How do you remove a no visible toilet seat bolt?
- Step 1: Once again, carefully check the toilet. For example, recheck the seat hinge.
- Step 2: Realign the seats. But before you try to tighten the bolts, you will need to adjust the seat.
- Step 3: Tighten the screws.
- Step 4: Check the tension and close the lid.
Full Answer
How to remove the screws on a toilet seat?
Removing Seat with No Screws
- Gather the things you’ll need – hacksaw, protective wear, duct tape, rugs, and any knife.
- Open the toilet lid and cover the remaining part of the toilet with duct tape. ...
- Mark the areas you will be cutting through and sit the knife right underneath the toilet seat to guide you as you cut through.
- Begin to cut gently moving one side to the other. ...
How do you replace toilet seat bolts?
- Look carefully at the back of the toilet seat for any signs of bolts or screws. ...
- Now, that you found the bolts, you should tighten it slightly, if this is the problem with the toilet seat. ...
- Realign the toilet seat, so that it fits perfectly on the toilet before you fasten the bolts again. ...
How do you replace toilet flange bolts?
Replacing the toilet bolts without removing the toilet in a normal situation
- Shut down the water supply that’s connected to the toilet. ...
- Remove the lid from the toilet tank to have a better view of the water level when we flush the water once. ...
- Remove the plastic caps that are covering the toilet bolts on either side of the toilet. ...
- Now that you have uncovered the bolts, now it’s time to unscrew it. ...
How to remove toilet bolt caps like a pro?
Steps Of Removing Toilet Bolt Caps
- Step One: Avoid transferring germs from the toilet’s surfaces by putting on rubber gloves. ...
- Step Two: Make sure you can easily access the toilet bolt caps by closing the toilet seat. ...
- Step Three: Use the tip of a flat screwdriver or edge of a kitchen knife to pry the toilet bolt caps in an upward motion.
- Step Four. ...
- Step Five: Remove the screws and nuts. ...
How do you remove a hidden nut from a toilet seat?
1:523:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook. You can see there there's a little screw on the top. And we need to tighten up that screw. SoMoreLook. You can see there there's a little screw on the top. And we need to tighten up that screw. So we can take a phillips head screwdriver. Tighten that one up nicely.
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
How do you remove a screwless toilet seat?
0:157:55How to Remove and Install a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to do is press the two quick release buttons to remove the seat. So push this oneMoreFirst you need to do is press the two quick release buttons to remove the seat. So push this one this one on some seats you need to hold it in while lifting.
How do you replace hidden Toto toilet seat bolts?
0:572:16Toilet Seat Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipHoles. Next place a toilet seat over the mounting holes and insert the metal washers and mountingMoreHoles. Next place a toilet seat over the mounting holes and insert the metal washers and mounting bolts into the holes. Screw from the underside of the toilet the mounting bolts lock nuts.
How do you replace a concealed toilet seat?
0:203:14Concealed Toilet Seat Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you lift it up and apply pressure you can unscrew it at the same time just keep applying theMoreSo if you lift it up and apply pressure you can unscrew it at the same time just keep applying the pressure upwards these are the parts for the new install. And here's the toilet seat.
How do you remove top fix toilet seat fittings?
1:0910:18How to change a Pressalit toilet seat with top fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to remove the hinge out of the toilet you need Philips screwdriver or a little small spannerMoreSo to remove the hinge out of the toilet you need Philips screwdriver or a little small spanner would also work but just in screw and unscrew that from the toilet. Just loosen these off firstly.
How do you remove a quick release toilet seat?
1:148:01How to Remove & Replace a Toilet Seat (Soft Close & Quick Release)YouTubeStart of suggested clipEnd of suggested clipToo so once both the nuts have been removed on either side the lid should then just lift out like soMoreToo so once both the nuts have been removed on either side the lid should then just lift out like so and you'll be left with these two holes ready to add the new toilet seat.
How do you remove Bemis toilet seat bolts?
0:214:47Bemis Easy Clean and Change Toilet Seat Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipNut like that with the plastic nuts and bolts unfastened you can just take the whole toilet seat.MoreNut like that with the plastic nuts and bolts unfastened you can just take the whole toilet seat.
How do you remove a toilet seat from metal hinges?
Removing Older Toilet Seats The metal bolts are part of the toilet seat hinge hardware. Simply unscrew the nut from the attached bolt. Corroded bolts and nuts are harder to detach. To remove the nut from the seat hinge bolt, use a long socket and socket wrench to unscrew the nut.
How do you open the bolt cover on a toilet seat?
