How do you make Chinese handcuffs?
- Gather Your Materials. Things you will need:
- Make a Cylinder. First of all you will want to make a cylinder to make your trap around.
- Prepare Your Strips. 3 More Images.
- Weaving.
- Tigtening.
- Glue Up the Ends.
- More Srips.
- More Weaving.
How do you make a chain out of two cuffs?
Wrap the first strip around one of the large cuffs before gluing or taping it. Wrap the second small strip around the first small strip and so on to produce a paper chain. Attach the last link of the chain to the second large cuff and you are done.
How to make paper handcuffs for babies?
How to Make Paper Handcuffs 1 Fold a sheet of newspaper in half length-wise several times until you have a long strip about two inches wide. 2 Bend the sheet into a circular cuff just large enough to slip over your child's wrist. ... 3 Glue or tape the overlapping ends. ... 4 Create several smaller versions of the cuff. ... More items...
How do you tie the tail of a handcuff?
If conscious and able, they hold the lifting end; if not, the free tail is wrapped around the torso and tied back to the lifting end. Tying it: As shown in the animation the initial stages of the Handcuff Knot are exactly the same as those used when using Loops to tie a Clove Hitch.
How do you use a handcuff knot?
For added security the two ends can be tied together with one or more Overhand Knots. Use: In Search and Rescue Operations, the Handcuff Knot is avoided because of the inherent danger of damage to the victim. However, it is worth considering if there is no other way of rescuing someone trapped, e.g., in a crevice or in a hole below grade.
How do you make Chinese handcuffs at home?
Paper Chinese Finger TrapStep 1: Gather Your Materials. Things you will need: ... Step 2: Make a Cylinder. First of all you will want to make a cylinder to make your trap around. ... Step 3: Prepare Your Strips. ... Step 4: Weaving. ... Step 5: Tigtening. ... Step 6: Glue Up the Ends. ... Step 7: More Srips. ... Step 8: More Weaving.More items...
How are Chinese finger traps made?
The Chinese finger trap is traditionally made of bamboo, but this amusing toy can be easily crafted from an ordinary sheet of paper. Put your finger in this pretty paper tube and then try to pull it off. The harder you pull, the tighter the weave becomes. You're trapped!
How do you make a Chinese finger trap Suture?
3:438:25Suture Pattern: Chinese Finger Trap - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe don't need to do two if you want to you can it's not going to count against. You. So we have ourMoreWe don't need to do two if you want to you can it's not going to count against. You. So we have our shoestring knot. An x on the other side and a shoestring knot back at the starting.
How do you get a free Chinese finger trap?
The initial reaction of the victim is to pull their fingers outward, but this only tightens the trap. The way to escape the trap is to push the ends toward the middle, which enlarges the openings and frees the fingers.
What are Chinese finger traps made of?
Chinese finger traps are normally made of bamboo, a material that does not stretch, but they can also be made with fabric, ribbon, or even paper.
What is the Chinese rude finger?
It is performed by showing the back of a hand that has only the middle finger extended upwards, though in some locales, the thumb is extended. Extending the finger is considered a symbol of contempt in several cultures, especially in the Western world.
How do you tie a purse string suture?
1:052:47surgery purse string suturing medicine - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen the suture ends are knotted. This should create the effect of a sealer confidential tighteningMoreWhen the suture ends are knotted. This should create the effect of a sealer confidential tightening closure around the defect. Until all the edges approximate centrally into a closed purse.
How do you put a purse string suture on a dog?
A purse-string suture should be placed around the anus for five to seven days to prevent recurrence. The suture should be loose enough for fecal matter to pass, but sufficient to prevent recurrence of the prolapse during its placement.
How does a Chinese finger trap work physics?
The finger trap is such a mechanism—it converts tension force along the tube to a compression force across the tube through the braids. The applied force causes a structural transition. Another similar biological mechanism which ''strengthens'' with applied force is known as a ''catch-bond''.
What is the finger trap test?
It's a pretty simple concept: Touch your index finger to the tip of your nose and rest your hand against your chin. If your lips don't touch your finger, congrats—you're pretty! If they do, well, hopefully you at least have a good sense of humor.
