corners. Also Know, how high is a standard worktop? 910mm
What is the standard height of a kitchen socket?
The general rule is to then set your sockets 150mm above this (measured from worktop surface to the bottom of the socket). Added together, this means the standard socket height is 1060mm from the floor to the bottom of the socket.
Can you have too many sockets in a kitchen?
You can never have too many sockets in your kitchen. If in doubt, put another one in; it’s better to have a spare socket on the wall than not enough. You don’t want multi-plugs or extension leads everywhere, or the frustration of having to unplug and plug-in different appliances all the time.
What height should kitchen sockets be UK?
The standard height of a worktop from the floor to the worktop surface is 910mm. The general rule is to then set your sockets 150mm above this (measured from the worktop surface to the bottom of the socket). Added together, this means the standard socket height is 1060mm from the floor to the bottom of the socket.
How close to a hob can a socket be?
'A minimum distance of 100mm, measured horizontally from an electrical accessory to the edge of a free standing cooker or individual hob is considered acceptable for the purposes of avoiding adverse effects from using a cooker or hob.
How close can a socket be to a sink UK?
30cm horizontally(SOURCE: DCLG; Fire Statistics, Great Britain April 2013-March 2014). Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity.
Does a cooker switch need to be above worktop?
Principal rule for siting cooker controls is "within two metres of the appliance, but not directly above it." You just need to take precautions as to exactly where you put it to avoid effects of heat on adjacent accessories.
How high should sockets be?
As a general rule of thumb they should be installed 48 to 52 inches above the floor. This provides a comfortable height for most when standing up. This can vary depending on the height of the individual.
How close can an electrical outlet be to a kitchen sink?
Kitchen Outlets This applies even if there isn't a nearby sink, such as on a bar or island. Additionally, no point on the wall should be farther than 24 inches from an outlet in either direction (meaning 4 feet total between outlets), so you must have an outlet within 2 feet of the kitchen sink.
How far do plugs have to be from sink?
Previous Requirement This should explain why all of your outlets are at least 6 feet from the sink and why you should not install any outlets closer than that. If your house was built after 1996, you can place the outlet considerably closer to the sink. In fact, there is no longer any official requirement for distance.
Where do you put kitchen plugs?
Sockets. There are often two types of socket outlets within your kitchen, there are sockets above your work top and sockets below your work tops. The sockets above your worktops are typically used for your every day appliance such as your Kettle, Toaster, and microwave.