0:182:56Remove Toilet Seat - Replacing a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm just going to grab the nut underneath. And I'm going to turn it counterclockwise. And onceMoreAnd I'm just going to grab the nut underneath. And I'm going to turn it counterclockwise. And once it loosens up you should be able to grab it back in.
How do you take apart a Toto toilet seat?
0:272:11Dad Fixes Loose Toto Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike this like a flathead screwdriver. But a little one that has a pretty skinny end. So you canMoreLike this like a flathead screwdriver. But a little one that has a pretty skinny end. So you can shippi it through this tab and pop it up that's how you get to the screws.
How do you remove an adjustable toilet seat?
1:263:51How to Remove and Replace a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we have here is like half of a butterfly nut. So I'll just hold that in place as I unscrew.MoreSo what we have here is like half of a butterfly nut. So I'll just hold that in place as I unscrew. Okay so I'm holding it with on one hand underneath. So we're just gonna unscrew. It.
How to unscrew a bolt on a loo seat?
Other loo seat attachments can contain a wingnut securing the bolt head. Sometimes you can reach under the seat. Hold the wingnut and unscrew the bolt. A crescent wrench or tongue and groove pliers will hold the nut while unscrewing the bolt.
How to tighten toilet tank bolts?
You can tighten the mounting from underneath the toilet tank. By going underneath the bowl, turn the nuts from the seat clockwise until tight. Use a ratchet wrench containing a deep socket. This is the simplest way to tighten the bolts. You can also use an adjustable wrench.
What wrench to use to unscrew a seat bolt?
For tight spaces, you can use a basin wrench. When holding the nut in place, use the basin wrench to unscrew the plastic bolt or seat bolt or remove the plastic caps.
How to protect a toilet bowl from rusted bolts?
Protect the bowl by putting a putty knife by the bolt and under the location that you are cutting. By utilizing a small hacksaw, cut through the rusted bolts on the top of the toilet. Ensure the putty knife is always between the toilet and the hacksaw to prevent you from porcelain damage.
Why does my toilet seat loosen?
A loose toilet seat is a common issue caused by repeated seat movements from open, sitting, and closed. After a while, the toilet seat bolts loosen.
Can you replace a toilet seat with hidden bolts?
They are labeled as such because the bolts are not visible under a toilet pan. If you’re wondering how to replace toilet seat with hidden bolts, there are several steps in removing and replacing a toilet seat with hidden bolts. However, the process isn’t very complicated.
Can you remove a toilet seat?
The removal of a toilet seat should be a straightforward job. However, depending on the age of your toilet bowl seat, the hardware, and space, this may not be as easy as the user may want.
How to get toilet seat out of way?
It also lets you get the toilet seat out of the way. Detach the toilet seat from the toilet bowl. Most toilet seats come with a quick-release mechanism which allows for quick removal from their hinges. In most cases, you only need to pop the protective cap and slide the seat right off the hinges. Detaching the seat gives you better access to ...
How to remove a toilet seat with hidden hinges?
The first step to remove a toilet seat with hidden hinges or how to remove toilet seat with hidden fixings entails peeking behind the plastic caps. That lets you determine the kind of fastening mechanism you’re dealing with. Protect your hands by wearing protective gloves.
How to keep screws from rotating?
If the screws are secured by wingnuts in the lower side, you can use your hands to keep them from rotating as you work the top. Alternatively, you can use the socket wrench or a pair of pliers to hold the bolts as you tighten.
What screwdriver do I need for a slot head?
A flathead works for the slot head, but you’ll need a Philips screwdriver for the Philips’ head. Unscrew the screws, applying gentle pressure as you twist the screwdriver anti-clockwise. Using too much pressure might strip the screw head, making the task more challenging.
Why is it important to have a rusty toilet?
The exposure of metallic hinges to water and urine speeds up the rusting process. Rusty hinges and screws result in considerable play, causing the once stable seat to shift under your weight.
How to remove rust from toilet seat?
If the toilet is old and the seat is attached to it using metal bolts, you might have to use a penetrating oil such as WD40 on the bolt and nut. Apply the oil around the metallic bits and leave it to sit for up to 10 minutes. A solution of 1-part acetone and 9-part cooking oil can suffice if you don’t have any WD40 handy. That loosens the nut and bolt rust, making it easy to remove the screws.
What is the purpose of detaching the seat?
Detaching the seat gives you better access to the hinges. The shape of the screw determines the kind of screwdriver or tools you'll need to unfasten the hinge. Usually, you’ll be faced with a slot or Philip's head. A flathead works for the slot head, but you’ll need a Philips screwdriver for the Philips’ head.