What are medical finger traps used for?
Chinese finger traps are a valuable tool that can maintain traction while a cast is applied and can also be useful during fracture fixation. They are not readily available in many hospitals, however, particularly out of hours.
How do you use finger traps?
0:253:39How to Reduce and Hold a Distal Radius Fracture Using Finger TrapsYouTubeStart of suggested clipEnd of suggested clipYou just gently push the traps up the finger.MoreYou just gently push the traps up the finger.
Design
The tightening is simply a normal behavior of a cylindrical, helically wound braid, usually the common biaxial braid. Pulling the entire braid lengthens and narrows it.
Variants
One variation on the Chinese finger trap has uses in orthopedic medicine—namely, providing even pressure to the patient's digit (s) and at the same time immobilizing the joints—and serves a similar purpose as a traction device. Its development goes back to Austria in 1870 when Dr.
Cultural influence
The Chinese finger trap is a common metaphor for a problem that can be overcome by relaxing, i.e. not trying too hard to solve it; for example, in acceptance and commitment therapy. The gag has been used in a number of films and television productions, such as the Stan Laurel short Dr. Pyckle and Mr.
Step 1
Fold a sheet of newspaper in half length-wise several times until you have a long strip about two inches wide.
Step 2
Bend the sheet into a circular cuff just large enough to slip over your child's wrist. Cut the ends if they are too long, but allow about an inch of the paper to overlap.
Step 3
Glue or tape the overlapping ends. If you are using glue, hold the ends in place until the glue dries. Repeat Steps 1 through 3 to create a second cuff.
Step 4
Create several smaller versions of the cuff. Do this by cutting the newspaper to about one-quarter of its original size and folding it length-wise several times to create a strip.
Step 5
Wrap the first strip around one of the large cuffs before gluing or taping it. Wrap the second small strip around the first small strip and so on to produce a paper chain. Attach the last link of the chain to the second large cuff and you are done. You can make the chain as long as you like.
Overview
- Cut 2 1 1⁄2 centimetres (0.59 in) wide strips out of paper. Get some construction paper or colored printer paper that's about 11 to 12 inches (28 to 30 cm) long. Orient the paper landscape style, then use a pencil and a ruler to draw a set of 1 1⁄2 centimetres (0.59 in) wide strips. Cut the paper using a paper slicer or a craft blade and a metal straight edge.[1] X Rese…
- Cut another set of strips out of a contrasting color. Get another sheet of colored, 11 to 12 in (…
Design
Variants
A Chinese finger trap (also known as a Chinese finger puzzle, Chinese thumb cuff, Chinese handcuffs, and similar variants) is a gag toy used to play a practical joke on unsuspecting children and adults. The finger trap is a simple puzzle that traps the victim's fingers (often the index fingers) in both ends of a small cylinder woven from bamboo. The initial reaction of the victim is to pull their fi…
Cultural influence
The tightening is simply a normal behavior of a cylindrical, helically wound braid, usually the common biaxial braid. Pulling the entire braid lengthens and narrows it. The length is gained by reducing the angle between the warp and weft threads at their crossing points, but this reduces the radial distance between opposing sides and hence the overall circumference. The more one pulls, the more the circumference shrinks and the trap tightens. The same effect is used in specialized textile …
See also
One variation on the Chinese finger trap has uses in orthopedic medicine—namely, providing even pressure to the patient's digit(s) and at the same time immobilizing the joints—and serves a similar purpose as a traction device. Its development goes back to Austria in 1870 when Dr. Steinberger, a dentist at the Rudolfsspital in Vienna, reported the discovery of his doctoral st…
External links
The Chinese finger trap is a common metaphor for a problem that can be overcome by relaxing, i.e. not trying too hard to solve it; for example, in acceptance and commitment therapy. The gag has been used in a number of films and television productions, such as the Stan Laurel short Dr. Pyckle and Mr. Pryde (1925), the Our Gang short Moan and Groan, Inc. (1929), in "The Beast with Twenty Fingers" episode of Dobie Gillis, the "This Little Wiggy" episode of the American show Th…