How do you reset a August door lock?
- On your phone, open the August App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
- Select the Settings menu (gear icon).
- Select the device you wish to reset.
- Scroll to factory reset.
- Select " Reset Lock ".
- On your phone, open the August App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
- Select the Settings menu (gear icon).
- Select the device you wish to reset.
- Scroll to factory reset.
- Select "Reset Lock".
How do I transfer August lock to another owner?
If you want to change a regular user on your August Smart Lock Guest List to an Owner, follow these simple steps:In the August app, select the Guest icon on the lower right-hand side.Choose the Guest you want to edit.Change the Access Level from Guest to Owner.Tap Update to save your changes.
How do I reset my august lock pin?
Follow the steps below to reset your PIN:Open the Google Home App and scroll until you see the August Lock paired with your Google Home account.Select (any) lock.Tap on your Settings Cog in the top right.Select Unlink August Home.Confirm Unlink.On the following screen, select August Home.More items...
How do I reset my august lock battery?
Press on the faceplate and turn counterclockwise to loosen and remove the battery cover. Pull the ribbon to remove all 4 AA batteries. Replace with 4 new standard non-rechargeable alkaline batteries, positive (+) end up. Make sure the batteries snap into place, and the light on your Smart Lock flashes green.
How do you reset a smart door lock?
9:5627:46Kwikset Keypads/Smart Locks Factory Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipButton while reinserting the battery pack keep holding the button for 30 seconds until the lockMoreButton while reinserting the battery pack keep holding the button for 30 seconds until the lock beeps and the status led flash red press the program button once more when the status led flash green.
How do I connect my august lock to a new WIFI?
AndroidOpen the August App and select the associated Home from your Keychain.Select the gear icon to navigate to Lock Settings.Select the associated device to open Lock Settings.Scroll to the Utilities section and select Connect to Wi-Fi Network.Select BEGIN WI-FI SETUP.More items...
How do you put a August keypad in pairing mode?
If the Keypad is pulsating red proceed with in-app setup instructions on your phone....Follow these steps to put your Keypad into setup mode:Open the August App and go to House Settings.Select the Keypad to enter Keypad Settings.Select Disconnect Keypad and then the blue DISCONNECT button.
What happens if August lock battery dies?
Your Smart Lock will give you low-battery warnings for multiple weeks before it loses power. However, if your Smart Lock dies entirely before you can replace your batteries, your key will still work. This is the same deadbolt key that you've always used - the Smart Lock doesn't change the key needed.
How do I know if my battery is out of August lock?
There is no way to check the battery level for your August devices in the August App, but you will be notified when the batteries need to be replaced. Once a lock's batteries reach 25% capacity, a low-battery notification appears on your phone's unlock screen.
How long do batteries last in an August lock?
three to six monthsThe team at August estimates the lock's batteries should last three to six months. That's a shorter suggested lifespan than the six months to a year promised for the older, AA models. According to August, the no. 1 factor in battery life is the quality of your Wi-Fi connection.
How do I reset my August connect?
To perform a hard reset on your Connect, leave the device plugged in and hold the reset button down for 5 seconds, then let go. You should see a pulsating green light, which indicates that the device is back in set up mode.
What are lock master reset codes?
No need to follow a series of steps to get the same result of resetting your phone.Open the dial pad on the phone.Dial *2767*3855# which is a master reset code for samsung phones.
How do I change the 4 digit code on my TRU bolt lock?
0:265:05How to program a TruBolt/Honeywell electronic keypad - YouTubeYouTubeStart of suggested clipEnd of suggested clipHit four hit the unlock again. And i'm gonna put in my new code which is one four two five three sixMoreHit four hit the unlock again. And i'm gonna put in my new code which is one four two five three six i'm gonna hit the unlock again and i'm gonna re-enter. It.
How to factory default August lock?
If you would like to perform a factory default for your August Smart Lock Pro, complete the following steps: 1. Open the app. Access the August Home App on your Android or iOS device. The app can be downloaded for free from the Google Play Store and the Apple App Store. If necessary, login to your August account.
Can you factory reset a lock?
A factory reset is only recommended if you are planning to get rid of the lock. You may also perform a factory reset as a last-resort troubleshooting method if the lock is not performing correctly. Once you have performed a factory reset, the action cannot be undone.
What do you need to know before transferring the August lock?
You should know that when you delete the account or the lock from your app, you completely lose control of the device and you can no longer access the lock and open or close your door, adjust settings, see the guest list, invite and remove guests from the app, get alerts when someone locks or unlocks the door.
How to transfer August Lock to a new owner?
In this chapter, I will show you the steps to do in order to change the August Lock ownership and give the new owner space to add their own account and take control of the gadget.
How to add a guest to your August Lock
It’s important to give access to family members, friends, and services listed in your contacts with August as this feature will give them the ability to enter your house when no one is there.
What a guest can do?
The guest will not have the same power on the lock as the owner and he will not be able to invite/remove guests and owners, use Auto-Unlock, view activity feed and guest list, or adjust the lock settings.
How to remove a guest from the August app?
As we mentioned before deleting your guests is possible when you’re the owner of the lock, So follow the instructions below to stop guests from entering your house:
Conclusion
So we’ve covered everything you need to know about transferring ownership of your August lock and how to add guests who can access your home while you’re away.
