How do you use a creepy crawly?
- Turn off the pool's water filtration pump.
- Place the Kreepy Krauly into the shallow end of the pool and allow it to sink to the bottom.
- Fill the Kreepy Krauly hose with water from the garden hose.
- Connect the water-filled hose to the pool inlet hole, or to the skimmer hole if you do not have a dedicated inlet.
How do I care for my Kreepy Krauly?
Your Kreepy Krauly once set up will require minimal intervention. We recommend every few months you check the cleaner for wear and tear and ensure your chemical balance of your pool is correct as this can harm your cleaner. If I need spare parts or cannot find my answer online, where do I go?
Can you get rid of creeping charlie manually?
Manual removal is not recommended for large infestations of Creeping Charlie. It will take too long, and success will be minimal. But if you see a plant or two here or there, you can get rid of it with your own two hands quite effectively. MATERIALS AND TOOLS Available on Amazon
How do I keep Kreepy from climbing the wall?
To keep Kreepy from climbing the wall too much, remove the Dive Float restrictor and replace with the Wall Climb Adjuster. If Kreepy is getting stuck on bumps in the pool floor, such as concave sections on the pool floor, try to reduce speed, change direction or adjust hose weights slightly to avoid the area or hit it at a different angle.
What is a Kreepy Krauly and do I need one?
Without a Kreepy Krauly the pool water is drawn only from the top of the pool. A Kreepy Krauly draws water from the bottom, top and sides of your pool ensuring circulation of pool water and improving water quality. This helps remove biological particles and fine particles that can cause your pool to look cloudy.
How do you run a creepy-crawly?
4:208:58Kreepy Krauly Classic Pool Cleaner Installation Part 4 of 6 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipLine close the main drain and all suction lines except the vacuum line and the skimmer line to whichMoreLine close the main drain and all suction lines except the vacuum line and the skimmer line to which the creepy-crawly valve will be connected.
Where do you put the weights on a creepy-crawly?
Weights weigh approximately 0.25kg each and are sold separately. The hose weight should be installed on the first hose that connects to the Kreepy Krauly Head, about one third of the way up the hose.
How long should you run a creepy-crawly?
HOW LONG SHOULD A KREEPY KRAULY RUN? Just as long as it needs to, which is generally about 2-4 hours depending on the size of the pool and the amount of debris. Best practice is to remove Kreepy from the pool after you are satisfied with the results.
Why is my creepy not working?
The most common cause for a Kreepy to stop working is clogged filter sand. This is easy to diagnose because whenever you backwash the pool filter, you'll find that the Kreepy works like a bomb for 10 minutes. Then it gets sluggish and slows down or stops again.
Why does my creepy crawly not move?
If Kreepy Krauly is not moving or not pulsating. Check that the main drain and all suction lines are closed, except for the suction line to which Kreepy Krauly is attached (usually a skimmer). Check for debris in the filter or [pump basket]. Check for debris in Kreepy Krauly flapper.
Why does my creepy crawly stay in one spot?
If your Kreepy Krauly is often stuck at one side of your pool there are two potential fixes. If the hose is too short then buy another line and have it extended out enough to cover the pool. On the other hand, if it is constantly being coiled then relaxing it or changing how you keep it stored will fix that problem.
Do you leave your pool cleaner in the pool?
All cleaners should be taken out of the pool when shocking, as well as periodically to rinse off chemical water. The reality is that no one takes these steps and generally leave them in the pool 24/7 to run their daily schedules.
How many hours per day should I run my pool cleaner?
The rule of thumb for pool maintenance is to run your pump for eight hours per day.
How often should you vacuum pool?
In general, it's a good idea to vacuum your pool once a week. You should also vacuum your swimming pool any time you notice large amounts of debris, dirt, or leaves on the floor of the pool (for example, your pool may need vacuuming after a heavy storm).
Why is there no suction in my pool vacuum?
Verify that the vacuum hose is firmly inserted into the inlet port at the skimmer; then inspect the hose for cracks or holes. The skimmer filter is dirty. Pull out the filter basket and check for debris that may be interfering with water flow to the pool pump. Air is getting into the pump through the pump cover.
How do I increase the suction on my pool vacuum?
0:562:56Tip 2 - How to improve your pool pump suction - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust give that a bit of a clean-out. Make sure that the hole is facing the in pipe to pump you checkMoreJust give that a bit of a clean-out. Make sure that the hole is facing the in pipe to pump you check your o-ring. That's so that's make sure it's there secure the lid back nicely on the pump.
