How do you replace a floor in a mobile home?
- Remove the Trim and Floor Covering.
- Cut the Sub- Floor Out Around the Perimeter of the Room.
- Cut the Sub- Flooring Between the Joists.
- Inspect and Repair Joists.
- Add Insulation.
Full Answer
How to redo floors in a mobile home?
- Adds curb appeal and value to a mobile home.
- Acts as a deterrent for many critters and vermin that may damage air conditioning vents, ducts, wires, and even insulation underneath your property.
- Help keeps snow and water out from under the mobile home.
- Camouflages the foundation.
How can I replace the subfloor in a mobile home?
- Determine the area to be repaired
- Remove the damaged portion of the subfloor
- Attach floor joist supports for subfloor replacement
- Replace subfloor with new material
- Level new subfloor area
- Replace flooring over the repaired subfloor
How to choose the right flooring for a mobile home?
- A space is considered damp if it has a musty aroma in humid weather or occasionally feels damp or clammy.
- A space is very damp if it is always damp and musty.
- A space is wet if it occasionally has visible condensation or the ceiling or walls.
- A space is very wet if it always has visible condensation or standing water.
How to replace subflooring in a mobile home?
Mobile home floors are made so you can't just tare up a sub floor completely and replace it, as the walls are placed on top of it. Complete your own mobile home floor replacement. Attach floor joist supports for subfloor replacement. Remove the trim and floor covering. Bathroom floors are the most common floor problem in mobile homes. Replace ...
How do you repair a rotten floor in a mobile home?
6:4914:44How to repair a rotted mobile home floor Single Wide Mobile ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou see this 1 by 8 runs down that side there so we don't have to do a bunch of framing over hereMoreYou see this 1 by 8 runs down that side there so we don't have to do a bunch of framing over here which is a good thing. All we need is to make sure that our plywood breaks.
How do you change a floor in a mobile home?
4:208:51Mobile Home Floors Mobile Home Sub Floor Repair. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd have something home a new floor in there. So cut that run down a skill saw then you want to comeMoreAnd have something home a new floor in there. So cut that run down a skill saw then you want to come back with your sawzall and cut it like that flush at the wall. Cut some strips right out.
How do you replace a subfloor in an old mobile home?
This is a 'quick and dirty' list of the basic steps needed to replace flooring in a mobile home.Step 1: Remove the Trim and Floor Covering. ... Step 2: Cut the Sub-Floor Out Around the Perimeter of the Room. ... Step 3: Cut the Sub-Flooring Between the Joists. ... Step 4: Inspect and Repair Joists. ... Step 5: Add Insulation.More items...•
What is under the floor of a mobile home?
The mobile home's wood frame is usually made of 2X6, 2X8 or 2X10 floor joists. Then plywood, particleboard or OSB is placed on top of the wood frame to create the subfloor, also called the decking.
What is the best subfloor for a mobile home?
The most recommended subfloor material is 5/8″ plywood. If you can afford water resistant marine plywood for your kitchen, laundry, and bath that would be a good idea.
Can I put new subfloor over old subfloor?
Install a layer of at least ½” or preferably 5/8” ply over the existing planks. This is particularly important if your old sub floor has lumps and bumps in it. If you don't respect this thickness of ply, then you're highly likely to see rises and falls in your new flooring.
Why do mobile home floors get soft?
They occur when the subfloor gets wet, causing the sub floor material to fail. Soft spots frequently occur in bathrooms, under flower pots, below windows, and behind washing machines. Soft spots are less common in newer homes that have plywood or OSB (Oriented Strand Board) subfloors.
Which way do floor joists run in a mobile home?
Longitudinal floor joists run parallel to the long side of the mobile home.
How do you fix a rotted floor?
4:327:43How to Remove and Replace a Rotten Subfloor - YouTubeYouTubeStart of suggested clipEnd of suggested clipI used a reciprocating saw to clean up the edges of the flooring near the walls. And to get rid ofMoreI used a reciprocating saw to clean up the edges of the flooring near the walls. And to get rid of the rotten subfloor beneath the hardwood i removed several pieces of it to expose the rotten.
How long do mobile home floors last?
