How do you make a level string line?
- Tie one end of the string to a wooden stake.
- Measure out a length of string with the tape measure.
- Attach the bubble level to the middle of the length of string.
- Tie the string so you are able to slide it up and down on the wooden stake.
How do you use a string line level?
How to Use a String Line Level Gather the materials for the job: a line level, a length of string, a tape measure and some means of securing both ends of the string (usually two wooden posts in the ground). Secure the string to one side or corner of the area you want leveled.
How do you level the ground with string levelers?
Tie a string level to one wooden stake on the highest side of the yard and slide it down to the ground level. Stretch the string down to an adjacent stake, while sliding the level along the string.
How to string a plumb line for leveling a lawn?
Once you know the slope, you can proceed with calculations to properly level the lawn. To string a plumb line for leveling, you should pull a string very tightly between two stakes. What Is a Landscaping Grade?
How do you level a lawn mower string?
Secure the string to one side or corner of the area you want leveled. Attach the line level to the middle of the string using the small hooks on the line level. Pull the string tight while sliding the level up the string within eyeshot. Pull tightly enough to avoid any sag in the string.
What is a line level?
Johnson Level explains that a line level, or a “string” line level, is exactly what it sounds like: a level that hangs from a string. By hanging a line level from a string and pulling the string as taught as possible between two points (like two stakes), you can adjust one end or the other of the string to find the height at which a lower point would be level with a higher point. When the bubble in the level is exactly centered, you’re good to go.
How to find the grade of a bubble?
You would then subtract the height of the lower ground level from the higher ground level, divide the result by the length of the string and multiply by 100 to find the grade.