How to remove toilet seat?
It’s a good thing most toilet seats can be removed easily by unfastening their connecting nuts and bolts. Should the hardware fastening your seat resist your best efforts, detach the stubborn seat with a socket set, a hacksaw, or a drill. Prevent corrosion and make the next removal easier by maintaining the seat through regular cleaning and by replacing worn out parts.
How to tighten a toilet bolt?
Rubber bushings can be bought at your local hardware store or home center. Slide the circular, rubber bushings up the threading side of the bolt with the tapered side of the bushing facing up at the toilet. Then tighten the nut with the tightening tool that came with the bushings.
How to hold a nut in place?
Grip the nut fastening the bolt firmly. You should find a nut screwed onto the threaded end of each bolt. Some nuts may have a shape similar to a wingnut, allowing you to hold it in place by hand. If you have a weak grip, the nut is not wingnut-shaped, or the nut is stuck, try gripping it with a pair of pliers or vice grips.
Why is my bolt head deforming?
Screwdrivers that are too small can cause the bolt head to deform, especially if the bolt is plastic. Use the largest size screwdriver that will fit your bolt head for best results.
How to break a toilet nut?
Some toilet designs may require a deep socket or socket extension for you to reach the nut. Turn the socket counterclockwise firm ly to break the nut loose. Apply steady moderate force with your socket wrench. If the nut doesn’t loosen, intensify the force on your wrench to high for a very short interval.
How to protect a toilet seat from scratches?
Take a broad knife, like a putty knife, and position it so it covers the porcelain of the toilet around the head of a bolt. This will protect against accidental scratches when you saw. Cut away at the hardware fastening the seat to your toilet a little bit at a time with the hacksaw. This process may take a while.
Why are the nuts on my toilet seat not sliding?
If the toilet seat isn't sliding around, the nuts are tight enough. You don't actually want to overtighten those nuts, since you may end up cracking the porcelain . If that happens, you're going to need to buy a new toilet!
What are the grey ends on a chrome car seat?
Try the grey ends on the each side of the chrome hinges, they are buttons or covers that allow the seat to be lifted clear. Click to expand... chris watkins said: Try the grey ends on the each side of the chrome hinges, they are buttons or covers that allow the seat to be lifted clear.
Do you have to remove the toilet seat?
You actually had no need to remove the toilet seat as you could have tightened it up in place.
How to remove plastic toilet seat from bowl?
Remove the plastic caps by easing your flathead screwdriver below the cap while popping it up. Remove the seat of the toilet from the bowl. Many toilet seats with a quick-release mechanism allow easy removal via the hinges.
What to do if you have not purchased a new toilet seat?
If you have not purchased a new toilet seat with its mounting kit, you should keep the old nuts, and other fixing accessories from the hinges , as they will be useful for mounting the new seat.
How to insert a flap in a bowl?
You must insert the new flap by placing it on the bowl and positioning its fixing rods in the corresponding holes. Then put on the gaskets, the two washers , then tighten the wing nuts on. The flap must be symmetrical and that’s it.
What is a toilet seat kit?
Generally, toilet seats are sold with a kit containing fixing rods, washers, gaskets, and nuts. We advise you to mount the fixing kit for the first time on the new toilet seat and a table-type work surface, outside the toilet, to check that all the parts are available and to understand the fixing mechanism.
Why change a toilet seat?
Why change the toilet seat. If your toilet seat is broken, changing it will prevent you from having to continually endure using a damaged object. It can also be a matter of safety, especially with elderly people who could slip if the toilet seat malfunctions and causes them to lose their balance.
What is the best fixing system for a toilet?
Choose stainless steel fixing systems because they are more resistant than plastic ones.
What do you need to replace a toilet seat?
Things you’ll need to replace a toilet seat. When choosing the new toilet seat, pay special attention to the material it was made from. There are wooden or plastic seats. If the material is too light, the toilet seat will be more likely to break after short use.
Where do old toilets screw into the floor?
Older toilets screwed directly through the pan base into the floor.
Why did they refuse to recolor the toilet?
I talked to the people who were supposed to have recolored the toilet. but their paper work says they refused the job because the toilet was unmovable. But they may have had one of their techs do such work off the books. because there is no insurance on it since they could not dry the color properly.
What is the best sealant for a toilet?
Many modern toilets have a pair of plastic multiholed brackets that are screwed to the floor, the toilet drops over these and screws through the side of the pan hold it in place. Silicone sealant is still advised.
Do toilets need silicone sealant?
Many toilets are held in place around their bases with silicone sealant only these days, especially if the cistern is fastened to the wall.