SHORT ANSWER. The U.S. Department of Housing and urban Development (HUD) tells us that the manufactured homes built today have a life expectancy of 30 to 55 years; of course depending on how well they are maintained. We feel this is a good estimate for the middle ground.
How much does it cost to replace a subfloor?
Cost to Repair Subfloor*12Subfloor repair, entire room$300 - $400Subfloor replacement, small area$400 - $500Subfloor replacement, entire room$570 - $720*Prices based on a 500-square-foot room for entire room, 100-square-feet for small area1 more row•Mar 24, 2022
When are subfloors installed in a manufactured home?
The subfloor and floor covering are installed before the walls when a manufactured home is built.
Which way should subflooring be laid?
Sub-flooring should be laid in the same direction as the original, usually opposite the direction of the joists.
How thick is a subfloor?
Measure Your Subfloor Thickness. Next, you will need to measure your subfloor. Most subfloors are either 3/4″ or 5/8″ thick. You will use the measurement to set your circular saw to the proper height. One of the most tedious parts of replacing subflooring in mobile homes is the removal of the original sub-flooring.
What is subflooring made of?
For many years, mobile homes have been constructed with sub-flooring made of particle board which is made from sawdust and glue that essentially acts like a sponge when it gets wet. Even the least amount of dampness causes bowing, warping, rot, and soft spots. Even in newer homes, where particle board wasn’t used, ...
What to do if a floor leak is rotting?
If a leak caused rotting or flooring warping and bowing you must find it and repair it before moving on to the next step. With the floor covering removed you will be able to trace the leak better. Follow the damage. Most of the time it will be a window or roofing issue and the water is running down the wall.
Where are the short joists placed?
See the short joists? Those are placed where the new subfloor panels meet .
What causes leaks in mobile homes?
Bad toilet rings and damages water supply lines are another common source of leaks in mobile homes. You can learn more about mobile home plumbing repair here.
What size is the most common flooring?
The most common type is plywood and we will focus on it. Measure its thickness, the most common sizes are ¾” and ⅝”.
Can you replace a carpet cover?
You can now easily replace the cover . There is a good chance that the cover would’ve been damaged during the removal process so you might want to buy a new one. Carpets are usually fixed in place with glue and an industrial stapler around the edges.
Is it easier to replace a floor than later?
We hope this guide has given you the confidence to tackle that floor repair project. Sooner is always better than later when it comes to your floor.
Do mobile homes have a foundation?
As you can imagine a mobile home’s floor comes under a lot of pressure over time. Unlike traditional stick-built homes, mobile homes don’t necessarily have a full foundation that supports the whole underbelly. Although the building standards for mobile homes have increased dramatically and the underbelly should be well supported by horizontal ...
Can you use vinyl tile in a bathroom?
However, if the flooring was done in the bathroom you should use vinyl or tiles to protect the floor from water damage. Vinyl simply glues back down to the surface, but tiles require a little more work.
How much does it cost to remodel a mobile home?
The cost of remodeling a mobile home with a double-wide is around $650-$800. For a full-fledged triple-wide or multi-section mobile home, the cost goes up to $900 - $1000. Another factor that is taken into consideration while determining the cost of leveling a mobile home is the age of the mobile home.
How do I remove carpet from a subfloor?
Remove the first line of layering, i.e. carpet or vinyl flooring done on the sub-floor before one starts cutting. Baring the floor will help in identifying the weak spots and will save the extra effort of cutting the first with the floor. Make sure the entire layer is stripped off and trimmed, especially the one near the bathroom and kitchen sink. While carpet can be removed by simply pulling, removing tiles is a bit more complicated and elaborate process.
What is the initial lining of a mobile home?
The initial lining is that of a floor joist, i.e. the horizontal framework spaced according to the shape and builded of the mobile home.
What is subflooring?
Sub-floor is the solid flat structure just beneath the actual floor resting on the joists that provides the first line of protection from anything entering from beneath. Be it animals, floor water or mould, sub-floor acts as the barrier and prevents the floor covering from any immediate damage.
How to check for a leak in a joist?