Why does my pool pump not have suction?
It could be something blocking it, a dirty pool filter, or too much air in the system. If there's something blocking your pump's suction, check your filter gauge. If it's 10psi above the normal reading, clean your filter. This will reduce pressure and reset your pump's flow.
What to do if your kreepy krauly is not moving?
If Kreepy Krauly is not moving or not pulsating. Check that the main drain and all suction lines are closed, except for the suction line to which Kreepy Krauly is attached (usually a skimmer). Check for debris in the filter or pump basket. Debris may prevent flapper movement.
How to fill a Kreepy Krauly hose?
Fill the Kreepy Krauly hose with water from the garden hose.
HOW DOES A KREEPY KRAULY WORK?
A Kreepy Krauly suction cleaner vacuums the pool bottom in the same manner as if you were vacuuming it manually, with a vac hose and vac head on a pole. It sucks debris up from the floor and brings it into your pump basket, or alternatively into the skimmer basket when using a Vac Plate, or into an inline strainer when connected on the other end of the first hose, that connects into the skimmer. The movement of the cleaner is created by the Flapper, a triangular piece of plastic that alternately closes off one of the two suction tubes, which creates a small ‘hop’ as suction is released for a short moment. As it hops, the Seal (large flat disk in contact with the floor) moves a very short distance, before suction pulls it down to the surface again. With enough suction from the pump, Kreepy cleaners can climb sloped inground pool walls, but will not usually clean steps, swimouts or shallow areas less than 36″ deep.
HOW TO INSTALL OR CONNECT A KREEPY KRAULY?
With the hose sections assembled onto the Kreepy cleaner, submerge the head into the water, and then ‘prime the hose’ by pushing it hand over hand, straight into the water, or holding the end of the hose over a forceful wall return fitting. Once the hose is completely full of water, you can connect it to the skimmer suction hole, first removing the skimmer basket. The Kreepy hose may come loose if you don’t connect it with the Automatic Regulator, although you can use a hose adapter, but the Regulator will make sure the flow rate is not too high for Kreepy to operate properly. A Locking Bar is available to help hold the Kreepy Hose stable in the skimmer, if you have problems with it coming loose.
HOW LONG SHOULD A KREEPY KRAULY RUN?
Just as long as it needs to, which is generally about 2-4 hours depending on the size of the pool and the amount of debris. Best practice is to remove Kreepy from the pool after you are satisfied with the results. If Kreepy regularly operates for extended periods of time, longer than it needs to, you may see increased wear and tear on the Seal and Foot Pad. In addition, your pool circulation is best when operating with a drain and skimmer action, and water quality may suffer if left in ‘cleaner mode’ for large portions of the day.
HOW TO ADJUST KREEPY KRAULY DIRECTION?
The two things that can be done to affect the direction of cleaning patterns is to switch the direction of your pool wall return eyeball fittings (if you have them), and the second thing is to move the hose weights a few inches on the hose (see below).
What to do if Kreepy is stuck behind a ladder?
If Kreepy is getting stuck behind a ladder or handrail, you can install the Kreepy Ladder Guard K12330, or the Polaris G-21 ladder guard kit. Changing the direction of the cleaning pattern can also help, or shortening the hose or reducing Kreepy speed.
How to stop kreepy from flying around pool?
After the cleaner is primed and connected to the skimmer (or other vacuum suction line), you may need to restrict the suction from the other lines coming into the pump (other skimmer and/or main drain lines), by closing a valve so that the pump draws less water from other lines, and more water from the skimmer where Kreepy is connected. Too much flow and Kreepy may ‘fly around’ the pool not touching the ground, and too little flow and Kreepy will just sit there. With some experimentation, you can find the best valve settings for Kreepy to operate well.
What happens if a kreepy is too fast?
If the Kreepy is operating too fast, so fast that it is lifting off the surface and missing debris, or spending too much time on the walls, open up the other suction line valves fully, and restrict the valve for the line where Kreepy is connected.
How to install and operate your Kreepy Krauly rX-Tank
For comprehensive information on how to quickly and easily set up your new Kreepy Krauly rX-Tank for years of trouble-free service, download our Kreepy Krauly Installation and Operation Manuals.
