How do you install a mulch kit on a John Deere x350? Fit the mulch plug onto the mower deck lip and remove the tape from the metal deflector and discharge chute so that it falls into place. Insert the carriage bolt into the mounting hole on the lower left side of the mower deck.
How do you put a mulching kit on a John Deere mower?
The 42-inch mulching kit fits on John Deere mower models X300, LT, LX and GX. The kit contains two mulching blades that replace the standard blades and a deflector cup that scatters the grass clippings. Park the mower on a level surface and disengage the blades. Lock the mower deck into the highest position. Engage the parking brake.
What is a John Deere 42 inch mower deck mulching kit?
The mulching kit for a John Deere 42-inch mower deck makes it possible to return nutrients to your lawn after cutting. The blades cut the grass finely without clumping and can help retain the moisture in your lawn.
How do you discharge a lawn mower with a mulch plug?
Secure the discharge chute and deflector in the upward position, using a piece of duct tape. Rotate the mower blades out of the way of the chute. Remove the locking wing nut from the carriage bolt on the mulch plug. Place the mulch plug into the discharge opening with the carriage bolt threads facing upward.
How do you mount a mulching blade on a riding mower?
Insert the carriage bolt into the mounting hole on the lower left side of the mower deck. Tighten the locking wing nut. Attach the mulching blades.
How do you install a John Deere mulching kit?
0:032:21Installing a John Deere Mulching cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo basically you can put the front end first. And then slip the rest into the group. And if youMoreSo basically you can put the front end first. And then slip the rest into the group. And if you notice it really fits in there without me even attaching those two bungee cords.
How do you install a mulching kit?
1:523:00Mulch Kit Installation on a 46 Cub Cadet Lawn Tractor - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo install the mulch plug lift the discharge chute. Up insert the mulch plug into the deck dischargeMoreTo install the mulch plug lift the discharge chute. Up insert the mulch plug into the deck discharge opening by fitting the bolt on the rear side of the mulch plug into the hole in the deck.
How do you fit a John Deere mulcher?
1:372:39How to Install GY00115 Mulching Cover for John Deere - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook for the hole right above your gauge wheel here that's where the first one goes alright. AndMoreLook for the hole right above your gauge wheel here that's where the first one goes alright. And then back here.
How do you install mulch guard?
2:334:28How to Install John Deere Mulch Plug GY00115 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the back side as you can see it's slotted. So we're gonna make sure and push that all the way. InMoreOn the back side as you can see it's slotted. So we're gonna make sure and push that all the way. In on the backside. Of our opening. Here. All right so once you have that seated.
Are mulching blades worth it?
Mulching blades are an excellent choice for use on lawns that receive a mowing every three to four days. Using mulching blades on overgrown grass can result in clogging under the deck and piles of grass on the cut lawn. Mulching is also an environmentally friendly way to deal with grass clippings.
How do you use mulch plugs?
0:492:24How To Attach A Mulching Plug To A Petrol Lawnmower - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you twist this and slide it in like. That. You can actually get that in there a little bit ofMoreIf you twist this and slide it in like. That. You can actually get that in there a little bit of fiddling about. And if you press this down. Like that the mulching plug actually locks into place.
How do you put a mulcher on a riding lawn mower?
0:000:49How to insert a mulching plug for ride-on mowers - YouTubeYouTubeStart of suggested clipEnd of suggested clipObviously taking off your grass bag as well then you insert the mulching plug into the chute. It'sMoreObviously taking off your grass bag as well then you insert the mulching plug into the chute. It's easiest the highest point and then you put these clips you'll see that there's two slots.How to insert a mulching plug for ride-on mowers - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you put a mulcher on a riding lawn mower?
What is a mulch blade?
Mulching blades are designed to cut finer grass clippings that can fall back into the grass to decompose. Mulching offers many benefits to the mower operator as well as the area being mowed. Making a simple switch can save users time and improve the areas appearance.Mulching Blades - Lawn Maintenance - Green Industry Proshttps://www.greenindustrypros.com › article › mulching-b...https://www.greenindustrypros.com › article › mulching-b...Search for: What is a mulch blade?
How do you mulch leaves with a tractor?
You might want to handle the layer of leaves on your lawn by turning them into mulch. The blades on your lawn tractor cut material into a fine mulch that can be left on your lawn. This method doesn't actually remove the leaves, it just creates a nutrient-rich mulch material that will settle between the blades of grass.How to Use a Lawn Tractor for Picking Up Leaves - Home Guideshttps://homeguides.sfgate.com › use-lawn-tractor-picking-...https://homeguides.sfgate.com › use-lawn-tractor-picking-...Search for: How do you mulch leaves with a tractor?
How to install mulching blades on a stud?
Attach the mulching blades. For the X300 models, place the mulching blade onto the stud with the arched side facing upward. Attach the beveled washer with the cupped side facing upward, followed by the nut. Tighten the nut to 50 pounds per foot, using a torque wrench. Repeat with the other blade.
How to remove bolts on X300?
For the X300 models, remove the nuts, using a wrench. Remove the beveled washers and blades. Alternatively, for the LT, LX and GX models, remove the bolts, using a wrench . Remove the washers, beveled washers and blades. Set the blades and components aside.
How to tighten a deflector cup on a lawn mower?
Ensure that the deflector cup is situated properly on the mower deck and attach the blade with the arched side facing upward. Tighten the bolt to 55 pounds per foot, using a torque wrench. Repeat with the other blade. av-override.
How to tighten a nut on a LT?
Repeat with the other blade. Alternatively, for the LT, GX and LX models, place the washer and beveled washer on the bolt with the cupped side facing upward.