How to Change Swamp Cooler Pads
- Step 1. Open your swamp cooler and locate the pads. Measure them with your measuring tape to discern the size your new...
- Step 2. Purchase new swamp cooler pads at your local hardware or home goods store. You should be able to find them in...
- Step 3. Remove the old swamp cooler pads by unscrewing the mesh screen that holds them in place.
How do you care for a swamp cooler?
To keep a swamp cooler performing the way it should, these cooler pads must be replaced on a regular basis. Follow these maintenance tips to care for your swamp cooler and ensure it’s working as effectively and efficiently as possible: Replace pads regularly: Pads for swamp coolers should be replaced on a routine basis.
How often should I replace my swamp cooler pads?
Waiting too long to replace swamp cooler pads can take a toll on the efficiency and cooling ability of your evaporative cooling unit, so follow recommendations for pad replacement as closely as possible. Invest in annual service appointments: An annual service appointment is essential to keep your swamp cooler working properly.
How to remove evaporative cooler pads?
The tools and materials used for the removal and installation of the evaporative cooler pads are: First thing is to shut off the water going to the cooler. I did this because I planned on draining the existing water out of the system. Next the panels holding the pads in place were removed.
What is a swamp cooler pad?
Swamp cooler pads are filters that allow air to pass through the cooling system without causing any water leaks or spills. Over time, swamp cooler pads will become dirty and clogged with debris, and this can inhibit airflow and reduce the effectiveness of your cooling system.
Do you need to replace swamp cooler pads?
Generally, it is recommended to clean the pads at least once every year or twice a year (before and after use) and replace them after 2-3 years.
How often should swamp cooler pads be replaced?
every 3-5 yearsFor homeowners that have Mastercool swamp coolers and a water softening system on their home, you should clean the pads annually and replace them every 3-5 years.
How much does it cost to replace swamp cooler pads?
Swamp Cooler Pad Replacement The average cost to replace a pad is $5-$90 per pad. If you hire a professional to do the job, the cost averages $65-$115, which includes the parts.
Can swamp cooler pads be cleaned?
If your cooling pads are intact and show no signs of mold or mildew, you can clean them instead of replacing them. To do this, remove the pad and use a vacuum cleaner to remove loose debris. Then place the pads on the ground outside and hose them off with clean water. Be sure to clean both sides.
Are all swamp cooler pads the same size?
There are three measurements that you have to be concerned with in evaporative air cooler pads – length, width, and height. Obtaining the right size for the make and model of your air cooler is critical. Too large and it's not going to fit inside of the unit properly.
How do you remove calcium deposits from swamp cooler pads?
#3 How to Remove Calcium Deposits from Swamp Cooler Pads The best cleaner is a simple mix of white vinegar and water. You should clean the water pan reservoir at the bottom of the cooling unit at least once a month throughout the season to prevent minerals from building up inside.
How long does a swamp cooler last?
But, while swamp coolers don't cost much to buy, they are a lot of work and money to maintain. Not only that, they are only warrantied to work for 5 years. Refrigerated air systems can last up to 20 years if properly maintained.
How do you clean cellulose pads?
1:143:32Cleaning Cool Cell Pads with Triple-C® - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a water hose with a spray nozzle attached. First rinse the pads from the inside out and thenMoreUse a water hose with a spray nozzle attached. First rinse the pads from the inside out and then rinse them from the outside in there's no need for a pressure washer.
What sizes do swamp cooler pads come in?
There are two sizes of pads available 8” and 12”. The thicker the pad the more water it can absorb. Many homeowners choose to upgrade their standard coolers to these types of coolers because of their cooling ability.
Can I run vinegar through my swamp cooler?
Add a cup of vinegar to the cooler pan and let the vinegar cycle through the system for up to an hour. This will eliminate odors, mold, mildew and some corrosion, calcium deposits and other types of build-up. Repeat one to two times a season or as needed.
Can I put bleach in my swamp cooler?
Bleach is one of the most common household cleaning chemicals, but it is not a good choice for your swamp cooler. Bleach should never be used in an evaporative cooler as it can damage the pans and possibly void your warranty. We recommend a cleaning solution made from a mix of vinegar and water.
How do you clean mold out of a swamp cooler?
Soak the reservoir with vinegar. To clean the water reservoir, pour distilled white vinegar inside it. Let the vinegar sit in the water reservoir for an hour. You can also rinse the water tank with mild soap and warm water.
Step 1
Open your swamp cooler and locate the pads. Measure them with your measuring tape to discern the size your new swamp cooler pads will need to be.
Step 2
Purchase new swamp cooler pads at your local hardware or home goods store. You should be able to find them in the heating, cooling and electrical section.
Step 3
Remove the old swamp cooler pads by unscrewing the mesh screen that holds them in place. Retain the screws. Remove the screen and simply pull the pads out.
Step 4
Install the new pads by placing them in the swamp cooler where the old pads were, and placing the mesh screen on top to hold them in place. Screw the mesh screen in securely.
Step 5
Roll the sides of the pads if you notice that they stick out past the mesh screen a little. Tuck them under the mesh screen for best results.
How do swamp coolers work?
You will however have to do some maintenance on the cooler by installing and then changing out the pads once in a while. Here are a few steps to help get you through the process with ease. Continue reading below Our Video of the Day.
Do you need to get bigger pads for a pad?
You should probably get pads that are little bit bigger then they need to be because you can just fold them back a little while you are installing them and it won't hurt at all. While you are checking the pad measurements though you can also check to make sure everything else is working properly inside.
Aspen Swamp Cooler Pads
The pads of an aspen cooler give you the most significant capacity of any standard cooler. There are two swamp cooler pads available in the market. They are 1 inch and 2 inches. As the thickness of pads increases, the cooler’s performance also increases because they absorb more water if the pad is thick.
Mastercool Swamp Cooler Pads
For the Aerocool and Mastercool cooler, the honeycomb shaper pads are the best pads for cooling and working processes. These pads have the incredible ability to absorb the maximum water in them, and that’s why these pads are better compared to the other pads.
In terms of swamp cooler pads, follow the instructions given below
It would be best if you kept a few things in mind when buying pads for your swamp cooler. Pads should possess a few characteristics.
Why do swamp cooler pads need to be replaced?
Over time, swamp cooler pads will become dirty and clogged with debris, and this can inhibit airflow and reduce the effectiveness of your cooling system . To keep a swamp cooler performing the way it should, these cooler pads must be replaced on a regular basis.
Why use swamp coolers?
Lots of people rely on swamp coolers to maintain a comfortable indoor environment when temperatures outside begin to climb. These cooling systems are incredibly effective in hot, dry climates, and they offer a number of great benefits for home and business owners alike.
