How to anchor a bookshelf to the wall?
How to Anchor a Bookshelf to a Wall 1 Stabilization Options. You can stabilize any shelf unit against a solid wall by securing it with corner brackets, but these require you to drill a hole in the side of ... 2 Find the Studs. ... 3 Attaching Furniture Braces. ... 4 Using Metal Braces. ...
How do you attach a bookcase to a plaster wall?
The spacing may vary if you have plaster walls; in that case, find each stud separately. You'll have to move the bookcase out of the way to attach furniture straps -- they go behind the bookcase, placed high enough on the wall to reach the top of the shelf unit.
How do you anchor shelving to plaster walls?
To anchor heavy shelving to plaster walls, use toggle bolts. They spread the weight-bearing pressure out from the point where the shelving is secured to the wall. Locate the vertical studs in the wall where the shelving will be located by sliding an electronic stud sensor over that space.
How do you attach a shelf to the wall?
Place an “L” bracket so that it is flush with the wall and the shelf. You can also use door chain latches in place of L brackets if you want to move the shelf regularly. Install the chain on the wall and the slide on the top of the shelf.
Why do you anchor books to the wall?
This is especially true for bookcases -- they're tall, unstable and particularly dangerous because of the weight of the books they hold.
How to find studs in a house?
The most reliable way to find studs is to use an electronic stud finder; turn the device on; run it along the wall, and mark the places where the light goes on or the meter signals the presence of a stud. In modern houses, studs have a standard separation of 16 inches, so locate one and you can find the others with a tape measure.
How far apart are studs?
In modern houses, studs have a standard separation of 16 inches, so locate one and you can find the others with a tape measure. The spacing may vary if you have plaster walls; in that case, find each stud separately. Advertisement.
Why attach a bookcase to a wall?
Attaching them to a wall is the best way to avoid accidents.
How to get a bookcase back on the wall?
Move your bookcase back into place, at the level where your screws are placed in the wall. Peel back the clear cover from the sticky adhesive and press the strap onto the top of the bookcase. For best results, don’t remove the adhesive strip to realign, or it may lose some of its hold.
How to install a L bracket on a shelf?
Drill the L bracket into the top of the shelf with your cordless screwdriver using screws that will go all the way through the top of the shelf.
How to secure a bookcase without books?
If possible, find two studs and secure the bookcase with two straps to ensure a good hold. Secure the bookcase into wall studs whenever possible, instead of using wall anchors. It is best to secure the bookcase without the books in it, and then fill it up once you are finished. Mark the stud locations with a pencil.
How to hold a bookcase against a pipe?
You would have to use the anchor straps to hold the bookcase against the pipes. Put a thin piece of foam insulation between bookcase and pipe.
How to draw a line between a bookcase and a wall?
Use a stepladder and a pencil to draw a horizontal line where your bookcase meets the wall.
How to secure items to shelves?
Use Velcro strips to secure objects to the shelves themselves. Adhere the bottom side to the top of a shelf and attach the other side to knickknacks or vases.
What is the anchoring kit made of?
Consumer Reports recommends kits with straps made from nylon webbing or braided steel cable. The anchoring kits are typically comprised of two brackets tethered by a strap or cable. One bracket screws directly into the piece of furniture; the other fastens into a stud in the wall.
Does glue damage walls?
Other methods like glue actually leave more damage on the wall and is harder to clean up when you want to move out.
Can you use baby safety straps on a bookcase?
Reddit user found baby safety straps as a solution. Nextstopplease writes, “I have used these baby safety locks on a thin bookcase and lightweight bathroom cabinet, after one year they’re still holding up! The adhesive is very strong and I can tighten the straps to ensure the furniture doesn’t wobble or move.”
Can landlords paint holes in walls?
I assume your landlord is wary of tenants making lots of holes in the walls. However, most landlords are okay if they patch up the holes and paint the wall when they move out. Do check with your landlord as safety should not be compromised.
Can you use command strips to anchor bookshelf?
As for Command strips, I don’t think the adhesive stickers have what it takes to anchor a bookshelf to the wall. If it’s just to stop them from wobbling when you open the doors, perhaps they’ll work. But as a safety measure , it is not what I would use.