How to install and operate your Kreepy Krauly VTX-7
For comprehensive information on how to quickly and easily set up your new VTX-7 for years of trouble-free service, download our VTX-7 Installation and Operation Manuals.
How to install and operate your Kreepy Krauly VTX-3
For comprehensive information on how to quickly and easily set up your new VTX-3 for years of trouble-free service, download our VTX-3 Installation and Operation Manuals.
How to install and operate your Kreepy Krauly Sprinta Plus
For comprehensive information on how to quickly and easily set up your new Kreepy Krauly Sprinta Plus for years of trouble-free service, download our Kreepy Krauly Installation and Operation Manuals.
How to install your Kreepy Krauly hose
Your Kreepy Krauly hose is made to be almost straight when relaxed in your pool. We recommend you download the “Hose – Use, Storage and Replacement” guide for proper installation and use.
What do I need to do as in respect to specific maintenance of my Kreepy Krauly?
Sit back and relax and enjoy the clean. Your Kreepy Krauly once set up will require minimal intervention. We recommend every few months you check the cleaner for wear and tear and ensure your chemical balance of your pool is correct as this can harm your cleaner.
Why a Kreepy Krauly Suction Cleaner instead of other types of cleaners?
In addition to this, it will also aid in efficient filtering of your water as it draws water through the filter from the top and the bottom of your pool aiding is recirculation and directly removing biologicals matter direct to the filter.
How does a Kreepy Krauly improve water quality and water circulation?
Without a Kreepy Krauly the pool water is drawn only from the top of the pool. A Kreepy Kra uly draws water from the bottom, top and sides of your pool ensuring circulation of pool water and improving water quality. This helps remove biological particles and fine particles that can cause your pool to look cloudy. Because your Kreepy Krauly works with your pool pump this cleaning process occurs automatically with daily cleaning cycles and may reduce your need for chemicals.
How is Kreepy Krauly’s Ultra Flex Hose different to others?
They are carefully designed, tested and manufactured in Australia. The hose has a unique profile that is anti-locking, with a smooth and large bore for more powerful suction, and is highly flexible and durable to allow the Kreepy Krauly unrestricted movement around your pool. Our hard-wearing hose connectors are built to last, with no parts that can snap or break. Best of all, they’re easy to install.
What time does Kreepy Krauly open?
Please see our local pool store list or contact us on 1800 777 255 (from land lines) between 9am – 5pm, Monday – Friday in your local area.
What else do I need to do?
All you will have to do is clean the skimmer box (frequency dependent on leaf load), clean your pool pump filter (as per manufacturer’s instructions) and add chemicals to maintain your chemical balance.
How to keep creeping Charlie from blowing?
Weight the cover down with rocks or bricks to keep it from blowing or shifting back , allowing light to reach the plants.
How to smother creeping charlie?
Smother a larger Creeping Charlie infestation by blocking all sunlight with a barrier of newspaper, tarp, or cardboard for at least a week.
How long does it take for creeping Charlie to grow?
It may take a week—or longer, depending on your soil conditions—for your Creeping Charlie to be smothered. Take a peek at the week mark; if there’s any green left, replace the cover for another several days. When Creeping Charlie is shriveled and brown, it’s good and dead!
What is creeping charlie?
Creeping Charlie— Glechoma hederacea, also commonly known as ground ivy—is an insidious weed that is both resilient and adaptable, making it very difficult to control successfully. A member of the mint family, it will quickly fill an empty space with a mat-like cover of small, round, scalloped-edged green leaves punctuated with delicate violet-blue flowers in early spring. It’s actually quite pretty, and you often see Variegata, its variegated (and far less invasive) cousin, sold in nurseries as a ground cover or cascading filler for planters.
Can creeping Charlie take over a lawn?
Left to its own devices, Creeping Charlie can quickly take over landscaping beds, even a lawn. It grows low to the ground in a vining habit, killing everything else around it. It thrives in moist and shady areas, where grass and other plants don’t grow well. If you see it, act fast, or you will have a hard battle later.
Can creeping Charlie get a foothold?
Maintaining your lawn’s overall health will ensure Creeping Charlie, and other pesky weeds, can’t get a foothold.
Can creeping Charlie kill grass?
If Creeping Charlie has infiltrated your lawn, you can’t very well smother it without killing your grass. It will also be nearly impossible to pull out manually, as it will be entangled with the roots of your turf.