Look for possible damage and leaks in the joists. Use a hygrometer to measure the humidity underneath and/or any leakages or standing water at points. Repair all the pain points and check them thoroughly for future faults.
What is mobile home?
Mobile homes are a large rectangular container type structure pre-fabricated at a manufacturing site in the form of a house. These homes are attached to a steel frame underneath with wheels, which make them easy to move from one location to another. The concept came from residential caravans back in the 1960s and is a practical ...
What is the topmost layer of a floor?
The topmost layer or the finish floor is what meets the eye. While initially, it was only wood, now can choose to use anything from carpeting, solid wood and engineered wood to luxury vinyl and ceramic tile among others.
When repairing a floor, do you want to remove the entire area that feels spongy?
When repairing the floor, you will want to remove the entire area that feels spongy, soft or unlevel.
What happens when you repair a subfloor?
When a damaged subfloor is properly repaired, your new flooring should feel and look beautiful for many years to come. Not having any low spots or soft spots in your new floor makes your home feel solid and of better construction.
What does it mean when a subfloor is weak?
When the subfloor is getting weak, it feels very spongy or soft when you walk on it. If you feel a sponginess, or a soft spot, take tiny baby steps all around the area to get a feeling for how unlevel and spongy the area is. When repairing the floor, you will want to remove the entire area that feels spongy, soft or unlevel.
What is subfloor made of?
The subfloors of many older manufactured homes tend to be made of dense particle board. Over the years, this type of subfloor has the tendency to break down in heavy traffic areas within the home.
Why do we seal out moisture from the roof?
Sealing out moisture, whether from the roof, windows, doors, floor, skirting or ground is necessary to prevent buildup of dampness and mold. Keeping the moisture away to begin with is the ultimate weapon against buildup of dampness and mold.
How old is a soft spot on a floor?
Usually, every home more than 10 years old has developed a soft spot or two in the floor. If these are not repaired properly, they will often visually show up in the floor. Even worse is the feeling of sponginess as you walk across them.
Is it necessary to replace a floor?
Replacing the entire floor is not usually necessary. In another recent home that we did, there had been a leak in the laundry room and the subfloor was damaged in that room, as well as into the hallway and bathroom.
Why do I need to replace subfloors in my mobile home?
Soft spots and bowing are the two most common reasons to need to replace the subfloors in a mobile home and that is likely caused by water damage . I’d pull the floor covering up in the bathroom and kitchen first and see if you have any signs of water damage. Also, look around doors and windows and your laundry room.
What to consider when moving a manufactured home?
There are a couple of things to consider. Probably the most important is crossing the marriage line in a double or triple wide. It’s simply not as good of an idea because of the hassle it will be to remove the flooring if the home has to be moved for any reason. More than 90% of all manufactured homes remain in the same place as they were initially placed so it’s not a big deal, just something to keep in mind. Settling could be another issue – if one pier settles and the home becomes unlevel you may experience issues such as separated boards.
What kind of vinyl flooring should I use for a bathroom?
For bathrooms and kitchens, I like single sheet vinyl. It acts as a great water barrier and some of the higher-end vinyl has a nice padding to it which makes standing a little more comfortable. I wrote about luxury vinyl flooring options but the flooring we put in our bathroom was just the mid-grade vinyl from Lowe’s and I’ve been very happy with it.
What is floating floor?
I am a big fan of the floating floor or laminate as some call it. These are tongue and groove planks that fit together to create a single plane of flooring.
Can you put a floating floor over carpet?
I would think any additional layer you can get between you and the ground is a good idea. However, if water seeps under the floating floor it will probably mildew the carpet and cause mold so keep that in mind. Definitely don’t install a floating floor over carpet in a room with water.
Is OSB subflooring needed?
If your home has the standard OSB subflooring you may want to take this opportunity to go ahead and upgrade to a better material but if there is no damage to the original floor or you already have the upgraded plywood it isn’t necessary at all.
Do you need to buy all the flooring at once?
First, you will need to purchase all the flooring at one time so you can get the best match (they manufacture flooring in batches). You will also need to buy an extra box or 2 because about 10-15% of the planks will likely be damaged on the lips or corners (this is especially true with the cheaper brands).
